[PATCH v1 08/11] arm64: dts: freescale: imx8-apalis: Add SPI aliases

[Francesco Dolcini <francesco@dolcini.it>]

From: Francesco Dolcini <francesco.dolcini@toradex.com>

The Apalis family pinout defines the SoM interfaces and their
numbering, SPI1 and SPI2 being the SPI buses available to the carrier
board, implemented by lpspi0 and lpspi2 on Apalis iMX8.

imx8qm.dtsi numbers lpspi0 as spi0 and lpspi2 as spi2, so SPI2 does
not match the Apalis numbering. Add spi0 and spi1 aliases in the SoM
dtsi, zero-based with SPI1 being spi0, and delete the inherited spi2,
so lpspi2 is bus 1 and carries a single alias.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
 arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index 64604f91d567..806f5a8a51c8 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -8,6 +8,9 @@
 / {
 	aliases {
 		ethernet0 = &fec1;
+		spi0 = &lpspi0;
+		spi1 = &lpspi2;
+		/delete-property/ spi2;
 	};
 
 	chosen {
-- 
2.47.3