mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@kernel.org>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Jijie Shao <shaojijie@huawei.com>,
	Simon Horman <horms@kernel.org>,
	Runyu Xiao <runyu.xiao@seu.edu.cn>,
	David Yang <mmyangfl@gmail.com>,
	Herbert Valerio Riedel <hvr@gnu.org>,
	Jeff Garzik <jeff@garzik.org>,
	Danny Kukawka <danny.kukawka@bisect.de>,
	Mugunthan V N <mugunthanvnm@ti.com>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	linux-kernel@vger.kernel.org (open list),
	Manuel Lauss <manuel.lauss@gmail.com>
Subject: [PATCH net v2 08/12] net: au1000: restore receive filtering before enabling RX
Date: Wed, 11 Nov 2026 20:52:50 -0800	[thread overview]
Message-ID: <20261112045301.3669532-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20261112045301.3669532-1-f.fainelli@gmail.com>

MAC initialization overwrites the receive mode, dropping promiscuous and
multicast settings after a watchdog reset without notifying the network
stack. Restore the requested filtering before the control write that
enables RX, avoiding a window with the wrong filter.

Factor receive-mode programming into a helper shared by initialization
and the receive-mode callback. Hold the address-list lock before the
device lock through initialization so the filter snapshot stays current.
Protect callback control-register updates with the device lock as well.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/amd/au1000_eth.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/amd/au1000_eth.c b/drivers/net/ethernet/amd/au1000_eth.c
index f127c0184036..67f4899c34a6 100644
--- a/drivers/net/ethernet/amd/au1000_eth.c
+++ b/drivers/net/ethernet/amd/au1000_eth.c
@@ -683,6 +683,8 @@ static const struct ethtool_ops au1000_ethtool_ops = {
 	.set_link_ksettings = phy_ethtool_set_link_ksettings,
 };
 
+static u32 au1000_rx_mode(struct net_device *dev, u32 reg);
+
 /*
  * Initialize the interface.
  *
@@ -704,6 +706,7 @@ static int au1000_init(struct net_device *dev)
 	/* bring the device out of reset */
 	au1000_enable_mac(dev, 1);
 
+	netif_addr_lock_bh(dev);
 	spin_lock_irqsave(&aup->lock, flags);
 
 	writel(0, &aup->mac->control);
@@ -736,11 +739,14 @@ static int au1000_init(struct net_device *dev)
 		control |= MAC_FULL_DUPLEX;
 	}
 
+	control = au1000_rx_mode(dev, control);
+
 	writel(control, &aup->mac->control);
 	writel(0x8100, &aup->mac->vlan1_tag); /* activate vlan support */
 	wmb(); /* drain writebuffer */
 
 	spin_unlock_irqrestore(&aup->lock, flags);
+	netif_addr_unlock_bh(dev);
 	return 0;
 }
 
@@ -1034,13 +1040,12 @@ static void au1000_tx_timeout(struct net_device *dev, unsigned int txqueue)
 	netif_wake_queue(dev);
 }
 
-static void au1000_multicast_list(struct net_device *dev)
+/* Caller holds the address-list lock and aup->lock. */
+static u32 au1000_rx_mode(struct net_device *dev, u32 reg)
 {
 	struct au1000_private *aup = netdev_priv(dev);
-	u32 reg;
 
 	netif_dbg(aup, drv, dev, "%s: flags=%x\n", __func__, dev->flags);
-	reg = readl(&aup->mac->control);
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		reg |= MAC_PROMISCUOUS;
 	} else if ((dev->flags & IFF_ALLMULTI)  ||
@@ -1061,7 +1066,19 @@ static void au1000_multicast_list(struct net_device *dev)
 		reg &= ~(MAC_PROMISCUOUS | MAC_PASS_ALL_MULTI);
 		reg |= MAC_HASH_MODE;
 	}
+	return reg;
+}
+
+static void au1000_multicast_list(struct net_device *dev)
+{
+	struct au1000_private *aup = netdev_priv(dev);
+	unsigned long flags;
+	u32 reg;
+
+	spin_lock_irqsave(&aup->lock, flags);
+	reg = au1000_rx_mode(dev, readl(&aup->mac->control));
 	writel(reg, &aup->mac->control);
+	spin_unlock_irqrestore(&aup->lock, flags);
 }
 
 static const struct net_device_ops au1000_netdev_ops = {
-- 
2.53.0


  parent reply	other threads:[~2026-11-12  4:54 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-12  4:52 [PATCH net v2 00/12] net: au1000: Bug fixes Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 01/12] net: au1000: recycle RX descriptors on allocation failure Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 02/12] net: au1000: clear all-multicast mode when restoring hash filtering Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 03/12] net: au1000: disconnect the PHY before freeing the MDIO bus Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 04/12] net: au1000: report MDIO transaction timeouts Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 05/12] net: au1000: serialize TX completion with packet submission Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 06/12] net: au1000: assign a valid MAC address without platform data Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 07/12] net: au1000: fix buffer descriptor free list insertion Florian Fainelli
2026-11-12  4:52 ` Florian Fainelli [this message]
2026-11-12  4:52 ` [PATCH net v2 09/12] net: au1000: restore RX buffer addresses when restarting the MAC Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 10/12] net: phy: smsc: wait for LAN83C183 power-down recovery Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 11/12] net: au1000: keep the MAC stopped until the PHY link is ready Florian Fainelli
2026-11-12  4:52 ` [PATCH net v2 12/12] net: au1000: reject frames larger than the TX bounce buffer Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261112045301.3669532-9-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=danny.kukawka@bisect.de \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=hvr@gnu.org \
    --cc=jeff@garzik.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=manuel.lauss@gmail.com \
    --cc=mmyangfl@gmail.com \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=runyu.xiao@seu.edu.cn \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=shaojijie@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®