[PATCH 04/12] arm64: dts: hisilicon: Describe ADV7533 supplies

["Rob Herring (Arm)" <robh@kernel.org>]

Add the ADV7533 power supply phandles for HiKey and HiKey960. Both
boards have a dedicated HDMI 1.8-V supply. HiKey has a 1.2-V PMIC rail,
while the ADV7533 on HiKey960 uses its HDMI 1.8-V supply for V1P2.
Describe the respective 3.3-V rails as well.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 14 ++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts    |  6 ++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index acecd2dfeeba..1b0ba3dd2cde 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -192,6 +192,14 @@ wlan_en: wlan-en-1-8v {
 		enable-active-high;
 	};
 
+	fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	firmware {
 		optee {
 			compatible = "linaro,optee-tz";
@@ -571,6 +579,12 @@ adv7533: adv7533@39 {
 		status = "okay";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		avdd-supply = <&ldo3>;
+		dvdd-supply = <&ldo3>;
+		pvdd-supply = <&ldo3>;
+		a2vdd-supply = <&ldo3>;
+		v3p3-supply = <&fixed_3v3>;
+		v1p2-supply = <&ldo3>;
 		adi,dsi-lanes = <4>;
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 229116477f1d..5f31569cf494 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -505,6 +505,12 @@ &i2c2 {
 	adv7533: adv7533@39 {
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		avdd-supply = <&ldo15>;
+		dvdd-supply = <&ldo15>;
+		pvdd-supply = <&ldo15>;
+		a2vdd-supply = <&ldo15>;
+		v3p3-supply = <&reg_vdd_3v3>;
+		v1p2-supply = <&ldo22>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
 		pd-gpios = <&gpio0 4 0>;

-- 
2.53.0