From: Lukasz Majewski <lukma@nabladev.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Shawn Guo <shawnguo@kernel.org>,
Guenter Roeck <linux@roeck-us.net>,
Daniel Baluta <daniel.baluta@nxp.com>,
Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Lukasz Majewski <lukma@nabladev.com>
Subject: [PATCH v3 2/3] dt-bindings: hwmon: Add National/TI LM77 temperature sensor
Date: Mon, 16 Nov 2026 12:18:01 +0100 [thread overview]
Message-ID: <20261116111802.2442456-2-lukma@nabladev.com> (raw)
In-Reply-To: <20261116111802.2442456-1-lukma@nabladev.com>
Add binding description for National/TI LM77 temperature sensor.
When compared to LM75 - it has two output pins one for interrupt
and another one to signal the critical temperature alarm.
It also has only two I2C address pins (A0 and A1) - possible I2C
addresses are: 0x4[89ab].
Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
---
Changes for v3:
- New patch, as this IC description is added to Documentation/hwmon
as a separate entry and not to trivial devices
---
.../bindings/hwmon/national,lm77.yaml | 66 +++++++++++++++++++
1 file changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/national,lm77.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm77.yaml b/Documentation/devicetree/bindings/hwmon/national,lm77.yaml
new file mode 100644
index 000000000000..fbb6e711342c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/national,lm77.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/national,lm77.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: National Semiconductor / TI LM77 Temperature Sensor
+
+maintainers:
+ - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+ The LM77 is a 9-bit plus sign digital temperature sensor and thermal window
+ comparator with a 2-wire (I2C) interface.
+
+ Unlike the LM75, which has a single alert output, the LM77 features two
+ separate open-drain outputs: an Interrupt (INT) output and a Critical
+ Temperature Alarm (T_CRIT_A) output.
+
+properties:
+ compatible:
+ const: national,lm77
+
+ reg:
+ maxItems: 1
+ description: |
+ I2C address of the device. Depending on the A0 and A1 pins, this
+ can be 0x48, 0x49, 0x4a, or 0x4b.
+
+ vs-supply:
+ description: +VS power supply regulator.
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ description: |
+ The LM77 has two open-drain interrupt outputs.
+ - The first interrupt should be the INT pin (window comparator).
+ - The second (optional) interrupt is the T_CRIT_A pin (critical
+ over-temp limit).
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@49 {
+ compatible = "national,lm77";
+ reg = <0x49>;
+ vs-supply = <&vcc_3v3_reg>;
+ interrupt-parent = <&gpio1>;
+
+ /* INT routed to GPIO1_12, T_CRIT_A routed to GPIO1_13 */
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>,
+ <13 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
--
2.39.5
next prev parent reply other threads:[~2026-11-16 11:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 11:18 [PATCH v3 1/3] dt-bindings: arm: fsl: Add an entry for Cloos CBASE board Lukasz Majewski
2026-11-16 11:18 ` Lukasz Majewski [this message]
2026-11-16 11:18 ` [PATCH v3 3/3] arm64: dts: freescale: Add device tree definition for Cloos CBASE with i.MX8MM Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116111802.2442456-2-lukma@nabladev.com \
--to=lukma@nabladev.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=jonathan.cameron@oss.qualcomm.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®