From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Mika Westerberg <westeri@kernel.org>,
Andreas Noever <andreas.noever@gmail.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>,
Sven Peter <sven@kernel.org>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org
Subject: Re: [PATCH v2 2/7] thunderbolt: Move ICM mailbox functions to icm.c and internalize interrupt work
Date: Tue, 10 Nov 2026 15:24:03 +0100 [thread overview]
Message-ID: <20261110142403.GB259790@black.igk.intel.com> (raw)
In-Reply-To: <20261110114925.722014-3-chunfeng.yun@mediatek.com>
On Tue, Nov 10, 2026 at 07:48:50PM +0800, Chunfeng Yun wrote:
> In preparation for modularizing PCIe NHI and ICM support as a separate
> driver, clean up internal helper functions so that they do not need to
> be exported:
>
> nhi_mailbox_cmd() and nhi_mailbox_mode() are only used by the Intel
> firmware Connection Manager (icm.c) to exchange mailbox commands with
> firmware running on Intel PCIe NHIs. The Thunderbolt core framework,
> software connection manager, and non-PCIe platform controllers do
> not use this mailbox interface. Move both functions into icm.c and
> mark them static.
>
> nhi_interrupt_work was previously initialized in pci.c within
> nhi_pci_init_msi(), requiring it to be visible across files. Move
> INIT_WORK(&nhi->interrupt_work, ...) into tb_nhi_probe() so that
> the workqueue item is initialized by the NHI core and
> nhi_interrupt_work() can be marked static in nhi.c.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
> new patch
> ---
> drivers/thunderbolt/icm.c | 59 ++++++++++++++++++++++++++++++++++++
> drivers/thunderbolt/nhi.c | 64 ++-------------------------------------
> drivers/thunderbolt/nhi.h | 3 --
> drivers/thunderbolt/pci.c | 2 --
> 4 files changed, 62 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
> index a295a5e6cc9c..736f551cd567 100644
> --- a/drivers/thunderbolt/icm.c
> +++ b/drivers/thunderbolt/icm.c
> @@ -45,6 +45,7 @@
> #define ICM_RETRIES 3
> #define ICM_APPROVE_TIMEOUT 10000 /* ms */
> #define ICM_MAX_LINK 4
> +#define ICM_MAILBOX_TIMEOUT 500 /* ms */
>
> static bool start_icm;
> module_param(start_icm, bool, 0444);
> @@ -269,6 +270,64 @@ static int pcie2cio_write(struct icm *icm, enum tb_cfg_space cs,
> return pci2cio_wait_completion(icm, 5000);
> }
>
> +/**
> + * nhi_mailbox_cmd() - Send a command through NHI mailbox
> + * @nhi: Pointer to the NHI structure
> + * @cmd: Command to send
> + * @data: Data to be send with the command
> + *
> + * Sends mailbox command to the firmware running on NHI.
> + *
> + * Return: %0 on success, negative errno otherwise.
> + */
> +static int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data)
> +{
> + ktime_t timeout;
> + u32 val;
> +
> + iowrite32(data, nhi->iobase + REG_INMAIL_DATA);
> +
> + val = ioread32(nhi->iobase + REG_INMAIL_CMD);
> + val &= ~(REG_INMAIL_CMD_MASK | REG_INMAIL_ERROR);
> + val |= REG_INMAIL_OP_REQUEST | cmd;
> + iowrite32(val, nhi->iobase + REG_INMAIL_CMD);
> +
> + timeout = ktime_add_ms(ktime_get(), ICM_MAILBOX_TIMEOUT);
> + do {
> + val = ioread32(nhi->iobase + REG_INMAIL_CMD);
> + if (!(val & REG_INMAIL_OP_REQUEST))
> + break;
> + usleep_range(10, 20);
> + } while (ktime_before(ktime_get(), timeout));
> +
> + if (val & REG_INMAIL_OP_REQUEST)
> + return -ETIMEDOUT;
> + if (val & REG_INMAIL_ERROR)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +/**
> + * nhi_mailbox_mode() - Return current firmware operation mode
> + * @nhi: Pointer to the NHI structure
> + *
> + * The function reads current firmware operation mode using NHI mailbox
> + * registers and returns it to the caller.
> + *
> + * Return: &enum nhi_fw_mode.
> + */
> +static enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi)
> +{
> + u32 val;
> +
> + val = ioread32(nhi->iobase + REG_OUTMAIL_CMD);
> + val &= REG_OUTMAIL_CMD_OPMODE_MASK;
> + val >>= REG_OUTMAIL_CMD_OPMODE_SHIFT;
> +
> + return (enum nhi_fw_mode)val;
> +}
> +
> static bool icm_match(const struct tb_cfg_request *req,
> const struct ctl_pkg *pkg)
> {
> diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
> index c574c336f25b..1e3a58636d3d 100644
> --- a/drivers/thunderbolt/nhi.c
> +++ b/drivers/thunderbolt/nhi.c
> @@ -35,8 +35,6 @@
> */
> #define RING_E2E_RESERVED_HOPID RING_FIRST_USABLE_HOPID
>
> -#define NHI_MAILBOX_TIMEOUT 500 /* ms */
> -
> static bool host_reset = true;
> module_param(host_reset, bool, 0444);
> MODULE_PARM_DESC(host_reset, "reset USB4 host router (default: true)");
> @@ -964,65 +962,7 @@ int tb_ring_throttling(struct tb_ring *ring, unsigned int interval_nsec)
> }
> EXPORT_SYMBOL_GPL(tb_ring_throttling);
>
> -/**
> - * nhi_mailbox_cmd() - Send a command through NHI mailbox
> - * @nhi: Pointer to the NHI structure
> - * @cmd: Command to send
> - * @data: Data to be send with the command
> - *
> - * Sends mailbox command to the firmware running on NHI.
> - *
> - * Return: %0 on success, negative errno otherwise.
> - */
> -int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data)
> -{
> - ktime_t timeout;
> - u32 val;
> -
> - iowrite32(data, nhi->iobase + REG_INMAIL_DATA);
> -
> - val = ioread32(nhi->iobase + REG_INMAIL_CMD);
> - val &= ~(REG_INMAIL_CMD_MASK | REG_INMAIL_ERROR);
> - val |= REG_INMAIL_OP_REQUEST | cmd;
> - iowrite32(val, nhi->iobase + REG_INMAIL_CMD);
> -
> - timeout = ktime_add_ms(ktime_get(), NHI_MAILBOX_TIMEOUT);
> - do {
> - val = ioread32(nhi->iobase + REG_INMAIL_CMD);
> - if (!(val & REG_INMAIL_OP_REQUEST))
> - break;
> - usleep_range(10, 20);
> - } while (ktime_before(ktime_get(), timeout));
> -
> - if (val & REG_INMAIL_OP_REQUEST)
> - return -ETIMEDOUT;
> - if (val & REG_INMAIL_ERROR)
> - return -EIO;
> -
> - return 0;
> -}
> -
> -/**
> - * nhi_mailbox_mode() - Return current firmware operation mode
> - * @nhi: Pointer to the NHI structure
> - *
> - * The function reads current firmware operation mode using NHI mailbox
> - * registers and returns it to the caller.
> - *
> - * Return: &enum nhi_fw_mode.
> - */
> -enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi)
> -{
> - u32 val;
> -
> - val = ioread32(nhi->iobase + REG_OUTMAIL_CMD);
> - val &= REG_OUTMAIL_CMD_OPMODE_MASK;
> - val >>= REG_OUTMAIL_CMD_OPMODE_SHIFT;
> -
> - return (enum nhi_fw_mode)val;
> -}
> -
> -void nhi_interrupt_work(struct work_struct *work)
> +static void nhi_interrupt_work(struct work_struct *work)
> {
> struct tb_nhi *nhi = container_of(work, typeof(*nhi), interrupt_work);
> int value = 0; /* Suppress uninitialized usage warning. */
> @@ -1331,6 +1271,8 @@ int tb_nhi_probe(struct tb_nhi *nhi)
> if (!nhi->tx_rings || !nhi->rx_rings || !nhi->interrupt_mask)
> return -ENOMEM;
>
> + INIT_WORK(&nhi->interrupt_work, nhi_interrupt_work);
> +
This has weird indent.
> nhi_reset(nhi);
>
> /* In case someone left them on. */
> diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
> index a36c62c49a5c..3dd6ace6150d 100644
> --- a/drivers/thunderbolt/nhi.h
> +++ b/drivers/thunderbolt/nhi.h
> @@ -27,11 +27,8 @@ enum nhi_mailbox_cmd {
> NHI_MAILBOX_ALLOW_ALL_DEVS = 0x23,
> };
>
> -int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data);
> -enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi);
> void nhi_enable_int_throttling(struct tb_nhi *nhi);
> void nhi_disable_interrupts(struct tb_nhi *nhi);
> -void nhi_interrupt_work(struct work_struct *work);
> irqreturn_t tb_nhi_isr(int irq, void *data);
> irqreturn_t tb_ring_msix(int irq, void *data);
> int tb_nhi_probe(struct tb_nhi *nhi);
> diff --git a/drivers/thunderbolt/pci.c b/drivers/thunderbolt/pci.c
> index 2f0abf4d27a3..275389903090 100644
> --- a/drivers/thunderbolt/pci.c
> +++ b/drivers/thunderbolt/pci.c
> @@ -206,8 +206,6 @@ static int nhi_pci_init_msi(struct tb_nhi *nhi)
> if (nvec < 0)
> return nvec;
>
> - INIT_WORK(&nhi->interrupt_work, nhi_interrupt_work);
> -
> irq = pci_irq_vector(pdev, 0);
> if (irq < 0)
> return irq;
> --
> 2.45.2
next prev parent reply other threads:[~2026-11-10 14:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-10 11:48 [PATCH 0/7] thunderbolt: Add support platform NHI driver Chunfeng Yun
2026-11-10 11:48 ` [PATCH v2 1/7] thunderbolt: Prefix NHI core functions with tb_ and tb_ring_ Chunfeng Yun
2026-11-10 12:42 ` Konrad Dybcio
2026-11-10 11:48 ` [PATCH v2 2/7] thunderbolt: Move ICM mailbox functions to icm.c and internalize interrupt work Chunfeng Yun
2026-11-10 14:24 ` Mika Westerberg [this message]
2026-11-10 11:48 ` [PATCH v2 3/7] thunderbolt: Make PCIe NHI support opt-in Chunfeng Yun
2026-11-10 11:48 ` [PATCH v2 4/7] thunderbolt: add platform NHI driver Chunfeng Yun
2026-11-10 12:43 ` Konrad Dybcio
2026-11-10 14:37 ` Mika Westerberg
2026-11-10 11:48 ` [PATCH v2 5/7] thunderbolt: increase the lane adapter link-up timeout value Chunfeng Yun
2026-11-10 14:39 ` Mika Westerberg
2026-11-10 11:48 ` [PATCH v2 6/7] thunderbolt: decouple the waiting time of TB_PORT_UNPLUGGED and TB_PORT_UP Chunfeng Yun
2026-11-10 14:40 ` Mika Westerberg
2026-11-10 11:48 ` [PATCH v2 7/7] thunderbolt: prevent pcie tunnel activation/teardown warnings Chunfeng Yun
2026-11-10 14:50 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110142403.GB259790@black.igk.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chunfeng.yun@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=sven@kernel.org \
--cc=westeri@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®