[PATCH v4 0/3] dt-bindings: bus: omap-l3: Convert to DT schema

[Bhargav Joshi <j.bhargav.u@gmail.com>]

This series converts the TI OMAP L3 binding from text to DT schema.

The text binding grouped OMAP3 (SMX IP) and OMAP4+ (Arteris NoC IP)
together. split into two schemas because OMAP3 (SMX) and OMAP4+ (Arteris
NoC) are different hardware IPs.

- patch 1 adds a missing unit address to the ABB regulator node in the
  OMAP36xx devicetree to fix a validation warning. 
- patch 2 converts OMAP3 L3 SMX interconnect.
- patch 3 converts the OMAP4+ L3 NoC interconnect.

Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
---
Changes in v4:
- Fix SMX example node.
- Link to v3: https://lore.kernel.org/r/20261112-ti-l3-noc-v3-0-7281b1af8030@gmail.com

Changes in v3:
- Split bidning into two SMX and NOC variants.
- Fix reg maxItems to 2 for ti,dra7-l3-noc L3_MAIN_2 is a submodule of
  L3_MAIN_1.
- Link to v2: https://lore.kernel.org/r/20261109-ti-l3-noc-v2-0-509e8485a1f3@gmail.com

Changes in v2:
- Move binding to bindings/bus/
- Rebase to latest mainline rc
- Add unit address to regulator-abb-mpu node
- Link to v1: https://lore.kernel.org/r/20261003-ti-l3-noc-v1-1-9bd18cac33e9@gmail.com

---
Bhargav Joshi (3):
      ARM: dts: omap36xx: Add unit address to ABB regulator node
      dt-bindings: bus: ti,omap3-l3-smx: Convert to DT schema
      dt-bindings: bus: ti,omap-l3-noc: Convert to DT schema

 .../devicetree/bindings/arm/omap/l3-noc.txt        | 23 -------
 .../devicetree/bindings/bus/ti,omap-l3-noc.yaml    | 71 ++++++++++++++++++++++
 .../devicetree/bindings/bus/ti,omap3-l3-smx.yaml   | 68 +++++++++++++++++++++
 arch/arm/boot/dts/ti/omap/omap36xx.dtsi            |  2 +-
 4 files changed, 140 insertions(+), 24 deletions(-)
---
base-commit: fa4ad798f6f681031775266044ba1b0cf3c670bd
change-id: 20261002-ti-l3-noc-28dfca81fdc5

Best regards,
--  
Bhargav