mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Fang Xieyan <fangxy@xiaopeng.com>
To: Andrew Morton <akpm@linux-foundation.org>,
	David Hildenbrand <david@kernel.org>, Zi Yan <ziy@nvidia.com>,
	Matthew Wilcox <willy@infradead.org>, Jan Kara <jack@suse.cz>,
	Hugh Dickins <hughd@google.com>, Carlos Maiolino <cem@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>,
	"Liam R . Howlett" <liam@infradead.org>,
	Nico Pache <nico.pache@linux.dev>,
	Ryan Roberts <ryan.roberts@arm.com>, Dev Jain <dev.jain@arm.com>,
	Barry Song <baohua@kernel.org>, Lance Yang <lance.yang@linux.dev>,
	Usama Arif <usama.arif@linux.dev>,
	Kiryl Shutsemau <kas@kernel.org>,
	Lorenzo Stoakes <ljs@kernel.org>,
	Vlastimil Babka <vbabka@kernel.org>,
	Mike Rapoport <rppt@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	Michal Hocko <mhocko@suse.com>,
	Muchun Song <muchun.song@linux.dev>,
	Kairui Song <kasong@tencent.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	linux-fsdevel@vger.kernel.org, linux-xfs@vger.kernel.org,
	Liu Chao <liuc63@xiaopeng.com>
Subject: [RFC PATCH 3/3] mm: enable filesystem page-cache large folios without THP
Date: Tue, 10 Nov 2026 11:52:05 +0800	[thread overview]
Message-ID: <20261110035205.3036-4-fangxy@xiaopeng.com> (raw)
In-Reply-To: <20261110035205.3036-1-fangxy@xiaopeng.com>

Ten filesystems already opt in to file-backed large folios by calling
mapping_set_large_folios() or mapping_set_folio_order_range() from their
inode setup, unconditionally.  Every accessor that reports those orders
is nevertheless compiled out when CONFIG_TRANSPARENT_HUGEPAGE is
disabled, so the opt-in silently has no effect today.

Gate the page cache order accessors on CONFIG_LARGE_FOLIO in addition to
CONFIG_TRANSPARENT_HUGEPAGE.  Both conditions are still spelled out even
though CONFIG_LARGE_FOLIO defaults to y when TRANSPARENT_HUGEPAGE is
enabled, so that file-backed large folios do not silently disappear if
that default is ever relaxed.

PREFERRED_MAX_PAGECACHE_ORDER is left as it is.  Deriving it from
CONFIG_PGTABLE_HAS_HUGE_LEAVES would let HUGETLB_PAGE raise the ceiling
on its own, to HPAGE_PMD_ORDER capped by MAX_XAS_ORDER.  On arm64 with
64K base pages that works out to order 11, a 128M folio, eight times
what an LF-only build advertises today; the figure is arithmetic, not a
measurement.  Without THP such folios cannot be PMD-mapped, so keeping
the existing order-8 limit avoids substantially increasing the maximum
page-cache allocation size without an established use case.

CONFIG_LARGE_FOLIO no longer only builds the split machinery, so its
Kconfig help text is updated to match.  The default also carries a
comment recording why THP must keep pulling this option in:
mm/folio_split.o is built from CONFIG_LARGE_FOLIO, while huge_memory.o,
built for THP, calls into it.  XFS also gates mounting
block sizes larger than the page size on
mapping_max_folio_size_supported(), which means large-block-size XFS
cannot be mounted at all when CONFIG_LARGE_FOLIO is disabled; the
rejection now points at the missing option instead of only reporting the
block size as unsupported.

shmem keeps its THP dependency.  shmem_alloc_and_add_folio() forces
orders to zero without THP, so the mapping is only opened large-folio
capable when CONFIG_TRANSPARENT_HUGEPAGE is enabled.  Advertising the
larger order while allocating order 0 would not be cosmetic:
generic_perform_write() sizes its write chunk from
mapping_max_folio_size() and passes that length to ->write_begin()
before clamping it to folio_size(), while shmem_write_begin() rejects
pos + len > i_size outright for F_SEAL_GROW.  A cross-EOF write would
then fail as a whole instead of being partially satisfied up to i_size.
THP=y kernels already behave that way; the point is not to spread that
behaviour to a configuration which gains no large folios from it.
Enabling shmem's large folios -- allocation, swap and split alike -- is
left to a separate series.

The stale comment on mapping_large_folio_support() is updated to match:
large folios are now gated on CONFIG_LARGE_FOLIO rather than on THP, and
CONFIG_LARGE_FOLIO is a default rather than a select from THP.

With CONFIG_TRANSPARENT_HUGEPAGE enabled the generated code is unchanged.
Without it, file-backed large folios become reachable for the first time.

Reviewed-by: Liu Chao <liuc63@xiaopeng.com>
Signed-off-by: Fang Xieyan <fangxy@xiaopeng.com>
---
 fs/xfs/xfs_super.c      |  2 ++
 include/linux/pagemap.h | 17 +++++++++++------
 mm/Kconfig              | 15 +++++++++++----
 mm/shmem.c              | 11 ++++++++++-
 4 files changed, 34 insertions(+), 11 deletions(-)

diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 5a06132aa..29548faec 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1864,6 +1864,8 @@ xfs_fs_fill_super(
 			xfs_warn(mp,
 "block size (%u bytes) not supported; Only block size (%zu) or less is supported",
 				mp->m_sb.sb_blocksize, max_folio_size);
+			if (!IS_ENABLED(CONFIG_LARGE_FOLIO))
+				xfs_warn(mp, "CONFIG_LARGE_FOLIO is not set");
 			error = -ENOSYS;
 			goto out_free_sb;
 		}
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 73af18a37..2102733c1 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -393,7 +393,8 @@ static inline void mapping_set_gfp_mask(struct address_space *m, gfp_t mask)
  */
 static inline size_t mapping_max_folio_size_supported(void)
 {
-	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) ||
+	    IS_ENABLED(CONFIG_LARGE_FOLIO))
 		return 1U << (PAGE_SHIFT + MAX_PAGECACHE_ORDER);
 	return PAGE_SIZE;
 }
@@ -418,7 +419,8 @@ static inline void mapping_set_folio_order_range(struct address_space *mapping,
 						 unsigned int min,
 						 unsigned int max)
 {
-	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
+	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
+	    !IS_ENABLED(CONFIG_LARGE_FOLIO))
 		return;
 
 	if (min > MAX_PAGECACHE_ORDER)
@@ -459,7 +461,8 @@ static inline void mapping_set_large_folios(struct address_space *mapping)
 static inline unsigned int
 mapping_max_folio_order(const struct address_space *mapping)
 {
-	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
+	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
+	    !IS_ENABLED(CONFIG_LARGE_FOLIO))
 		return 0;
 	return (mapping->flags & AS_FOLIO_ORDER_MAX_MASK) >> AS_FOLIO_ORDER_MAX;
 }
@@ -467,7 +470,8 @@ mapping_max_folio_order(const struct address_space *mapping)
 static inline unsigned int
 mapping_min_folio_order(const struct address_space *mapping)
 {
-	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
+	if (!IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) &&
+	    !IS_ENABLED(CONFIG_LARGE_FOLIO))
 		return 0;
 	return (mapping->flags & AS_FOLIO_ORDER_MIN_MASK) >> AS_FOLIO_ORDER_MIN;
 }
@@ -500,8 +504,9 @@ static inline pgoff_t mapping_align_index(const struct address_space *mapping,
 }
 
 /*
- * Large folio support currently depends on THP.  These dependencies are
- * being worked on but are not yet fixed.
+ * Large folio support is opt-in per mapping and requires CONFIG_LARGE_FOLIO.
+ * It does not depend on THP; CONFIG_LARGE_FOLIO defaults to y when
+ * CONFIG_TRANSPARENT_HUGEPAGE is enabled.
  */
 static inline bool mapping_large_folio_support(const struct address_space *mapping)
 {
diff --git a/mm/Kconfig b/mm/Kconfig
index 9f97ad698..7bbed71af 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -831,13 +831,20 @@ config LARGE_FOLIO
 	bool "Large folio support for the page cache (without THP)" if !TRANSPARENT_HUGEPAGE
 	depends on MMU
 	select XARRAY_MULTI
+	# Keep LARGE_FOLIO enabled whenever THP is enabled:
+	# huge_memory.o is built for TRANSPARENT_HUGEPAGE and calls into
+	# folio_split.o, which is built for LARGE_FOLIO.
 	default y if TRANSPARENT_HUGEPAGE
 	default n
 	help
-	  Build the folio split implementation for page-cache large folios
-	  even when transparent hugepages are disabled.  Transparent
-	  hugepages imply this option; this option alone does not enable
-	  large folio allocation, it only makes splitting them possible.
+	  Enable page-cache large folios even when transparent hugepages
+	  are disabled.  This option defaults to y when transparent
+	  hugepages are enabled.
+
+	  With this option enabled, filesystems that opt in per mapping get
+	  large folios in the page cache, and those folios can be split.
+	  Without it, page-cache folios stay order-0 even when a filesystem
+	  asks for a larger order.
 
 menuconfig TRANSPARENT_HUGEPAGE
 	bool "Transparent Hugepage Support"
diff --git a/mm/shmem.c b/mm/shmem.c
index 4686875a3..399c8c9f1 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -3327,7 +3327,16 @@ static struct inode *__shmem_get_inode(const struct mnt_idmap *idmap,
 	cache_no_acl(inode);
 	if (sbinfo->noswap)
 		mapping_set_unevictable(inode->i_mapping);
-	mapping_set_large_folios(inode->i_mapping);
+	/*
+	 * shmem large folios currently depend on THP:
+	 * shmem_alloc_and_add_folio() forces order 0 without it, and
+	 * advertising a larger mapping size makes
+	 * generic_perform_write() pass a length that shmem_write_begin()
+	 * rejects wholesale for F_SEAL_GROW before the folio size is
+	 * known.
+	 */
+	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE))
+		mapping_set_large_folios(inode->i_mapping);
 
 	switch (mode & S_IFMT) {
 	default:
-- 
2.50.1


  parent reply	other threads:[~2026-11-10  3:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10  3:52 [RFC PATCH 0/3] " Fang Xieyan
2026-11-10  3:52 ` [RFC PATCH 1/3] mm: move folio split code into mm/folio_split.c Fang Xieyan
2026-11-10  3:52 ` [RFC PATCH 2/3] mm: build file-backed folio splitting with CONFIG_LARGE_FOLIO Fang Xieyan
2026-11-10  3:52 ` Fang Xieyan [this message]
2026-11-10  4:01 ` [RFC PATCH 0/3] mm: enable filesystem page-cache large folios without THP Zi Yan
2026-11-10  4:10   ` Zi Yan
2026-11-10  4:11     ` Zi Yan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261110035205.3036-4-fangxy@xiaopeng.com \
    --to=fangxy@xiaopeng.com \
    --cc=akpm@linux-foundation.org \
    --cc=baohua@kernel.org \
    --cc=baolin.wang@linux.alibaba.com \
    --cc=cem@kernel.org \
    --cc=david@kernel.org \
    --cc=dev.jain@arm.com \
    --cc=hughd@google.com \
    --cc=jack@suse.cz \
    --cc=kas@kernel.org \
    --cc=kasong@tencent.com \
    --cc=lance.yang@linux.dev \
    --cc=liam@infradead.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=liuc63@xiaopeng.com \
    --cc=ljs@kernel.org \
    --cc=mhocko@suse.com \
    --cc=muchun.song@linux.dev \
    --cc=nico.pache@linux.dev \
    --cc=rppt@kernel.org \
    --cc=ryan.roberts@arm.com \
    --cc=surenb@google.com \
    --cc=usama.arif@linux.dev \
    --cc=vbabka@kernel.org \
    --cc=willy@infradead.org \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®