From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Mikko Perttunen <mperttunen@nvidia.com>,
Svyatoslav Ryhel <clamor95@gmail.com>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v7 06/12] drm/tegra: dc: Add elements required by Tegra MIPI DBI
Date: Mon, 16 Nov 2026 17:10:11 +0200 [thread overview]
Message-ID: <20261116151017.274764-7-clamor95@gmail.com> (raw)
In-Reply-To: <20261116151017.274764-1-clamor95@gmail.com>
Add DC register definitions with additional fields in preparation for
adding the 8-bit CPU interface (MIPI DBI).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
drivers/gpu/drm/tegra/dc.h | 194 ++++++++++++++++++++++++++++++++++---
1 file changed, 183 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dc.h b/drivers/gpu/drm/tegra/dc.h
index 0cb0515968b35..e8913c5530a2d 100644
--- a/drivers/gpu/drm/tegra/dc.h
+++ b/drivers/gpu/drm/tegra/dc.h
@@ -272,14 +272,150 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
#define DC_COM_CRC_CONTROL_WAIT (1 << 1)
#define DC_COM_CRC_CONTROL_ENABLE (1 << 0)
#define DC_COM_CRC_CHECKSUM 0x301
-#define DC_COM_PIN_OUTPUT_ENABLE(x) (0x302 + (x))
-#define DC_COM_PIN_OUTPUT_POLARITY(x) (0x306 + (x))
-#define LVS_OUTPUT_POLARITY_LOW (1 << 28)
-#define LHS_OUTPUT_POLARITY_LOW (1 << 30)
-#define DC_COM_PIN_OUTPUT_DATA(x) (0x30a + (x))
-#define DC_COM_PIN_INPUT_ENABLE(x) (0x30e + (x))
-#define DC_COM_PIN_INPUT_DATA(x) (0x312 + (x))
-#define DC_COM_PIN_OUTPUT_SELECT(x) (0x314 + (x))
+
+#define DC_COM_PIN_OUTPUT_ENABLE(x) (0x302 + (x))
+#define DC_COM_PIN_OUTPUT_POLARITY(x) (0x306 + (x))
+#define LVS_OUTPUT_POLARITY_LOW BIT(28)
+#define LHS_OUTPUT_POLARITY_LOW BIT(30)
+#define DC_COM_PIN_OUTPUT_DATA(x) (0x30a + (x))
+/* Pin unmask is 1 bit above position of the pin in the OUTPUT_DATA register */
+#define PIN_UNMASK(x) BIT((x) + 1)
+#define DC_COM_PIN_INPUT_ENABLE(x) (0x30e + (x))
+
+/*
+ * The definitions below describe pin positions in the DC_COM_PIN_OUTPUT_ENABLE(x),
+ * DC_COM_PIN_OUTPUT_POLARITY(x), DC_COM_PIN_OUTPUT_DATA(x), and
+ * DC_COM_PIN_INPUT_ENABLE(x) registers. The comment before each group indicates
+ * the index of the register (the x value).
+ */
+
+/* 0 */
+#define PIN_LD0 0
+#define PIN_LD1 2
+#define PIN_LD2 4
+#define PIN_LD3 6
+#define PIN_LD4 8
+#define PIN_LD5 10
+#define PIN_LD6 12
+#define PIN_LD7 14
+#define PIN_LD8 16
+#define PIN_LD9 18
+#define PIN_LD10 20
+#define PIN_LD11 22
+#define PIN_LD12 24
+#define PIN_LD13 26
+#define PIN_LD14 28
+#define PIN_LD15 30
+
+/* 1 */
+#define PIN_LD16 0
+#define PIN_LD17 2
+#define PIN_LPW0 16
+#define PIN_LPW1 18
+#define PIN_LPW2 20
+#define PIN_LSC0 24
+#define PIN_LSC1 26
+#define PIN_LVS 28
+#define PIN_LHS 30
+
+/* 2 */
+#define PIN_LHP0 0
+#define PIN_LHP1 2
+#define PIN_LHP2 4
+#define PIN_LVP0 8
+#define PIN_LVP1 10
+#define PIN_LM0 16
+#define PIN_LM1 18
+#define PIN_LDI 20
+#define PIN_LPP 22
+
+/* 3 */
+#define PIN_LSCK 0
+#define PIN_LSDA 2
+#define PIN_LCSN 4
+#define PIN_LDC 6
+#define PIN_LSPI 8
+#define PIN_LSDI 10
+
+#define DC_COM_PIN_INPUT_DATA(x) (0x312 + (x))
+
+/*
+ * DC_COM_PIN_OUTPUT_SELECT(x) is a set of 7 registers that allow selecting
+ * one of 7 functions for each pin using 3 bits. Clearing all bits sets
+ * the pin to its primary function, while setting them to 1 configures it
+ * as a GPIO output. Other functions are unique to each pin. For details,
+ * check "23.7.17 DC_COM_PIN_OUTPUT_SELECT0_0" in the Tegra30 TRM.
+ */
+#define DC_COM_PIN_OUTPUT_SELECT(x) (0x314 + (x))
+#define PIN_OUTPUT_SELECT_MASK(x) (0x7 << (x))
+#define PIN_OUTPUT_SELECT_PRIM(x) (0 << (x))
+#define PIN_OUTPUT_SELECT_OUT(x) (1 << (x))
+#define PIN_OUTPUT_SELECT_F2(x) (2 << (x))
+#define PIN_OUTPUT_SELECT_F3(x) (3 << (x))
+#define PIN_OUTPUT_SELECT_F4(x) (4 << (x))
+#define PIN_OUTPUT_SELECT_F5(x) (5 << (x))
+#define PIN_OUTPUT_SELECT_F6(x) (6 << (x))
+#define PIN_OUTPUT_SELECT_F7(x) (7 << (x))
+
+/*
+ * The definitions below describe pin offset in the DC_COM_PIN_OUTPUT_SELECT(x)
+ * registers. The comment before each group indicates the index of the register
+ * (the x value).
+ */
+
+/* 0 */
+#define PIN_OUTPUT_SELECT_LD0 0
+#define PIN_OUTPUT_SELECT_LD1 4
+#define PIN_OUTPUT_SELECT_LD2 8
+#define PIN_OUTPUT_SELECT_LD3 12
+#define PIN_OUTPUT_SELECT_LD4 16
+#define PIN_OUTPUT_SELECT_LD5 20
+#define PIN_OUTPUT_SELECT_LD6 24
+#define PIN_OUTPUT_SELECT_LD7 28
+
+/* 1 */
+#define PIN_OUTPUT_SELECT_LD8 0
+#define PIN_OUTPUT_SELECT_LD9 4
+#define PIN_OUTPUT_SELECT_LD10 8
+#define PIN_OUTPUT_SELECT_LD11 12
+#define PIN_OUTPUT_SELECT_LD12 16
+#define PIN_OUTPUT_SELECT_LD13 20
+#define PIN_OUTPUT_SELECT_LD14 24
+#define PIN_OUTPUT_SELECT_LD15 28
+
+/* 2 */
+#define PIN_OUTPUT_SELECT_LD16 0
+#define PIN_OUTPUT_SELECT_LD17 4
+
+/* 3 */
+#define PIN_OUTPUT_SELECT_LPW0 0
+#define PIN_OUTPUT_SELECT_LPW1 4
+#define PIN_OUTPUT_SELECT_LPW2 8
+#define PIN_OUTPUT_SELECT_LSC0 16
+#define PIN_OUTPUT_SELECT_LSC1 20
+#define PIN_OUTPUT_SELECT_LVS 24
+#define PIN_OUTPUT_SELECT_LHS 28
+
+/* 4 */
+#define PIN_OUTPUT_SELECT_LHP0 0
+#define PIN_OUTPUT_SELECT_LHP1 4
+#define PIN_OUTPUT_SELECT_LHP2 8
+#define PIN_OUTPUT_SELECT_LVP0 16
+#define PIN_OUTPUT_SELECT_LVP1 20
+
+/* 5 */
+#define PIN_OUTPUT_SELECT_LM0 0
+#define PIN_OUTPUT_SELECT_LM1 4
+#define PIN_OUTPUT_SELECT_LDI 8
+#define PIN_OUTPUT_SELECT_LPP 12
+
+/* 6 */
+#define PIN_OUTPUT_SELECT_LSCK 0
+#define PIN_OUTPUT_SELECT_LSDA 4
+#define PIN_OUTPUT_SELECT_LCSN 8
+#define PIN_OUTPUT_SELECT_LDC 12
+#define PIN_OUTPUT_SELECT_LSPI 16
+#define PIN_OUTPUT_SELECT_LSDI 20
#define DC_COM_PIN_MISC_CONTROL 0x31b
#define DC_COM_PIN_PM0_CONTROL 0x31c
@@ -303,9 +439,15 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
#define UNDERFLOW_REPORT_ENABLE (1 << 0)
#define DC_DISP_DISP_SIGNAL_OPTIONS0 0x400
-#define H_PULSE0_ENABLE (1 << 8)
-#define H_PULSE1_ENABLE (1 << 10)
-#define H_PULSE2_ENABLE (1 << 12)
+#define H_PULSE0_ENABLE BIT(8)
+#define H_PULSE1_ENABLE BIT(10)
+#define H_PULSE2_ENABLE BIT(12)
+#define V_PULSE0_ENABLE BIT(16)
+#define V_PULSE1_ENABLE BIT(18)
+#define V_PULSE2_ENABLE BIT(19)
+#define V_PULSE3_ENABLE BIT(20)
+#define M0_ENABLE BIT(24)
+#define M1_ENABLE BIT(26)
#define DC_DISP_DISP_SIGNAL_OPTIONS1 0x401
@@ -456,6 +598,22 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
#define DC_DISP_SHIFT_CLOCK_OPTIONS 0x431
#define SC1_H_QUALIFIER_NONE (1 << 16)
#define SC0_H_QUALIFIER_NONE (1 << 0)
+#define SC0_H_QUALIFIER(x) (((x) & 0x7) << 0)
+#define SC1_H_QUALIFIER(x) (((x) & 0x7) << 16)
+#define SC_H_QUALIFIER_DISABLE 0
+#define SC_H_QUALIFIER_NONE 1
+#define SC_H_QUALIFIER_HACTIVE 2
+#define SC_H_QUALIFIER_EXT_HACTIVE 3
+#define SC_H_QUALIFIER_HPULSE 4
+#define SC_H_QUALIFIER_EXT_HPULSE 5
+#define SC0_V_QUALIFIER(x) (((x) & 0x7) << 3)
+#define SC1_V_QUALIFIER(x) (((x) & 0x7) << 19)
+#define SC_V_QUALIFIER_NONE 0
+#define SC_V_QUALIFIER_RSVD 1
+#define SC_V_QUALIFIER_VACTIVE 2
+#define SC_V_QUALIFIER_EXT_VACTIVE 3
+#define SC_V_QUALIFIER_VPULSE 4
+#define SC_V_QUALIFIER_EXT_VPULSE 5
#define DC_DISP_DATA_ENABLE_OPTIONS 0x432
#define DE_SELECT_ACTIVE_BLANK (0 << 0)
@@ -493,6 +651,20 @@ int tegra_dc_rgb_exit(struct tegra_dc *dc);
#define DC_DISP_CURSOR_POSITION_NS 0x441
#define DC_DISP_INIT_SEQ_CONTROL 0x442
+#define SEND_INIT_SEQUENCE BIT(0)
+#define INIT_SEQUENCE_MODE_SPI BIT(1)
+#define INIT_SEQUENCE_MODE_PLCD 0
+#define INIT_SEQ_DC_SIGNAL_SHIFT 4
+#define INIT_SEQ_DC_SIGNAL_MASK (0x7 << INIT_SEQ_DC_SIGNAL_SHIFT)
+#define NO_DC_SIGNAL 0
+#define DC_SIGNAL_VSYNC 1
+#define DC_SIGNAL_VPULSE0 2
+#define DC_SIGNAL_VPULSE1 3
+#define DC_SIGNAL_VPULSE2 4
+#define DC_SIGNAL_VPULSE3 5
+#define INIT_SEQ_DC_CONTROL_SHIFT 7
+#define FRAME_INIT_SEQ_CYCLES_SHIFT 8
+
#define DC_DISP_SPI_INIT_SEQ_DATA_A 0x443
#define DC_DISP_SPI_INIT_SEQ_DATA_B 0x444
#define DC_DISP_SPI_INIT_SEQ_DATA_C 0x445
--
2.53.0
next prev parent reply other threads:[~2026-11-16 15:10 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 15:10 [PATCH v7 00/12] drm/tegra: Add support for Tegra20/Tegra30 8-bit CPU interface Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 01/12] drm: Add MIPI DBI bus support for MIPI DBI Type A and B Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 02/12] drm/panel: panel-hitachi-tx10d07vm0baa: Convert to use MIPI DBI bus Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 03/12] drm/panel: panel-hitachi-tx10d07vm0baa: Drop redundant disable() operation Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 04/12] drm/panel: panel-lg-lh400wv3: Convert to use MIPI DBI bus Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 05/12] drm/panel: panel-lg-lh400wv3: Drop redundant disable() operation Svyatoslav Ryhel
2026-11-16 15:10 ` Svyatoslav Ryhel [this message]
2026-11-16 15:10 ` [PATCH v7 07/12] dt-bindings: display: tegra: Document Tegra20 DSI port Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 08/12] drm/tegra: output: Make panel parsing configurable Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 09/12] drm/tegra: Convert to use atomic versions of drm_encoder_helper_funcs Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 10/12] drm/tegra: rgb: Parameterize configuration based on bus flags Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 11/12] dt-bindings: display: tegra: Document 8-bit CPU parallel interface Svyatoslav Ryhel
2026-11-16 15:10 ` [PATCH v7 12/12] drm/tegra: Add support for 8-bit CPU interface Svyatoslav Ryhel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116151017.274764-7-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mperttunen@nvidia.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=thierry.reding@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®