[PATCH v4 5/7] serial: sh-sci: Skip TDxE clear when hardware clears it automatically

[Diogo Ivo <diogo.ivo.sx@renesas.com>]

From: Au Dang <au.dang.jx@renesas.com>

On some SCI variants, the TDxE (Transmit Data Empty) flag in SCxSR is
cleared by hardware when data is written to TDR. Clearing it again from
software via clear_SCxSR() generates a spurious TXI interrupt, causing
the last character to be transmitted twice.

Add a tdxe_auto_clear flag to struct sci_of_data, propagate it to struct
sci_port as has_tdxe_auto_clear, and skip the clear_SCxSR() call in
sci_transmit_chars() and sci_poll_put_char() when it is set. Enable the
flag for the PORT_SCI (of_sci_sci) variant.

Signed-off-by: Au Dang <au.dang.jx@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Diogo Ivo <diogo.ivo.sx@renesas.com>
---
 drivers/tty/serial/sh-sci-common.h | 2 ++
 drivers/tty/serial/sh-sci.c        | 9 +++++++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sh-sci-common.h b/drivers/tty/serial/sh-sci-common.h
index 273856fbc20b..b75e5e1d3075 100644
--- a/drivers/tty/serial/sh-sci-common.h
+++ b/drivers/tty/serial/sh-sci-common.h
@@ -108,6 +108,7 @@ struct sci_of_data {
 	const struct sci_port_ops *ops;
 	unsigned short regtype;
 	unsigned short type;
+	bool tdxe_auto_clear;
 };
 
 struct sci_port {
@@ -163,6 +164,7 @@ struct sci_port {
 	bool has_rtscts;
 	bool autorts;
 	bool tx_occurred;
+	bool has_tdxe_auto_clear;
 };
 
 #define to_sci_port(uart) container_of((uart), struct sci_port, port)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 39aa90131918..fc77536644ed 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -913,7 +913,8 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
 	} while (!(status & SCxSR_TDxE(port)));
 
 	sci_serial_out(port, SCxTDR, c);
-	s->ops->clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+	if (!s->has_tdxe_auto_clear)
+		s->ops->clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
 }
 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE ||
 	  CONFIG_SERIAL_SH_SCI_EARLYCON */
@@ -1063,7 +1064,8 @@ static void sci_transmit_chars(struct uart_port *port)
 		port->icount.tx++;
 	} while (--count > 0);
 
-	s->ops->clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
+	if (!s->has_tdxe_auto_clear)
+		s->ops->clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
 
 	if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
@@ -3664,6 +3666,7 @@ static const struct sci_of_data of_sci_sci = {
 	.ops = &sci_port_ops,
 	.uart_ops = &sci_uart_ops,
 	.params = &sci_port_params[SCIx_SCI_REGTYPE],
+	.tdxe_auto_clear = true,
 };
 
 static const struct of_device_id of_sci_match[] __maybe_unused = {
@@ -3802,6 +3805,7 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev,
 	sp->ops = data->ops;
 	sp->port.ops = data->uart_ops;
 	sp->params = data->params;
+	sp->has_tdxe_auto_clear = data->tdxe_auto_clear;
 
 	sp->has_rtscts = of_property_read_bool(np, "uart-has-rtscts");
 
@@ -4088,6 +4092,7 @@ int __init scix_early_console_setup(struct earlycon_device *device,
 	sci_ports[0].params = data->params;
 	sci_ports[0].ops = data->ops;
 	sci_ports[0].port.ops = data->uart_ops;
+	sci_ports[0].has_tdxe_auto_clear = data->tdxe_auto_clear;
 	sci_uart_earlycon = true;
 	regs = sci_ports[0].params->common_regs;
 

-- 
2.56.0