mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mehmet Fide <mehmet.fide@gmail.com>
To: Andi Shyti <andi.shyti@kernel.org>,
	Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
	Frank Li <Frank.Li@nxp.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Stefan Eichenberger <stefan.eichenberger@toradex.com>,
	Stefan Eichenberger <eichest@gmail.com>,
	linux-i2c@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, mehmet.fide@screeningeagle.com
Subject: [PATCH] i2c: imx: keep the error of a failed read
Date: Mon, 16 Nov 2026 13:59:40 +0100	[thread overview]
Message-ID: <20261116125940.1368194-1-mehmet.fide@gmail.com> (raw)

From: Mehmet Fide <mehmet.fide@screeningeagle.com>

When the count byte of an SMBus block read is larger than
I2C_SMBUS_BLOCK_MAX, i2c_imx_isr_read_block_data_len() sets -EPROTO and
fails the read. The read of I2DR that took the count byte has started
the reception of one more byte, and its interrupt comes in while the
state is IMX_I2C_STATE_FAILED. i2c_imx_master_isr() has no case for
that state, so the default case replaces -EPROTO with -EINVAL.

Ignore interrupts in IMX_I2C_STATE_FAILED so that the first error is
returned.

Fixes: 5f5c2d4579ca ("i2c: imx: prevent rescheduling in non dma mode")
Signed-off-by: Mehmet Fide <mehmet.fide@screeningeagle.com>
---

Notes:
    Tested on a Colibri VF50 on the Iris carrier, kernel at this base plus
    "i2c: imx: acknowledge the count byte of an atomic block read" and
    "i2c: imx: do not acknowledge the last byte of a block read of one
    byte", with the M41T0 RTC at 0x68. A test-only hook passed the messages
    that i2c_smbus_xfer_emulated() builds for a block read to the adapter,
    alone and followed by a one byte read. Register 0x03 (0xae) as count
    byte: without the patch -EINVAL 40 of 40, and a print in the default
    case showed state IMX_I2C_STATE_FAILED with -EPROTO each time; with it
    -EPROTO 100 of 100, as the atomic read returns. Count bytes of 0, 1 and
    0x13 read the same bytes as before, and the bus works after each
    failed read.

 drivers/i2c/busses/i2c-imx.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index ccf08cd63151..c7fef98934d4 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1142,6 +1142,9 @@ static irqreturn_t i2c_imx_master_isr(struct imx_i2c_struct *i2c_imx, unsigned i
 		wake_up(&i2c_imx->queue);
 		break;
 
+	case IMX_I2C_STATE_FAILED:
+		break;
+
 	default:
 		i2c_imx->i2csr = status;
 		i2c_imx->state = IMX_I2C_STATE_FAILED;

base-commit: 25e7ab89f4774b0f842cee0e8a20c11f755924d5
-- 
2.56.0


                 reply	other threads:[~2026-11-16 12:59 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261116125940.1368194-1-mehmet.fide@gmail.com \
    --to=mehmet.fide@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=andi.shyti@kernel.org \
    --cc=eichest@gmail.com \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mehmet.fide@screeningeagle.com \
    --cc=o.rempel@pengutronix.de \
    --cc=s.hauer@pengutronix.de \
    --cc=stefan.eichenberger@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®