mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rob Clark <robin.clark@oss.qualcomm.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org,
	Rob Clark <robin.clark@oss.qualcomm.com>,
	Sean Paul <sean@poorly.run>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Akhil P Oommen <akhilpo@oss.qualcomm.com>,
	Dmitry Baryshkov <lumag@kernel.org>,
	Abhinav Kumar <abhinav.kumar@linux.dev>,
	Jessica Zhang <jesszhan0024@gmail.com>,
	Marijn Suijten <marijn.suijten@somainline.org>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] drm/msm/a8xx: Fixup hw_err_irq messages
Date: Thu, 12 Nov 2026 08:07:06 -0800	[thread overview]
Message-ID: <20261112160706.387641-1-robin.clark@oss.qualcomm.com> (raw)

Handle all the pipes, and don't clobber 'status'.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
---
 drivers/gpu/drm/msm/adreno/a8xx_gpu.c | 58 ++++++++++++++++++---------
 1 file changed, 38 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a8xx_gpu.c b/drivers/gpu/drm/msm/adreno/a8xx_gpu.c
index bbf5ca4fb6fc..a1747990e10e 100644
--- a/drivers/gpu/drm/msm/adreno/a8xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a8xx_gpu.c
@@ -1048,24 +1048,37 @@ int a8xx_fault_handler(void *arg, unsigned long iova, int flags, void *data)
 
 static void a8xx_cp_hw_err_irq(struct msm_gpu *gpu)
 {
-	u32 status = gpu_read(gpu, REG_A8XX_CP_INTERRUPT_STATUS_GLOBAL);
-	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
-	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
-	u32 slice = a8xx_get_first_slice(a6xx_gpu);
-	u32 hw_fault_mask = GENMASK(6, 0);
-	u32 sw_fault_mask = GENMASK(22, 16);
+	const u32 status = gpu_read(gpu, REG_A8XX_CP_INTERRUPT_STATUS_GLOBAL);
+	const u32 slice = a8xx_get_first_slice(to_a6xx_gpu(to_adreno_gpu(gpu)));
+	const u32 hw_fault_mask = GENMASK(6, 0);
+	const u32 sw_fault_mask = GENMASK(22, 16);
 	u32 pipe = 0;
 
 	dev_err_ratelimited(&gpu->pdev->dev, "CP Fault Global INT status: 0x%x\n", status);
 
-	if (status & (A8XX_CP_GLOBAL_INT_MASK_HWFAULTBR |
-		      A8XX_CP_GLOBAL_INT_MASK_SWFAULTBR))
+#define FAULT_MASK(_pipe) (A8XX_CP_GLOBAL_INT_MASK_HWFAULT ## _pipe | A8XX_CP_GLOBAL_INT_MASK_SWFAULT ## _pipe)
+	if (status & FAULT_MASK(BR))
 		pipe |= BIT(PIPE_BR);
 
-	if (status & (A8XX_CP_GLOBAL_INT_MASK_HWFAULTBV |
-		      A8XX_CP_GLOBAL_INT_MASK_SWFAULTBV))
+	if (status & FAULT_MASK(BV))
 		pipe |= BIT(PIPE_BV);
 
+	if (status & FAULT_MASK(LPAC))
+		pipe |= BIT(PIPE_LPAC);
+
+	if (status & FAULT_MASK(AQE0))
+		pipe |= BIT(PIPE_AQE0);
+
+	if (status & FAULT_MASK(AQE1))
+		pipe |= BIT(PIPE_AQE1);
+
+	if (status & FAULT_MASK(DDEBR))
+		pipe |= BIT(PIPE_DDE_BR);
+
+	if (status & FAULT_MASK(DDEBV))
+		pipe |= BIT(PIPE_DDE_BV);
+#undef FAULT_MASK
+
 	if (!pipe) {
 		dev_err_ratelimited(&gpu->pdev->dev, "CP Fault Unknown pipe\n");
 		goto out;
@@ -1076,31 +1089,36 @@ static void a8xx_cp_hw_err_irq(struct msm_gpu *gpu)
 			continue;
 
 		if (hw_fault_mask & status) {
-			status = a8xx_read_pipe_slice(gpu, pipe_id, slice,
+			u32 hw_status = a8xx_read_pipe_slice(gpu, pipe_id, slice,
 					REG_A8XX_CP_HW_FAULT_STATUS_PIPE);
 			dev_err_ratelimited(&gpu->pdev->dev,
-					"CP HW FAULT pipe: %u status: 0x%x\n", pipe_id, status);
+					"CP HW FAULT pipe: %u status: 0x%x\n", pipe_id, hw_status);
 		}
 
 		if (sw_fault_mask & status) {
-			status = a8xx_read_pipe_slice(gpu, pipe_id, slice,
+			u32 sw_status = a8xx_read_pipe_slice(gpu, pipe_id, slice,
 					REG_A8XX_CP_INTERRUPT_STATUS_PIPE);
 			dev_err_ratelimited(&gpu->pdev->dev,
-					"CP SW FAULT pipe: %u status: 0x%x\n", pipe_id, status);
+					"CP SW FAULT pipe: %u status: 0x%x\n", pipe_id, sw_status);
 
-			if (status & BIT(8)) {
+			if (sw_status & A8XX_CP_INTERRUPT_STATUS_MASK_PIPE_OPCODEERROR) {
 				a8xx_write_pipe(gpu, pipe_id, REG_A8XX_CP_SQE_STAT_ADDR_PIPE, 1);
-				status = a8xx_read_pipe_slice(gpu, pipe_id, slice,
+				u32 opcode = a8xx_read_pipe_slice(gpu, pipe_id, slice,
 						REG_A8XX_CP_SQE_STAT_DATA_PIPE);
 				dev_err_ratelimited(&gpu->pdev->dev,
-						"CP Opcode error, opcode=0x%x\n", status);
+						"CP Opcode error, opcode=0x%x\n", opcode);
 			}
 
-			if (status & BIT(10)) {
-				status = a8xx_read_pipe_slice(gpu, pipe_id, slice,
+			if (sw_status & A8XX_CP_INTERRUPT_STATUS_MASK_PIPE_REGISTERPROTECTIONERROR) {
+				u32 prot = a8xx_read_pipe_slice(gpu, pipe_id, slice,
 						REG_A8XX_CP_PROTECT_STATUS_PIPE);
+				u32 addr = FIELD(prot, A8XX_CP_PROTECT_STATUS_PIPE_ADDR);
+				const char *mode = (prot & A8XX_CP_PROTECT_STATUS_PIPE_READ) ?
+					"read" : "write";
+
 				dev_err_ratelimited(&gpu->pdev->dev,
-						"CP REG PROTECT error, status=0x%x\n", status);
+						"CP REG PROTECT error, %s addr=0x%05x, status=0x%x\n",
+						mode, addr, prot);
 			}
 		}
 	}
-- 
2.56.0


                 reply	other threads:[~2026-11-12 16:07 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261112160706.387641-1-robin.clark@oss.qualcomm.com \
    --to=robin.clark@oss.qualcomm.com \
    --cc=abhinav.kumar@linux.dev \
    --cc=airlied@gmail.com \
    --cc=akhilpo@oss.qualcomm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jesszhan0024@gmail.com \
    --cc=konradybcio@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lumag@kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=sean@poorly.run \
    --cc=simona@ffwll.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®