mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Birger Koblitz <mail@birger-koblitz.de>
To: Andrew Lunn <andrew+netdev@lunn.ch>,
	 "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	 Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	 Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	 Huacai Chen <chenhuacai@kernel.org>,
	WANG Xuerui <kernel@xen0n.name>,
	 Eric Dumazet <edumazet@kernel.org>,
	Eric Dumazet <edumazet@kernel.org>
Cc: linux-usb@vger.kernel.org, netdev@vger.kernel.org,
	 linux-kernel@vger.kernel.org, loongarch@lists.linux.dev,
	 Jianhui Xu <neuromoments@gmail.com>,
	 Emir Beganovic <beganovic.emir@gmail.com>,
	 Birger Koblitz <mail@birger-koblitz.de>
Subject: [PATCH net-next v21 08/13] ax88179_178a: Add AX179A/AX279 multicast configuration
Date: Sat, 14 Nov 2026 11:51:04 +0100	[thread overview]
Message-ID: <20261114-ax88179a-v21-8-c2d34410bcbe@birger-koblitz.de> (raw)
In-Reply-To: <20261114-ax88179a-v21-0-c2d34410bcbe@birger-koblitz.de>

Add support for conditionally setting the ip_alignement flag
AX_RX_CTL_IPE in AX_RX_CTL and make sure that AX_RX_CTL_DROPCRCERR
is also set to be consistent with the initial configuration in
ax88179_reset()

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/usb/ax88179_lib.c      | 16 +++++++++++-----
 drivers/net/usb/ax88179a_devices.c |  1 +
 2 files changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/ax88179_lib.c b/drivers/net/usb/ax88179_lib.c
index fa6423f51849e2ea5b640dcb82af6282d41b189e..f27b073e1bccb72a49437cb082a80c8e73a5de46 100644
--- a/drivers/net/usb/ax88179_lib.c
+++ b/drivers/net/usb/ax88179_lib.c
@@ -319,16 +319,21 @@ int ax88179_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom, u8
 void ax88179_set_multicast(struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
-	struct ax88179_data *data = dev->driver_priv;
 	u8 *m_filter = ((u8 *)dev->data);
+	struct ax88179_data *data;
+	u16 rxctl = 0;
+
+	data = dev->driver_priv;
 
-	data->rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_IPE);
+	rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_DROPCRCERR);
+	if (data->ip_align)
+		rxctl |= AX_RX_CTL_IPE;
 
 	if (net->flags & IFF_PROMISC) {
-		data->rxctl |= AX_RX_CTL_PRO;
+		rxctl |= AX_RX_CTL_PRO;
 	} else if (net->flags & IFF_ALLMULTI ||
 		   netdev_mc_count(net) > AX_MAX_MCAST) {
-		data->rxctl |= AX_RX_CTL_AMALL;
+		rxctl |= AX_RX_CTL_AMALL;
 	} else if (netdev_mc_empty(net)) {
 		/* just broadcast and directed */
 	} else {
@@ -349,9 +354,10 @@ void ax88179_set_multicast(struct net_device *net)
 					AX_MCAST_FLTSIZE, AX_MCAST_FLTSIZE,
 					m_filter);
 
-		data->rxctl |= AX_RX_CTL_AM;
+		rxctl |= AX_RX_CTL_AM;
 	}
 
+	WRITE_ONCE(data->rxctl, rxctl);
 	ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_RX_CTL,
 				2, 2, &data->rxctl);
 }
diff --git a/drivers/net/usb/ax88179a_devices.c b/drivers/net/usb/ax88179a_devices.c
index 4207d2cc2b865e5780b3c7f5ba2645a6242df477..a6b0a3f47118c46db38d483792c083510aa2641a 100644
--- a/drivers/net/usb/ax88179a_devices.c
+++ b/drivers/net/usb/ax88179a_devices.c
@@ -678,6 +678,7 @@ static const struct net_device_ops ax88179a_netdev_ops = {
 	.ndo_set_mac_address	= ax88179_set_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_eth_ioctl		= ax88179a_mii_ioctl,
+	.ndo_set_rx_mode	= ax88179_set_multicast,
 	.ndo_set_features	= ax88179a_set_features,
 	.ndo_vlan_rx_add_vid	= ax88179a_vlan_rx_add_vid,
 	.ndo_vlan_rx_kill_vid	= ax88179a_vlan_rx_kill_vid,

-- 
2.47.3


  parent reply	other threads:[~2026-11-14 10:51 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-14 10:50 [PATCH net-next v21 00/13] ax88179_178a: Add support for AX88179A-based chips Birger Koblitz
2026-11-14 10:50 ` [PATCH net-next v21 01/13] phylink: Add phylink_mac_interrupt Birger Koblitz
2026-11-16  2:06   ` netdev-bot+sashiko
2026-11-14 10:50 ` [PATCH net-next v21 02/13] phylib: Add support for PHYs with broken forced mode Birger Koblitz
2026-11-16  2:06   ` netdev-bot+sashiko
2026-11-14 10:50 ` [PATCH net-next v21 03/13] ax88179_178a: Split driver into library and device specific code Birger Koblitz
2026-11-16  2:06   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 04/13] ax88179_178a: Add HW support for AX179A-based chips Birger Koblitz
2026-11-16  2:06   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 05/13] ax88179_178a: Add EEE configuration support for AX88179A MACs Birger Koblitz
2026-11-14 10:51 ` [PATCH net-next v21 06/13] ax88179_178a: Add EEE configuration support for AX88179A PHYs Birger Koblitz
2026-11-16  2:06   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 07/13] ax88179_178a: Add VLAN offload support for AX88179A Birger Koblitz
2026-11-16  2:07   ` netdev-bot+sashiko
2026-11-14 10:51 ` Birger Koblitz [this message]
2026-11-16  2:07   ` [PATCH net-next v21 08/13] ax88179_178a: Add AX179A/AX279 multicast configuration netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 09/13] ax88179_178a: Add Suspend/resume support for AX88179A/772D/279 Birger Koblitz
2026-11-16  2:07   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 10/13] ax88179_178a: Add ethtool get_drvinfo Birger Koblitz
2026-11-16  2:07   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 11/13] ax88179_178a: Update driver name and information Birger Koblitz
2026-11-16  2:07   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 12/13] ax88179_178a: Add support for AX88179A/772D/279 EEPROM access Birger Koblitz
2026-11-16  2:07   ` netdev-bot+sashiko
2026-11-14 10:51 ` [PATCH net-next v21 13/13] ax88796b: Add support for AX88772D, AX88179A and AX88279 Birger Koblitz
2026-11-16  2:07   ` netdev-bot+sashiko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261114-ax88179a-v21-8-c2d34410bcbe@birger-koblitz.de \
    --to=mail@birger-koblitz.de \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=beganovic.emir@gmail.com \
    --cc=chenhuacai@kernel.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@kernel.org \
    --cc=hkallweit1@gmail.com \
    --cc=kernel@xen0n.name \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=loongarch@lists.linux.dev \
    --cc=netdev@vger.kernel.org \
    --cc=neuromoments@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®