From: Angelo Compagnucci <angelo.compagnucci@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
Angelo Compagnucci <angelo.compagnucci@gmail.com>
Subject: [PATCH 2/2] mtd: spinand: xtx: add support for XT26G04C
Date: Mon, 16 Nov 2026 16:28:47 +0100 [thread overview]
Message-ID: <20261116152847.3658486-3-angelo.compagnucci@gmail.com> (raw)
In-Reply-To: <20261116152847.3658486-1-angelo.compagnucci@gmail.com>
Add the XTX XT26G04C. It is a 4Gbit 3.3V SPI NAND with 4096 byte pages,
256 byte OOB and 8-bit on-die ECC.
The status register reports the number of corrected bits in bits 7:4.
Values 0 to 8 are valid and 0xf means an uncorrectable error. The other
XTX parts use a different format, so add a new ECC status function.
The values come from the XTX XT26G04C datasheet, Rev 1.9.
Tested on an STM32MP133 board with UBI and UBIFS.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
---
drivers/mtd/nand/spi/xtx.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/mtd/nand/spi/xtx.c b/drivers/mtd/nand/spi/xtx.c
index 5915b37b4..70f853678 100644
--- a/drivers/mtd/nand/spi/xtx.c
+++ b/drivers/mtd/nand/spi/xtx.c
@@ -22,6 +22,9 @@
#define XT26XXXD_STATUS_ECC_8_CORRECTED (3)
#define XT26XXXD_STATUS_ECC_UNCOR_ERROR (2)
+#define XT26G0XC_STATUS_ECC_MASK GENMASK(7, 4)
+#define XT26G0XC_STATUS_ECC_UNCOR_ERROR (0xf)
+
static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_1S_4S_4S_OP(0, 1, NULL, 0, 0),
SPINAND_PAGE_READ_FROM_CACHE_1S_1S_4S_OP(0, 1, NULL, 0, 0),
@@ -138,6 +141,21 @@ static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
return -EINVAL;
}
+
+static int xt26g0xc_ecc_get_status(struct spinand_device *spinand,
+ u8 status)
+{
+ u8 eccsr = FIELD_GET(XT26G0XC_STATUS_ECC_MASK, status);
+
+ if (eccsr <= 8)
+ return eccsr;
+
+ if (eccsr == XT26G0XC_STATUS_ECC_UNCOR_ERROR)
+ return -EBADMSG;
+
+ return -EINVAL;
+}
+
static const struct spinand_info xtx_spinand_table[] = {
SPINAND_INFO("XT26G01A",
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
@@ -249,6 +267,16 @@ static const struct spinand_info xtx_spinand_table[] = {
0,
SPINAND_ECCINFO(&xt26xxxd_ooblayout,
xt26xxxd_ecc_get_status)),
+ SPINAND_INFO("XT26G04C",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x13),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+ xt26g0xc_ecc_get_status)),
};
static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {
--
2.53.0
prev parent reply other threads:[~2026-11-16 15:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 15:28 [PATCH 0/2] mtd: spinand: add GD5F4GM7UExxG and XT26G04C Angelo Compagnucci
2026-11-16 15:28 ` [PATCH 1/2] mtd: spinand: gigadevice: add support for GD5F4GM7UExxG Angelo Compagnucci
2026-11-16 15:28 ` Angelo Compagnucci [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116152847.3658486-3-angelo.compagnucci@gmail.com \
--to=angelo.compagnucci@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®