[PATCH] spi: sunplus-sp7021: Fix target transfer completion

[Felix Gu <ustc.gu@gmail.com>]

Target transfers wait on isr_done, but the target IRQ handler completes
target_isr. Consequently, a target interrupt does not wake the transfer
wait.

Use target_isr consistently for both TX and RX, and stop completing
isr_done in target_abort()

Found by code review, no hardware for test.

Fixes: f62ca4e2a863 ("spi: Add spi driver for Sunplus SP7021")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
---
 drivers/spi/spi-sunplus-sp7021.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-sunplus-sp7021.c b/drivers/spi/spi-sunplus-sp7021.c
index 54431c363bbc..c5706f557ce9 100644
--- a/drivers/spi/spi-sunplus-sp7021.c
+++ b/drivers/spi/spi-sunplus-sp7021.c
@@ -113,7 +113,6 @@ static int sp7021_spi_target_abort(struct spi_controller *ctlr)
 	struct sp7021_spi_ctlr *pspim = spi_controller_get_devdata(ctlr);
 
 	complete(&pspim->target_isr);
-	complete(&pspim->isr_done);
 	return 0;
 }
 
@@ -130,7 +129,7 @@ static int sp7021_spi_target_tx(struct spi_device *spi, struct spi_transfer *xfe
 	value = readl(pspim->s_base + SP7021_DATA_RDY_REG);
 	value |= SP7021_SLAVE_DATA_RDY;
 	writel(value, pspim->s_base + SP7021_DATA_RDY_REG);
-	if (wait_for_completion_interruptible(&pspim->isr_done)) {
+	if (wait_for_completion_interruptible(&pspim->target_isr)) {
 		dev_err(&spi->dev, "%s() wait_for_completion err\n", __func__);
 		return -EINTR;
 	}
@@ -142,12 +141,12 @@ static int sp7021_spi_target_rx(struct spi_device *spi, struct spi_transfer *xfe
 	struct sp7021_spi_ctlr *pspim = spi_controller_get_devdata(spi->controller);
 	u32 value;
 
-	reinit_completion(&pspim->isr_done);
+	reinit_completion(&pspim->target_isr);
 	value = SP7021_SLAVE_DMA_EN | FIELD_PREP(SP7021_SLAVE_DMA_CMD, 3);
 	writel(value, pspim->s_base + SP7021_SLAVE_DMA_CTRL_REG);
 	writel(xfer->len, pspim->s_base + SP7021_SLAVE_DMA_LENGTH_REG);
 	writel(xfer->rx_dma, pspim->s_base + SP7021_SLAVE_DMA_ADDR_REG);
-	if (wait_for_completion_interruptible(&pspim->isr_done)) {
+	if (wait_for_completion_interruptible(&pspim->target_isr)) {
 		dev_err(&spi->dev, "%s() wait_for_completion err\n", __func__);
 		return -EINTR;
 	}

---
base-commit: 793807ca13bf3072fc6d16ce6d90e9ab9beff2a5
change-id: 20261115-sunplus-sp7021-af094801e806

Best regards,
--  
Felix Gu <ustc.gu@gmail.com>