From: Raghav Sharma <raghav.s@samsung.com>
To: krzk@kernel.org, s.nawrocki@samsung.com, cw00.choi@samsung.com,
peter.griffin@linaro.org, alim.akhtar@samsung.com,
sboyd@kernel.org, bmasney+clk@redhat.com,
jbrunet+clk@baylibre.com, robh@kernel.org, conor+dt@kernel.org,
raghav.s@samsung.com
Cc: linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, is.gandhi@samsung.com,
ts.amit@samsung.com, pokala.reddy@samsung.com
Subject: [PATCH v3 11/14 RESEND] arm64: dts: exynos8855: add cmu_top & cmu_peric clock DT nodes
Date: Fri, 13 Nov 2026 16:36:09 +0530 [thread overview]
Message-ID: <20261113110612.3265841-12-raghav.s@samsung.com> (raw)
In-Reply-To: <20261113110612.3265841-1-raghav.s@samsung.com>
Add required dt node for cmu_top & cmu_peric block.
This also add sysreg_peric node. sysreg_peric contains
DRCG and MEMCLK SFRs bits which are used in clock driver.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
---
arch/arm64/boot/dts/exynos/exynos8855.dtsi | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos8855.dtsi b/arch/arm64/boot/dts/exynos/exynos8855.dtsi
index 0333b80eba84..2e5dc79d66bc 100644
--- a/arch/arm64/boot/dts/exynos/exynos8855.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8855.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/samsung,exynos8855.h>
/ {
compatible = "samsung,exynos8855";
@@ -170,12 +171,43 @@ pinctrl_cmgp: pinctrl@12030000 {
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmu_top: clock-controller@13900000 {
+ compatible = "samsung,exynos8855-cmu-top";
+ reg = <0x13900000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&oscclk>;
+ clock-names = "oscclk";
+ };
+
pinctrl_usi: pinctrl@15030000 {
compatible = "samsung,exynos8855-pinctrl";
reg = <0x15030000 0x1000>;
interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
};
+ cmu_peric: clock-controller@15400000 {
+ compatible = "samsung,exynos8855-cmu-peric";
+ reg = <0x15400000 0x10000>;
+ #clock-cells = <1>;
+
+ clocks = <&oscclk>,
+ <&cmu_top CLKCMU_DOUT_PERIC_NOC>,
+ <&cmu_top CLKCMU_DOUT_PERIC_MMC_CARD>,
+ <&cmu_top CLKCMU_DOUT_PERIC_IP>;
+ clock-names = "oscclk",
+ "bus",
+ "mmc_card",
+ "ip";
+ samsung,sysreg = <&sysreg_peric>;
+ };
+
+ sysreg_peric: syscon@15420000 {
+ compatible = "samsung,exynos8855-peric-sysreg",
+ "syscon";
+ reg = <0x15420000 0x10000>;
+ clocks = <&cmu_peric CLK_GOUT_SYSREG_PERIC>;
+ };
+
pinctrl_peric: pinctrl@15440000 {
compatible = "samsung,exynos8855-pinctrl";
reg = <0x15440000 0x1000>;
--
2.34.1
next prev parent reply other threads:[~2026-11-13 10:54 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20261113104829epcas5p13695795bc337b89816b05eec610a0dba@epcas5p1.samsung.com>
2026-11-13 11:05 ` [PATCH v3 00/14 RESEND] Add clock support for Exynos8855 SoC Raghav Sharma
[not found] ` <CGME20261113104832epcas5p4e1e9a3dedeb0c9c60cb80c23eb5d930d@epcas5p4.samsung.com>
2026-11-13 11:05 ` [PATCH v3 01/14 RESEND] dt-bindings: soc: samsung: Exynos8855 SYSREG compatibles Raghav Sharma
2026-11-13 10:57 ` Peter Griffin
[not found] ` <CGME20261113104835epcas5p4771d9933265138321769ebe010ee7334@epcas5p4.samsung.com>
2026-11-13 11:06 ` [PATCH v3 02/14 RESEND] dt-bindings: clock: exynos8855: add top & peric clock definitions Raghav Sharma
2026-11-13 11:01 ` Peter Griffin
[not found] ` <CGME20261113104838epcas5p2623c7a05b6163954e13e98367063e7d4@epcas5p2.samsung.com>
2026-11-13 11:06 ` [PATCH v3 03/14 RESEND] dt-bindings: clock: exynos8855: add peris " Raghav Sharma
2026-11-13 11:25 ` Peter Griffin
[not found] ` <CGME20261113104841epcas5p2823126ce22f44cc98fcbdf94403c32e3@epcas5p2.samsung.com>
2026-11-13 11:06 ` [PATCH v3 04/14 RESEND] dt-bindings: clock: exynos8855: add hsi " Raghav Sharma
2026-11-13 11:02 ` Peter Griffin
[not found] ` <CGME20261113104844epcas5p4c1cb0c31de8b5b445f7f0060f81cf753@epcas5p4.samsung.com>
2026-11-13 11:06 ` [PATCH v3 05/14 RESEND] dt-bindings: clock: exynos8855: add usb " Raghav Sharma
2026-11-13 11:03 ` Peter Griffin
[not found] ` <CGME20261113104847epcas5p1d970255218f1ca78b19690bfd097f303@epcas5p1.samsung.com>
2026-11-13 11:06 ` [PATCH v3 06/14 RESEND] clk: samsung: clk-pll: Add support for pll_4313 Raghav Sharma
[not found] ` <CGME20261113104850epcas5p4ef9292af100475b1f12a2601bf5e1a84@epcas5p4.samsung.com>
2026-11-13 11:06 ` [PATCH v3 07/14 RESEND] clk: samsung: exynos8855: add block top and peric clock support Raghav Sharma
2026-11-13 12:06 ` Peter Griffin
[not found] ` <CGME20261113104853epcas5p175c566a1ced2547e533c21b21e60e993@epcas5p1.samsung.com>
2026-11-13 11:06 ` [PATCH v3 08/14 RESEND] clk: samsung: exynos8855: add block peris " Raghav Sharma
[not found] ` <CGME20261113104855epcas5p1ed56e1444542349a8f2839cf27df3d60@epcas5p1.samsung.com>
2026-11-13 11:06 ` [PATCH v3 09/14 RESEND] clk: samsung: exynos8855: add block hsi " Raghav Sharma
[not found] ` <CGME20261113104858epcas5p47fb0f4e46302dfe01070f4cd298870ca@epcas5p4.samsung.com>
2026-11-13 11:06 ` [PATCH v3 10/14 RESEND] clk: samsung: exynos8855: add block usb " Raghav Sharma
[not found] ` <CGME20261113104901epcas5p26c1b8e9a324f133216b7980ac7ded44a@epcas5p2.samsung.com>
2026-11-13 11:06 ` Raghav Sharma [this message]
[not found] ` <CGME20261113104904epcas5p1546fd543fad42a61f1a70d4fd55ac833@epcas5p1.samsung.com>
2026-11-13 11:06 ` [PATCH v3 12/14 RESEND] arm64: dts: exynos8855: add cmu_peris clock DT nodes Raghav Sharma
[not found] ` <CGME20261113104906epcas5p462308ef9eec80f8b7a5f81b64e72b24d@epcas5p4.samsung.com>
2026-11-13 11:06 ` [PATCH v3 13/14 RESEND] arm64: dts: exynos8855: add cmu_hsi " Raghav Sharma
[not found] ` <CGME20261113104909epcas5p1d1b81b4e800e8a1d1cf830f21e52499a@epcas5p1.samsung.com>
2026-11-13 11:06 ` [PATCH v3 14/14 RESEND] arm64: dts: exynos8855: add cmu_usb " Raghav Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261113110612.3265841-12-raghav.s@samsung.com \
--to=raghav.s@samsung.com \
--cc=alim.akhtar@samsung.com \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=is.gandhi@samsung.com \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=peter.griffin@linaro.org \
--cc=pokala.reddy@samsung.com \
--cc=robh@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
--cc=ts.amit@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®