mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: broonie@kernel.org, lee@kernel.org
Cc: lgirdwood@gmail.com, linux-sound@vger.kernel.org,
	linux-kernel@vger.kernel.org, mfd@lists.linux.dev,
	patches@opensource.cirrus.com
Subject: [PATCH 2/2] ASoC: cs42l43: Update load detect procedure for cs42l43b
Date: Wed, 11 Nov 2026 17:10:32 +0000	[thread overview]
Message-ID: <20261111171032.1491717-3-ckeepax@opensource.cirrus.com> (raw)
In-Reply-To: <20261111171032.1491717-1-ckeepax@opensource.cirrus.com>

The newer variants requires a slightly different process for the load
detection. It is no longer necessary to apply different tuning for 3 vs
4-pole headsets, but a new field does require updated for CTIA vs OMTP
headsets. Update the driver to follow the correct process for this
new version of the chip.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/cs42l43-jack.c | 101 +++++++++++++++++++++-----------
 1 file changed, 67 insertions(+), 34 deletions(-)

diff --git a/sound/soc/codecs/cs42l43-jack.c b/sound/soc/codecs/cs42l43-jack.c
index a2555dd9229e3..b3f89c712ed93 100644
--- a/sound/soc/codecs/cs42l43-jack.c
+++ b/sound/soc/codecs/cs42l43-jack.c
@@ -324,6 +324,11 @@ irqreturn_t cs42l43_bias_detect_clamp(int irq, void *data)
 #define CS42L43_JACK_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | \
 			      SND_JACK_BTN_3 | SND_JACK_BTN_4 | SND_JACK_BTN_5)
 
+#define CS42L43_TYPE_CTIA 0x0
+#define CS42L43_TYPE_OMTP 0x1
+#define CS42L43_TYPE_3POLE 0x2
+#define CS42L43_TYPE_OPEN 0x3
+
 static inline bool cs42l43_jack_present(struct cs42l43_codec *priv)
 {
 	struct cs42l43 *cs42l43 = priv->core;
@@ -502,9 +507,11 @@ static const struct reg_sequence cs42l43_4pole_patch[] = {
 	{ 0x4000,	0x00000000 },
 };
 
-static void cs42l43_start_load_detect(struct cs42l43_codec *priv, bool mic)
+static void cs42l43_start_load_detect(struct cs42l43_codec *priv, int type)
 {
 	struct cs42l43 *cs42l43 = priv->core;
+	const struct reg_sequence *patch;
+	int size;
 
 	dev_dbg(priv->dev, "Start load detect\n");
 
@@ -526,14 +533,36 @@ static void cs42l43_start_load_detect(struct cs42l43_codec *priv, bool mic)
 			dev_err(priv->dev, "Load detect HP power down timed out\n");
 	}
 
-	if (mic)
-		regmap_multi_reg_write_bypassed(cs42l43->regmap,
-						cs42l43_4pole_patch,
-						ARRAY_SIZE(cs42l43_4pole_patch));
-	else
-		regmap_multi_reg_write_bypassed(cs42l43->regmap,
-						cs42l43_3pole_patch,
-						ARRAY_SIZE(cs42l43_3pole_patch));
+	switch (cs42l43->variant_id) {
+	case CS42L43_DEVID_VAL:
+		switch (type) {
+		case CS42L43_TYPE_3POLE:
+		case CS42L43_TYPE_OPEN:
+			patch = cs42l43_3pole_patch;
+			size = ARRAY_SIZE(cs42l43_3pole_patch);
+			break;
+		default:
+			patch = cs42l43_4pole_patch;
+			size = ARRAY_SIZE(cs42l43_4pole_patch);
+			break;
+		}
+		break;
+	default:
+		patch = cs42l43_4pole_patch;
+		size = ARRAY_SIZE(cs42l43_4pole_patch);
+
+		switch (type) {
+		case CS42L43_TYPE_OMTP:
+			regmap_write(cs42l43->regmap, CS42L43B_LOAD_DET_SEL, 0x89);
+			break;
+		default:
+			regmap_write(cs42l43->regmap, CS42L43B_LOAD_DET_SEL, 0x98);
+			break;
+		}
+		break;
+	}
+
+	regmap_multi_reg_write_bypassed(cs42l43->regmap, patch, size);
 
 	regmap_update_bits(cs42l43->regmap, CS42L43_BLOCK_EN3,
 			   CS42L43_ADC1_EN_MASK | CS42L43_ADC2_EN_MASK, 0);
@@ -586,6 +615,14 @@ static void cs42l43_stop_load_detect(struct cs42l43_codec *priv)
 			   CS42L43_ADC1_EN_MASK | CS42L43_ADC2_EN_MASK,
 			   priv->adc_ena);
 
+	switch (cs42l43->variant_id) {
+	case CS42L43_DEVID_VAL:
+		break;
+	default:
+		regmap_write(cs42l43->regmap, CS42L43B_LOAD_DET_SEL, 0x0);
+		break;
+	}
+
 	if (priv->hp_ena && !priv->hp_ilimited) {
 		unsigned long time_left;
 
@@ -605,7 +642,7 @@ static void cs42l43_stop_load_detect(struct cs42l43_codec *priv)
 	snd_soc_dapm_mutex_unlock(snd_soc_component_to_dapm(priv->component));
 }
 
-static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)
+static int cs42l43_run_load_detect(struct cs42l43_codec *priv, int type)
 {
 	struct cs42l43 *cs42l43 = priv->core;
 	unsigned int val = 0;
@@ -613,7 +650,7 @@ static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)
 
 	reinit_completion(&priv->load_detect);
 
-	cs42l43_start_load_detect(priv, mic);
+	cs42l43_start_load_detect(priv, type);
 	time_left = wait_for_completion_timeout(&priv->load_detect,
 						msecs_to_jiffies(CS42L43_LOAD_TIMEOUT_MS));
 	cs42l43_stop_load_detect(priv);
@@ -629,23 +666,25 @@ static int cs42l43_run_load_detect(struct cs42l43_codec *priv, bool mic)
 	if (!cs42l43_jack_present(priv))
 		return -ENODEV;
 
-	if (mic) {
+	switch (type) {
+	case CS42L43_TYPE_3POLE:
+	case CS42L43_TYPE_OPEN:
+		switch (val & CS42L43_AMP3_RES_DET_MASK) {
+		case 0x0: // < 22 Ohm impedance
+		case 0x1: // < 150 Ohm impedance
+		case 0x2: // < 1000 Ohm impedance
+			return CS42L43_JACK_HEADPHONE;
+		case 0x3: // > 1000 Ohm impedance
+			return CS42L43_JACK_LINEOUT;
+		default:
+			return -EINVAL;
+		}
+	default:
 		cs42l43_start_hs_bias(priv, false);
 		cs42l43_start_button_detect(priv);
 
 		return CS42L43_JACK_HEADSET;
 	}
-
-	switch (val & CS42L43_AMP3_RES_DET_MASK) {
-	case 0x0: // < 22 Ohm impedance
-	case 0x1: // < 150 Ohm impedance
-	case 0x2: // < 1000 Ohm impedance
-		return CS42L43_JACK_HEADPHONE;
-	case 0x3: // > 1000 Ohm impedance
-		return CS42L43_JACK_LINEOUT;
-	default:
-		return -EINVAL;
-	}
 }
 
 static int cs42l43_run_type_detect(struct cs42l43_codec *priv)
@@ -686,18 +725,12 @@ static int cs42l43_run_type_detect(struct cs42l43_codec *priv)
 	if (!cs42l43_jack_present(priv))
 		return -ENODEV;
 
-	switch (type & CS42L43_HSDET_TYPE_STS_MASK) {
-	case 0x0: // CTIA
-	case 0x1: // OMTP
-	case 0x4:
-		return cs42l43_run_load_detect(priv, true);
-	case 0x2: // 3-pole
-		return cs42l43_run_load_detect(priv, false);
-	case 0x3: // Open-circuit
+	type &= CS42L43_HSDET_TYPE_STS_MASK;
+
+	if (type == CS42L43_TYPE_OPEN)
 		return CS42L43_JACK_EXTENSION;
-	default:
-		return -EINVAL;
-	}
+	else
+		return cs42l43_run_load_detect(priv, type);
 }
 
 void cs42l43_clear_jack(struct cs42l43_codec *priv)
-- 
2.47.3


      parent reply	other threads:[~2026-11-11 17:13 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-11 17:10 [PATCH 0/2] Update cs42l43b load detection proceedure Charles Keepax
2026-11-11 17:10 ` [PATCH 1/2] mfd: cs42l43: Add load detection register needed for cs42l43b Charles Keepax
2026-11-11 17:10 ` Charles Keepax [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261111171032.1491717-3-ckeepax@opensource.cirrus.com \
    --to=ckeepax@opensource.cirrus.com \
    --cc=broonie@kernel.org \
    --cc=lee@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=mfd@lists.linux.dev \
    --cc=patches@opensource.cirrus.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®