From: nhansp <nhan.094.vn@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Peter Griffin <peter.griffin@linaro.org>,
Alim Akhtar <alim.akhtar@samsung.com>,
Rob Herring <robh@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Kees Cook <kees@kernel.org>,
Tony Luck <tony.luck@intel.com>,
"Guilherme G. Piccoli" <gpiccoli@igalia.com>,
nhansp <nhan.094.vn@gmail.com>
Subject: [PATCH 0/2] Add support for Samsung Galaxy Note8 (SM-N950N)
Date: Mon, 16 Nov 2026 21:50:32 +0700 [thread overview]
Message-ID: <20261116-upstream-greatlte-dts-v1-0-768d49fb7d85@gmail.com> (raw)
Hi,
This series adds initial support for the Samsung Galaxy Note8
(SM-N950N), codenamed greatlte. It uses the same Exynos 8895 SoC as the
Galaxy S8 (dreamlte), which is already supported.
The device tree enables:
* simple-framebuffer
* 6GB RAM
* pstore/ramoops
* gpio-keys
This is enough to boot to a shell in an initramfs. More support will
follow.
The keys, framebuffer and ramoops region match dreamlte, but the board
gets its own file instead of a dtsi shared with it. I only have this
device, so I can't fully check how the bootloader lays out memory on
the other 8895 phones.
Like dreamlte, it boots through uniLoader [1], which sets the DECON
trigger control so that the framebuffer keeps refreshing.
dt_binding_check, dtbs_check W=1 and dt-check-style in strict and
stricter mode report nothing. On the device I booted next/dt64 with the
arm64 defconfig, plus ramoops, simpledrm and fbcon built in. All eight
CPUs come up and the kernel sees all 6GB. The console runs on the
framebuffer and all four keys report events. A panic triggered through
sysrq was still in pstore after the reboot.
The test image was flashed to the RECOVERY partition and booted from
there, with this kernel command line:
console=tty0 fbcon=font:TER16x32 clk_ignore_unused pd_ignore_unused panic=15 rdinit=/init
[1] https://github.com/ivoszbg/uniLoader
---
nhansp (2):
dt-bindings: arm: samsung: Document greatlte board binding
arm64: dts: exynos: Add initial support for Samsung Galaxy Note8
.../bindings/arm/samsung/samsung-boards.yaml | 1 +
arch/arm64/boot/dts/exynos/Makefile | 1 +
arch/arm64/boot/dts/exynos/exynos8895-greatlte.dts | 124 +++++++++++++++++++++
3 files changed, 126 insertions(+)
---
base-commit: 65ffdae53a6d522519fbd66d3cabbb4622e3e5bc
change-id: 20261116-upstream-greatlte-dts-f29792d1689a
Best regards,
--
nhansp <nhan.094.vn@gmail.com>
next reply other threads:[~2026-11-16 14:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 14:50 nhansp [this message]
2026-11-16 14:50 ` [PATCH 1/2] dt-bindings: arm: samsung: Document greatlte board binding nhansp
2026-11-16 14:50 ` [PATCH 2/2] arm64: dts: exynos: Add initial support for Samsung Galaxy Note8 nhansp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116-upstream-greatlte-dts-v1-0-768d49fb7d85@gmail.com \
--to=nhan.094.vn@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gpiccoli@igalia.com \
--cc=kees@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=peter.griffin@linaro.org \
--cc=robh@kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®