[PATCH v4 0/2] arm64: dts: qcom: Add HP OmniBook X 16-cp1

[Jeff Roach <jeff.roach0@gmail.com>]

This adds a device tree for the HP OmniBook X 16-cp1 (board 8F46), a 16"
laptop with the 12-core Snapdragon X2 Elite (Mahua).

v4 is rebased on qcom for-next, which now has the common Glymur/Mahua
regulator settings. Tested with Ubuntu's 7.3-based linux-qcom-x1e
kernel. Everything listed in patch 2 works there, including suspend
(s2idle).

Notes:
- DisplayPort at HBR2 needs "phy: qualcomm: qmp-combo: update DP PHY PLL
  programming on Glymur" v6 [1] (tested with v5). Without it the stream
  runs at half rate and the monitor shows no picture. With it, about 1 in
  4 plug-ins still gives no picture; replugging fixes it.
- The GPU is disabled. It works with "drm/msm: Mahua GPU support" [2]
  applied; I'll send a follow-up to enable it once that lands.
- Audio needs a topology and UCM config for the "HP-OmniBook-X16" model,
  which are not upstream yet. The headphone jack (SDCA) is not described.

This series was written with the help of an AI coding assistant
(Claude): the device tree started from glymur-hp-elitebook-x-g2q.dts and
the laptop's ACPI tables. I went through the regulators against the
ACPI power votes for v3. I reviewed it and tested it on the laptop.

Earlier bring-up report: [3]

Changes in v4:
- Rebase on qcom for-next: drop the PMIC includes, &apps_rsc, &tcsr,
  the SMB2370 repeaters and the phy supplies that mahua.dtsi and
  glymur-cob.dtsi now provide, and use the new regulator labels
- vreg_l2f0 is now 944 mV from the common file (was 936 mV); tested
- Keep refgen-supply = <&vreg_l1c1> on usb_2_qmpphy, which matches the
  ACPI power votes on this laptop
- Move the pcie4 endpoint under &pcie4_port0, since glymur.dtsi no
  longer has pcie4_port0_ep
- Link to v3: https://lore.kernel.org/r/20261028191800.27829-1-jeff.roach0@gmail.com

Changes in v3:
- Set vreg_l1f_e1 to 904 mV (was 880 mV, copied from the EliteBook) to
  match the ACPI power votes on this laptop, rename it to
  vreg_l1f_e1_0p9 (Konrad)
- Add Acked-by to patch 1 (Krzysztof)
- Link to v2: https://lore.kernel.org/r/20261026154001.9323-1-jeff.roach0@gmail.com

Changes in v2:
- Add static data-lanes to usb_2_qmpphy so the PHY uses USB3-only mode
  (reported by Sashiko)
- Drop the Assisted-by tag, describe the tool use in the changelog
  instead (Krzysztof)
- Link to v1: https://lore.kernel.org/r/20261024044650.9936-1-jeff.roach0@gmail.com

[1] https://lore.kernel.org/all/20261028-glymur-phy-v3-v6-0-1f1d2e565a66@oss.qualcomm.com/
[2] https://lore.kernel.org/all/20260925-mahua-gpu-v1-0-0fa0bfd8d315@oss.qualcomm.com/
[3] https://lore.kernel.org/all/CAAnD8Rb4ZZrHFWMJayabioB_8bOHh1mqZ5LCXZz0jTNGMA7UZQ@mail.gmail.com/

Jeff Roach (2):
  dt-bindings: arm: qcom: Add HP OmniBook X 16-cp1
  arm64: dts: qcom: Add HP OmniBook X 16-cp1

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/mahua-hp-omnibook-x16.dts   | 657 ++++++++++++++++++
 3 files changed, 659 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/mahua-hp-omnibook-x16.dts


base-commit: 14825c9204bad7f4e0bd3a528cbf4a7e24e757d0
-- 
2.55.0