From: Will Porter <mrwillporter@gmail.com>
To: Christian Ruppert <arc@gmx.li>
Cc: Takashi Iwai <tiwai@suse.com>, Jaroslav Kysela <perex@perex.cz>,
linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Andrews <neil@androos.io>
Subject: [RFC PATCH 4/6] ALSA: mixer_audient: Fill the cache on first use
Date: Wed, 11 Nov 2026 20:37:18 -0600 [thread overview]
Message-ID: <20261112023720.1503814-5-mrwillporter@gmail.com> (raw)
In-Reply-To: <20261112023720.1503814-1-mrwillporter@gmail.com>
The probe reads every channel of a cached control. That is not
necessary: a get or put of a channel whose cache bit is clear already
reads the device and fills the cache.
Remove the probe read of cached controls. A failed first read returns
its error to the caller and leaves the cache bit clear, so the next
call reads again.
This changes behaviour. The probe sends no GET for a cached control:
that is 12 fewer requests on the EVO4 and 56 fewer on the iD14 MkI. A
failed read no longer logs "cannot read channel" at probe. A put to a
channel whose cache bit is clear first sends a GET, then sends a SET
only if the value differs.
The probe write of the init value of write-only controls stays.
Assisted-by: Claude:claude-fable-5-2
Assisted-by: Claude:claude-sonnet-5-5
Signed-off-by: Will Porter <mrwillporter@gmail.com>
---
sound/usb/mixer_audient.c | 22 ++++------------------
1 file changed, 4 insertions(+), 18 deletions(-)
diff --git a/sound/usb/mixer_audient.c b/sound/usb/mixer_audient.c
index 1bc6b4bbd2910..ff7bf518743ee 100644
--- a/sound/usb/mixer_audient.c
+++ b/sound/usb/mixer_audient.c
@@ -1091,10 +1091,10 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
elem->get_cur_broken = 1;
/*
- * A failed probe transfer must not fail the card: warn and keep the
- * control. Its cache bit stays clear, so a cached control reads the
- * device again on its next get, and a write-only control shows an
- * unknown value until a put succeeds.
+ * A cached control reads the device on its first get or put. A
+ * write-only control is written once at probe. A failed probe write
+ * must not fail the card: warn and keep the control. Its cache bit
+ * stays clear, so it shows an unknown value until a put succeeds.
*/
if (ctype->access == SND_AUDIENT_ACCESS_WRITE_ONLY) {
int i;
@@ -1108,20 +1108,6 @@ static int snd_audient_add_ctrl(struct usb_mixer_interface *mixer,
"%s: cannot set channel %d (%d)\n",
ctrl->name, i, ret);
}
- } else if (ctype->access == SND_AUDIENT_ACCESS_CACHED) {
- int i;
-
- for (i = 0; i < ctrl->hwchannels; i++) {
- u32 val;
-
- ret = snd_audient_raw_get_one(elem, ctype, i,
- ctrl->val_offs + i,
- &val);
- if (ret < 0)
- usb_audio_warn(mixer->chip,
- "%s: cannot read channel %d (%d)\n",
- ctrl->name, i, ret);
- }
}
kctl = snd_ctl_new1(&knew, elem);
--
2.47.3
next prev parent reply other threads:[~2026-11-12 2:37 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <sashiko-outbox-201869@kernel.org>
2026-11-06 20:29 ` [RFC PATCH 13/16] ALSA: mixer_audient: Add enumerated controls Will Porter
2026-11-09 22:30 ` Christian Ruppert
2026-11-10 2:13 ` Will Porter
2026-11-10 20:57 ` Christian Ruppert
2026-11-12 2:37 ` [RFC PATCH 0/6] ALSA: mixer_audient: Cache rework and simplifications Will Porter
2026-11-12 2:37 ` [RFC PATCH 1/6] ALSA: mixer_audient: Fold in the review changes to patches 12-16 Will Porter
2026-11-12 2:37 ` [RFC PATCH 2/6] ALSA: mixer_audient: Use the cache of usb_mixer_elem_info Will Porter
2026-11-12 2:37 ` [RFC PATCH 3/6] ALSA: mixer_audient: Replace three flags with an access mode Will Porter
2026-11-12 2:37 ` Will Porter [this message]
2026-11-12 2:37 ` [RFC PATCH 5/6] ALSA: mixer_audient: Use one get and one put for all control types Will Porter
2026-11-12 2:37 ` [RFC PATCH 6/6] ALSA: mixer_audient: Use the same cache for the iD14 MkI FU 12 control Will Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112023720.1503814-5-mrwillporter@gmail.com \
--to=mrwillporter@gmail.com \
--cc=arc@gmx.li \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=neil@androos.io \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®