From: Arnav Kapoor <kapoorarnav43@gmail.com>
To: "Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: Ike Panhc <ikepanhc@gmail.com>,
Mark Pearson <mpearson-lenovo@squebb.ca>,
"Derek J . Clark" <derekjohn.clark@gmail.com>,
Rong Zhang <i@rong.moe>,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org,
Arnav Kapoor <kapoorarnav43@gmail.com>
Subject: [PATCH] platform/x86: ideapad-laptop: Add V14 G2 ITL to ideapad_dytc_v4_allow_table[]
Date: Mon, 16 Nov 2026 22:48:10 +0530 [thread overview]
Message-ID: <20261116171817.21802-1-kapoorarnav43@gmail.com> (raw)
The Lenovo V14 G2 ITL (82KA) uses DYTC version 4 for platform profile
control, so ideapad-laptop currently skips it and logs:
DYTC_VERSION 4 support may not work. Pass ideapad_laptop.allow_v4_dytc=Y on the kernel commandline to enable
With allow_v4_dytc=Y, platform_profile registers with low-power,
balanced and performance. Each profile reads back after it is set, no
ACPI errors are logged when switching, and the firmware applies it:
with all CPUs busy on AC power, the sustained package power was about
14 W in low-power, 17 W in balanced and 24 W in performance.
Add the V14 G2 ITL to ideapad_dytc_v4_allow_table[].
Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com>
---
Tested on a V14 G2 ITL (BIOS GGCN55WW) with the 7.0 kernel's
ideapad-laptop and allow_v4_dytc=Y, which takes the same path as this
table entry; the patch itself is build-tested (W=1) on pdx86 for-next.
Package power is the RAPL energy
counter over the last 20 s of a 45 s all-CPU busy loop, on AC, with
60 s of cooldown between profiles. Fn+Q does not switch profiles on
this model.
drivers/platform/x86/lenovo/ideapad-laptop.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/platform/x86/lenovo/ideapad-laptop.c b/drivers/platform/x86/lenovo/ideapad-laptop.c
index 91a8d11c79c5..ebd4bf6c8798 100644
--- a/drivers/platform/x86/lenovo/ideapad-laptop.c
+++ b/drivers/platform/x86/lenovo/ideapad-laptop.c
@@ -1134,6 +1134,13 @@ static const struct dmi_system_id ideapad_dytc_v4_allow_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "IdeaPad 5 15ITL05")
}
},
+ {
+ /* V14 G2 ITL */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "V14 G2 ITL")
+ }
+ },
{}
};
base-commit: a362539b42193dcdb17f8fba40031a515c53885c
--
2.53.0
next reply other threads:[~2026-11-16 17:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 17:18 Arnav Kapoor [this message]
2026-11-16 17:31 ` Rong Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116171817.21802-1-kapoorarnav43@gmail.com \
--to=kapoorarnav43@gmail.com \
--cc=derekjohn.clark@gmail.com \
--cc=hansg@kernel.org \
--cc=i@rong.moe \
--cc=ikepanhc@gmail.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpearson-lenovo@squebb.ca \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®