From: Myeonghun Pak <mhun512@gmail.com>
To: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Ioana Radulescu <ruxandra.radulescu@nxp.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Ijae Kim <ae878000@gmail.com>,
stable@vger.kernel.org
Subject: [PATCH net] dpaa2-eth: free the DPNI interrupt before releasing its resources
Date: Thu, 12 Nov 2026 01:56:16 -0500 [thread overview]
Message-ID: <20261112065616.34209-1-mhun512@gmail.com> (raw)
dpaa2_eth_remove() and the probe error path call fsl_mc_free_irqs(),
which returns MC interrupt resources without removing the devm-managed
handler. Until devres runs, a link or endpoint change can race with MAC
disconnection or access the freed MC portal and net device.
Add dpaa2_eth_free_irqs() to release and synchronize the handler before
returning its MC resource. Use it before disconnecting the MAC and freeing
the portal and net device in both paths.
Found by a static analysis tool under development.
Not tested on hardware.
Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 7227a35dfaf2..91462b88b34a 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4824,6 +4824,14 @@ static int dpaa2_eth_setup_irqs(struct fsl_mc_device *ls_dev)
return err;
}
+static void dpaa2_eth_free_irqs(struct fsl_mc_device *ls_dev)
+{
+ struct fsl_mc_device_irq *irq = ls_dev->irqs[0];
+
+ devm_free_irq(&ls_dev->dev, irq->virq, &ls_dev->dev);
+ fsl_mc_free_irqs(ls_dev);
+}
+
static void dpaa2_eth_add_ch_napi(struct dpaa2_eth_priv *priv)
{
int i;
@@ -5044,7 +5052,7 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev)
if (priv->do_link_poll)
kthread_stop(priv->poll_thread);
else
- fsl_mc_free_irqs(dpni_dev);
+ dpaa2_eth_free_irqs(dpni_dev);
err_poll_thread:
dpaa2_eth_disconnect_mac(priv);
err_connect_mac:
@@ -5104,7 +5112,7 @@ static void dpaa2_eth_remove(struct fsl_mc_device *ls_dev)
if (priv->do_link_poll)
kthread_stop(priv->poll_thread);
else
- fsl_mc_free_irqs(ls_dev);
+ dpaa2_eth_free_irqs(ls_dev);
dpaa2_eth_disconnect_mac(priv);
dpaa2_eth_free_rings(priv);
base-commit: 0edbc945eb9edd0086f25b151a79cfe4adc0dfa8
--
2.43.0
reply other threads:[~2026-11-12 6:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112065616.34209-1-mhun512@gmail.com \
--to=mhun512@gmail.com \
--cc=ae878000@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=ioana.ciornei@nxp.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=ruxandra.radulescu@nxp.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®