From: Leonard Lausen <leonard@lausen.nl>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: leonard@lausen.nl, Luka Gejak <luka.gejak@linux.dev>,
Shawn Lin <shawn.lin@rock-chips.com>,
Heiko Stuebner <heiko@sntech.de>,
linux-wireless@vger.kernel.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH rtw-next v2 1/2] wifi: rtw88: 8822c: filter hardware-handled control frames on SDIO
Date: Mon, 16 Nov 2026 10:08:03 +0000 [thread overview]
Message-ID: <20261116100804.425592-4-leonard@lausen.nl> (raw)
In-Reply-To: <20261116100804.425592-2-leonard@lausen.nl>
RTL8822C forwards every control-frame subtype to the host by default.
ACK, Block Ack, RTS and CTS frames are handled by hardware, but forwarding
them also adds small SDIO transfers to the data path.
Clear these four subtypes from the SDIO default RX filter. Retain BAR,
PS-Poll and the remaining subtypes, and store the default in rxfltmap1
so FIF_CONTROL can still request all control frames.
Limit the new default to SDIO, where profiling identified this overhead.
PCIe and USB receive paths have not been tested with this filter setting.
FriendlyElec's RTL8822CS driver also filters control frames at startup;
this change retains additional subtypes for mac80211.
Link: https://github.com/friendlyarm/rtl8822cs/blob/c8b944a34bba2116fcdb060362bde40242bb87e5/hal/rtl8822c/rtl8822c_halinit.c
Signed-off-by: Leonard Lausen <leonard@lausen.nl>
---
drivers/net/wireless/realtek/rtw88/reg.h | 4 ++++
drivers/net/wireless/realtek/rtw88/rtw8822c.c | 10 ++++++++++
2 files changed, 14 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index afcdb66fdb9a1..8e220580be4f8 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -587,6 +587,10 @@
#define REG_RXFLTMAP0 0x06A0
#define REG_RXFLTMAP1 0x06A2
+#define BIT_RXFLTMAP1_BACK BIT(9)
+#define BIT_RXFLTMAP1_RTS BIT(11)
+#define BIT_RXFLTMAP1_CTS BIT(12)
+#define BIT_RXFLTMAP1_ACK BIT(13)
#define REG_RXFLTMAP2 0x06A4
#define REG_RXFLTMAP4 0x068A
#define REG_BT_COEX_TABLE0 0x06C0
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index 09315d23e2c40..03e714c3c2e7a 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -2096,6 +2096,16 @@ static int rtw8822c_mac_init(struct rtw_dev *rtwdev)
rtw_write8(rtwdev, REG_WMAC_TRXPTCL_CTL_H + 2, WLAN_BAR_ACK_TYPE);
rtw_write16(rtwdev, REG_RXFLTMAP0, WLAN_RX_FILTER0);
rtwdev->hal.rxfltmap1 = WLAN_RX_FILTER1;
+ if (rtw_hci_type(rtwdev) == RTW_HCI_TYPE_SDIO) {
+ /*
+ * Hardware handles these frames; retain BAR and PS-Poll for
+ * mac80211. FIF_CONTROL restores all subtypes for monitors.
+ */
+ rtwdev->hal.rxfltmap1 &= ~(BIT_RXFLTMAP1_BACK |
+ BIT_RXFLTMAP1_RTS |
+ BIT_RXFLTMAP1_CTS |
+ BIT_RXFLTMAP1_ACK);
+ }
rtw_write16(rtwdev, REG_RXFLTMAP1, rtwdev->hal.rxfltmap1);
rtw_write16(rtwdev, REG_RXFLTMAP2, WLAN_RX_FILTER2);
rtw_write32(rtwdev, REG_RCR, WLAN_RCR_CFG);
next prev parent reply other threads:[~2026-11-16 10:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 10:08 [PATCH rtw-next v2 0/2] wifi: rtw88: reduce RTL8822CS SDIO request overhead Leonard Lausen
2026-11-16 10:08 ` Leonard Lausen [this message]
2026-11-16 10:08 ` [PATCH rtw-next v2 2/2] wifi: rtw88: sdio: combine free TX page register reads Leonard Lausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116100804.425592-4-leonard@lausen.nl \
--to=leonard@lausen.nl \
--cc=heiko@sntech.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luka.gejak@linux.dev \
--cc=pkshih@realtek.com \
--cc=shawn.lin@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®