From: Han Gao via B4 Relay <devnull+gaohan.iscas.ac.cn@kernel.org>
To: Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Guo Ren <guoren@kernel.org>,
Thomas Gleixner <tglx@kernel.org>, Radu Rendec <radu@rendec.net>,
Samuel Holland <samuel.holland@sifive.com>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Anup Patel <anup@brainfault.org>, Han Gao <gaohan@iscas.ac.cn>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Chen-Yu Tsai <wens@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Maxime Ripard <mripard@kernel.org>,
Linus Walleij <linusw@kernel.org>,
Andre Przywara <andre.przywara@arm.com>
Cc: Han Gao <rabenda.cn@gmail.com>,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@sifive.com>,
Conor Dooley <conor@kernel.org>,
devicetree@vger.kernel.org, linux-csky@vger.kernel.org,
linux-sunxi@lists.linux.dev, linux-clk@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-rtc@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: [PATCH 07/19] clk: sunxi-ng: add support for the Allwinner V861 PRCM CCU
Date: Sat, 14 Nov 2026 06:33:33 +0800 [thread overview]
Message-ID: <20261114-v861-v1-7-eb71ec3ee523@iscas.ac.cn> (raw)
In-Reply-To: <20261114-v861-v1-0-eb71ec3ee523@iscas.ac.cn>
From: Han Gao <gaohan@iscas.ac.cn>
Add the PRCM CCU driver for the V861. It provides the R-AHB and R-APB0
bus clocks and the PPU and RTC gates and resets.
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
---
drivers/clk/sunxi-ng/Kconfig | 10 +++
drivers/clk/sunxi-ng/Makefile | 2 +
drivers/clk/sunxi-ng/ccu-sun252i-v861-r.c | 110 ++++++++++++++++++++++++++++++
3 files changed, 122 insertions(+)
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 890a0cbb45b6..0c591b24f085 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -32,6 +32,16 @@ config SUN252I_V861_CCU
reset lines of most peripherals, so it is required on boards
based on this SoC.
+config SUN252I_V861_R_CCU
+ tristate "Support for the Allwinner V861 PRCM CCU"
+ default ARCH_SUNXI
+ depends on RISCV || COMPILE_TEST
+ help
+ Support for the PRCM clock control unit of the Allwinner V861
+ SoC. It provides the bus clocks and reset lines of the always-on
+ blocks, such as the RTC and the power management unit, so it is
+ required on boards based on this SoC.
+
config SUN50I_A64_CCU
tristate "Support for the Allwinner A64 CCU"
default ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 01869330dc4e..851c5ae6dc21 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_SUNIV_F1C100S_CCU) += suniv-f1c100s-ccu.o
obj-$(CONFIG_SUN20I_D1_CCU) += sun20i-d1-ccu.o
obj-$(CONFIG_SUN20I_D1_R_CCU) += sun20i-d1-r-ccu.o
obj-$(CONFIG_SUN252I_V861_CCU) += sun252i-v861-ccu.o
+obj-$(CONFIG_SUN252I_V861_R_CCU) += sun252i-v861-r-ccu.o
obj-$(CONFIG_SUN50I_A64_CCU) += sun50i-a64-ccu.o
obj-$(CONFIG_SUN50I_A100_CCU) += sun50i-a100-ccu.o
obj-$(CONFIG_SUN50I_A100_R_CCU) += sun50i-a100-r-ccu.o
@@ -57,6 +58,7 @@ suniv-f1c100s-ccu-y += ccu-suniv-f1c100s.o
sun20i-d1-ccu-y += ccu-sun20i-d1.o
sun20i-d1-r-ccu-y += ccu-sun20i-d1-r.o
sun252i-v861-ccu-y += ccu-sun252i-v861.o
+sun252i-v861-r-ccu-y += ccu-sun252i-v861-r.o
sun50i-a64-ccu-y += ccu-sun50i-a64.o
sun50i-a100-ccu-y += ccu-sun50i-a100.o
sun50i-a100-r-ccu-y += ccu-sun50i-a100-r.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun252i-v861-r.c b/drivers/clk/sunxi-ng/ccu-sun252i-v861-r.c
new file mode 100644
index 000000000000..9c8de9643722
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun252i-v861-r.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2026 Han Gao <gaohan@iscas.ac.cn>
+ *
+ * Based on the A523 PRCM CCU driver:
+ * Copyright (C) 2024 Arm Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/sun252i-v861-r-ccu.h>
+#include <dt-bindings/reset/sun252i-v861-r-ccu.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+
+static const struct clk_parent_data r_ahb_apb_parents[] = {
+ { .fw_name = "hosc" },
+ { .fw_name = "losc" },
+ { .fw_name = "iosc" },
+ { .fw_name = "pll-periph" },
+};
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(r_ahb_clk, "r-ahb", r_ahb_apb_parents, 0x000,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ 0);
+static const struct clk_hw *r_ahb_hws[] = { &r_ahb_clk.common.hw };
+
+static SUNXI_CCU_MP_DATA_WITH_MUX(r_apb0_clk, "r-apb0", r_ahb_apb_parents,
+ 0x00c,
+ 0, 5, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ 0);
+static const struct clk_hw *r_apb0_hws[] = { &r_apb0_clk.common.hw };
+
+static SUNXI_CCU_GATE_HWS(bus_r_ppu_clk, "bus-r-ppu", r_apb0_hws, 0x1ac,
+ BIT(0), 0);
+static SUNXI_CCU_GATE_HWS(bus_r_rtc_clk, "bus-r-rtc", r_ahb_hws, 0x20c,
+ BIT(0), 0);
+
+static struct ccu_common *sun252i_v861_r_ccu_clks[] = {
+ &r_ahb_clk.common,
+ &r_apb0_clk.common,
+ &bus_r_ppu_clk.common,
+ &bus_r_rtc_clk.common,
+};
+
+static struct clk_hw_onecell_data sun252i_v861_r_hw_clks = {
+ .num = CLK_BUS_R_RTC + 1,
+ .hws = {
+ [CLK_R_AHB] = &r_ahb_clk.common.hw,
+ [CLK_R_APB0] = &r_apb0_clk.common.hw,
+ [CLK_BUS_R_PPU] = &bus_r_ppu_clk.common.hw,
+ [CLK_BUS_R_RTC] = &bus_r_rtc_clk.common.hw,
+ },
+};
+
+static const struct ccu_reset_map sun252i_v861_r_ccu_resets[] = {
+ [RST_BUS_R_PPU] = { 0x1ac, BIT(16) },
+ [RST_BUS_R_RTC] = { 0x20c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun252i_v861_r_ccu_desc = {
+ .ccu_clks = sun252i_v861_r_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun252i_v861_r_ccu_clks),
+
+ .hw_clks = &sun252i_v861_r_hw_clks,
+
+ .resets = sun252i_v861_r_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun252i_v861_r_ccu_resets),
+};
+
+static int sun252i_v861_r_ccu_probe(struct platform_device *pdev)
+{
+ void __iomem *reg;
+
+ reg = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ return devm_sunxi_ccu_probe(&pdev->dev, reg, &sun252i_v861_r_ccu_desc);
+}
+
+static const struct of_device_id sun252i_v861_r_ccu_ids[] = {
+ { .compatible = "allwinner,sun252i-v861-r-ccu" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sun252i_v861_r_ccu_ids);
+
+static struct platform_driver sun252i_v861_r_ccu_driver = {
+ .probe = sun252i_v861_r_ccu_probe,
+ .driver = {
+ .name = "sun252i-v861-r-ccu",
+ .suppress_bind_attrs = true,
+ .of_match_table = sun252i_v861_r_ccu_ids,
+ },
+};
+module_platform_driver(sun252i_v861_r_ccu_driver);
+
+MODULE_IMPORT_NS("SUNXI_CCU");
+MODULE_DESCRIPTION("Support for the Allwinner V861 PRCM CCU");
+MODULE_LICENSE("GPL");
--
2.55.0
next prev parent reply other threads:[~2026-11-13 22:33 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 22:33 [PATCH 00/19] riscv: add initial support for the Allwinner V861 and Avaota F2 Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 01/19] riscv: sunxi: describe the wider Allwinner SoC family Han Gao via B4 Relay
2026-11-14 13:13 ` Guo Ren
2026-11-13 22:33 ` [PATCH 02/19] dt-bindings: riscv: cpus: add the XuanTie C907 Han Gao via B4 Relay
2026-11-14 12:56 ` Guo Ren
2026-11-13 22:33 ` [PATCH 03/19] dt-bindings: interrupt-controller: add the Allwinner V861 PLIC Han Gao via B4 Relay
2026-11-14 13:07 ` Guo Ren
2026-11-14 13:29 ` Guo Ren
2026-11-13 22:33 ` [PATCH 04/19] dt-bindings: timer: add the Allwinner V861 CLINT Han Gao via B4 Relay
2026-11-14 13:08 ` Guo Ren
2026-11-14 13:30 ` Guo Ren
2026-11-13 22:33 ` [PATCH 05/19] dt-bindings: clock: sunxi-ng: document the Allwinner V861 CCUs Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 06/19] clk: sunxi-ng: add support for the Allwinner V861 CCU Han Gao via B4 Relay
2026-11-15 7:31 ` Jernej Škrabec
2026-11-13 22:33 ` Han Gao via B4 Relay [this message]
2026-11-13 22:33 ` [PATCH 08/19] dt-bindings: rtc: sun6i: add the Allwinner V861 RTC Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 09/19] clk: sunxi-ng: sun6i-rtc: allow variants without a 32k fanout mux Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 10/19] clk: sunxi-ng: sun6i-rtc: allow another 24 MHz to 32k divider ratio Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 11/19] clk: sunxi-ng: sun6i-rtc: add Allwinner V861 support Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 12/19] dt-bindings: pinctrl: add the Allwinner V861 pin controllers Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 13/19] pinctrl: sunxi: allow a per-controller IRQ register base Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 14/19] pinctrl: sunxi: add support for the Allwinner V861 PIO Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 15/19] pinctrl: sunxi: add support for the Allwinner V861 R-PIO Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 16/19] riscv: dts: allwinner: add the Allwinner V861 SoC Han Gao via B4 Relay
2026-11-14 13:23 ` Guo Ren
2026-11-13 22:33 ` [PATCH 17/19] dt-bindings: riscv: sunxi: add the YuzukiHD Avaota F2 Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 18/19] riscv: dts: allwinner: add the YuzukiHD Avaota F2 board Han Gao via B4 Relay
2026-11-13 22:33 ` [PATCH 19/19] MAINTAINERS: add an entry for the Allwinner V861 SoC Han Gao via B4 Relay
2026-11-14 13:15 ` Guo Ren
2026-11-15 5:11 ` Icenowy Zheng
2026-11-15 7:32 ` Jernej Škrabec
2026-11-15 7:39 ` Icenowy Zheng
2026-11-15 7:46 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261114-v861-v1-7-eb71ec3ee523@iscas.ac.cn \
--to=devnull+gaohan.iscas.ac.cn@kernel.org \
--cc=alex@ghiti.fr \
--cc=alexandre.belloni@bootlin.com \
--cc=andre.przywara@arm.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gaohan@iscas.ac.cn \
--cc=guoren@kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-csky@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mripard@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=palmer@sifive.com \
--cc=paul.walmsley@sifive.com \
--cc=pjw@kernel.org \
--cc=rabenda.cn@gmail.com \
--cc=radu@rendec.net \
--cc=robh@kernel.org \
--cc=samuel.holland@sifive.com \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=tglx@kernel.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®