[PATCH 1/4] wifi: ath12k: disable and enable the CE interrupts only once

[Vladyslav Tymoshchuk <tvlad744@gmail.com>]

ath12k_pci_ce_irqs_disable() calls disable_irq_nosync() each time it is
called, and ath12k_pci_ce_irqs_enable() calls enable_irq() once, from
ath12k_pci_start().

Without WoWLAN, ath12k_core_suspend_late() disables the CE interrupts
and powers the device down, and ath12k_core_resume_early() boots the
firmware again. If the firmware crashes during that boot, before
ath12k_pci_start(), ath12k_core_reset() disables the interrupts a
second time. The start that follows the reset enables them once, they
stay masked and the HTC control response is never seen:

  ath12k_wifi7_pci 0000:01:00.0: Service connect timeout
  ath12k_wifi7_pci 0000:01:00.0: failed to connect to HTT: -110
  ath12k_wifi7_pci 0000:01:00.0: failed to start core: -110
  ath12k_wifi7_pci 0000:01:00.0: failed to reconfigure driver on crash recovery

The device is dead until a reboot.

Make ATH12K_FLAG_CE_IRQ_ENABLED guard both functions, as
ATH12K_FLAG_EXT_IRQ_ENABLED does for the ext interrupts.

Fixes: 8d5f4da8d70b ("wifi: ath12k: support suspend/resume")
Signed-off-by: Vladyslav Tymoshchuk <tvlad744@gmail.com>
---
 drivers/net/wireless/ath/ath12k/pci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/pci.c b/drivers/net/wireless/ath/ath12k/pci.c
index 4bb14a95aec9..c92821153706 100644
--- a/drivers/net/wireless/ath/ath12k/pci.c
+++ b/drivers/net/wireless/ath/ath12k/pci.c
@@ -398,7 +398,8 @@ static void ath12k_pci_ce_irqs_disable(struct ath12k_base *ab)
 {
 	int i;
 
-	clear_bit(ATH12K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags);
+	if (!test_and_clear_bit(ATH12K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags))
+		return;
 
 	for (i = 0; i < ab->hw_params->ce_count; i++) {
 		if (ath12k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
@@ -739,7 +740,8 @@ void ath12k_pci_ce_irqs_enable(struct ath12k_base *ab)
 {
 	int i;
 
-	set_bit(ATH12K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags);
+	if (test_and_set_bit(ATH12K_FLAG_CE_IRQ_ENABLED, &ab->dev_flags))
+		return;
 
 	for (i = 0; i < ab->hw_params->ce_count; i++) {
 		if (ath12k_ce_get_attr_flags(ab, i) & CE_ATTR_DIS_INTR)
-- 
2.43.0