mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arun Iyengar via B4 Relay <devnull+aiyengar1990.gmail.com@kernel.org>
To: Nicolas Dufresne <nicolas.dufresne@collabora.com>,
	 Benjamin Gaignard <benjamin.gaignard@collabora.com>,
	 Philipp Zabel <p.zabel@pengutronix.de>,
	 Mauro Carvalho Chehab <mchehab@kernel.org>,
	 Andrzej Pietrasiewicz <andrzej.p@collabora.com>,
	 Hans Verkuil <hverkuil@kernel.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	 linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	 Arun Iyengar <aiyengar1990@gmail.com>
Subject: [PATCH v2 4/4] media: verisilicon: Set the bit depth again when its control is rewritten
Date: Sun, 15 Nov 2026 08:39:49 +0000	[thread overview]
Message-ID: <20261115-hantro-fixes-v2-4-bfecfb07a3e7@gmail.com> (raw)
In-Reply-To: <20261115-hantro-fixes-v2-0-bfecfb07a3e7@gmail.com>

From: Arun Iyengar <aiyengar1990@gmail.com>

S_FMT on OUTPUT resets the CAPTURE format to 8 bits, but rewriting an
unchanged 10-bit HEVC SPS, VP9 frame or AV1 sequence control skips
s_ctrl, so the format stays 8-bit. Mark these controls EXECUTE_ON_WRITE;
every write of them then also sends a V4L2_EVENT_CTRL value change.

Fixes: 3c32d94c9c52 ("media: verisilicon: Do not change context bit depth before validating the format")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Iyengar <aiyengar1990@gmail.com>
---
 drivers/media/platform/verisilicon/hantro_drv.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
index 26e5d5547466..248fb0e23a29 100644
--- a/drivers/media/platform/verisilicon/hantro_drv.c
+++ b/drivers/media/platform/verisilicon/hantro_drv.c
@@ -534,6 +534,7 @@ static const struct hantro_ctrl controls[] = {
 		.cfg = {
 			.id = V4L2_CID_STATELESS_HEVC_SPS,
 			.ops = &hantro_hevc_ctrl_ops,
+			.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
 		},
 	}, {
 		.codec = HANTRO_HEVC_DECODER,
@@ -555,6 +556,7 @@ static const struct hantro_ctrl controls[] = {
 		.cfg = {
 			.id = V4L2_CID_STATELESS_VP9_FRAME,
 			.ops = &hantro_vp9_ctrl_ops,
+			.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
 		},
 	}, {
 		.codec = HANTRO_VP9_DECODER,
@@ -577,6 +579,7 @@ static const struct hantro_ctrl controls[] = {
 		.cfg = {
 			.id = V4L2_CID_STATELESS_AV1_SEQUENCE,
 			.ops = &hantro_av1_ctrl_ops,
+			.flags = V4L2_CTRL_FLAG_EXECUTE_ON_WRITE,
 		},
 	}, {
 		.codec = HANTRO_AV1_DECODER,
@@ -591,6 +594,7 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			      int allowed_codecs)
 {
 	int i, num_ctrls = ARRAY_SIZE(controls);
+	struct v4l2_ctrl *ctrl;
 
 	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls);
 
@@ -598,8 +602,8 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 		if (!(allowed_codecs & controls[i].codec))
 			continue;
 
-		v4l2_ctrl_new_custom(&ctx->ctrl_handler,
-				     &controls[i].cfg, NULL);
+		ctrl = v4l2_ctrl_new_custom(&ctx->ctrl_handler,
+					    &controls[i].cfg, NULL);
 		if (ctx->ctrl_handler.error) {
 			vpu_err("Adding control (%d) failed %d\n",
 				controls[i].cfg.id,
@@ -607,6 +611,10 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			v4l2_ctrl_handler_free(&ctx->ctrl_handler);
 			return ctx->ctrl_handler.error;
 		}
+
+		/* v4l2_ctrl_new_custom() drops cfg.flags of standard controls. */
+		if (ctrl)
+			ctrl->flags |= controls[i].cfg.flags & V4L2_CTRL_FLAG_EXECUTE_ON_WRITE;
 	}
 	return v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
 }

-- 
2.55.0



      parent reply	other threads:[~2026-11-15  8:39 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-15  8:39 [PATCH v2 0/4] media: verisilicon: Keep the CAPTURE format in line with the decoder Arun Iyengar via B4 Relay
2026-11-15  8:39 ` [PATCH v2 1/4] media: verisilicon: Size the VP8 segment map for the largest frame Arun Iyengar via B4 Relay
2026-11-15  8:39 ` [PATCH v2 2/4] media: verisilicon: Set need_postproc before resetting the CAPTURE format Arun Iyengar via B4 Relay
2026-11-15  8:39 ` [PATCH v2 3/4] media: verisilicon: Keep the CAPTURE format at the stream's bit depth Arun Iyengar via B4 Relay
2026-11-15  8:39 ` Arun Iyengar via B4 Relay [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261115-hantro-fixes-v2-4-bfecfb07a3e7@gmail.com \
    --to=devnull+aiyengar1990.gmail.com@kernel.org \
    --cc=aiyengar1990@gmail.com \
    --cc=andrzej.p@collabora.com \
    --cc=benjamin.gaignard@collabora.com \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=hverkuil@kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=p.zabel@pengutronix.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®