[GIT PULL] hwmon fixes for v7.4-rc3

[Guenter Roeck <linux@roeck-us.net>]

Hi Linus,

Please pull hwmon fixes for Linux v7.4-rc3 from signed tag:

    git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-for-v7.4-rc3

Thanks,
Guenter
------

The following changes since commit 7475ea8b58616b33c04afb976cf0fbaad9dd63fb:

  Linux 7.4-rc2 (2026-11-08 16:22:20 -0800)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git tags/hwmon-for-v7.4-rc3

for you to fetch changes up to b5c5b67e02406fb48acf57cf2c30a570230fd6aa:

  hwmon: (aht10) Fix update_interval overflow on 64-bit (2026-11-13 12:08:12 -0800)

----------------------------------------------------------------
hwmon fixes for v7.4-rc3

* Read tracking-mode voltage fault limits dynamically in the mp2975
  PMBus driver instead of caching probe-time snapshots, avoiding false
  over-voltage alarms when CPU voltage changes at runtime.

* Fix SCMI sensor probe by enabling supported sensors via firmware IDs
  before exposing channels and checking channel config allocations.

* Fix runtime PM enable and reference count imbalances during probe and
  teardown in the gpio-fan driver.

* Fix max31760 fan controller initialization and reporting, including
  leaving standby at probe, initial 0 RPM reporting, and swapped
  temperature limit registers.

* Assorted minor sensor reading, interval clamping, and register
  handling fixes in other drivers.

----------------------------------------------------------------
Anton Lundin (1):
      hwmon: (nct6775) Handle dual use registers

Felix Radensky (1):
      hwmon: (pmbus/mp2975) Get vout fault limits dynamically

Guenter Roeck (1):
      hwmon: (gpio-fan) Fix runtime PM imbalance in probe and teardown

Pablo Mazzini (1):
      hwmon: (sy7636a) fix negative temperatures

Rupesh Majhi (1):
      hwmon: (aht10) Fix update_interval overflow on 64-bit

Stanislav Aleksandrov (3):
      hwmon: (max31760) Fix the local temperature limit registers
      hwmon: (max31760) Leave standby mode at probe
      hwmon: (max31760) Report 0 RPM before the first fan speed measurement

Sudeep Holla (2):
      hwmon: (scmi) Check channel config allocation
      hwmon: (scmi) Configure sensors before exposing channels

Xu Rao (1):
      hwmon: (scmi) Enable temperature sensors using their sensor IDs

 drivers/hwmon/aht10.c         |   2 +-
 drivers/hwmon/gpio-fan.c      |  24 +++--
 drivers/hwmon/max31760.c      |  12 ++-
 drivers/hwmon/nct6775-core.c  |   6 +-
 drivers/hwmon/pmbus/mp2975.c  | 207 +++++++++++++++++++++++-------------------
 drivers/hwmon/scmi-hwmon.c    |  25 ++---
 drivers/hwmon/sy7636a-hwmon.c |   2 +-
 7 files changed, 150 insertions(+), 128 deletions(-)