From: Antonio Quartulli <antonio@mandelbit.com>
To: netdev@vger.kernel.org
Cc: Antonio Quartulli <antonio@mandelbit.com>,
Kuniyuki Iwashima <kuniyu@google.com>,
David Ahern <dsahern@kernel.org>,
Ido Schimmel <idosch@nvidia.com>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Neal Cardwell <ncardwell@google.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next] net: use inet_rcv_saddr_any() in udp_tunnel and ping
Date: Mon, 16 Nov 2026 21:08:53 +0100 [thread overview]
Message-ID: <20261116200854.3799498-1-antonio@mandelbit.com> (raw)
udp_tunnel_core.c carries its own copy of inet_rcv_saddr_any(),
sk_saddr_any(), as it can be built as a module while
inet_rcv_saddr_any() is not exported, and ping_bind() open-codes the
same check for its AF_INET and AF_INET6 sockets.
Make inet_rcv_saddr_any() a static inline in <net/addrconf.h>, where it
is already declared, and use it in both places.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/netdev/avVVzxL3pVZc6yQ5@google.com/
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
---
@Kuniyuki:
the helper can't go to <net/sock.h> as suggested, since it needs
ipv6_addr_any() and <net/ipv6.h> includes <net/sock.h>.
I hope <net/addrconf.h> is fine too.
include/net/addrconf.h | 12 +++++++++++-
net/ipv4/inet_connection_sock.c | 9 ---------
net/ipv4/ping.c | 8 ++------
net/ipv4/udp_tunnel_core.c | 12 ++----------
4 files changed, 15 insertions(+), 26 deletions(-)
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 6818057cf727..0ec4db881404 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -149,7 +149,17 @@ int ipv6_get_lladdr(struct net_device *dev, struct in6_addr *addr,
u32 banned_flags);
bool inet_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2,
bool match_wildcard);
-bool inet_rcv_saddr_any(const struct sock *sk);
+
+/* whether @sk is bound to the wildcard address of its family */
+static inline bool inet_rcv_saddr_any(const struct sock *sk)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6)
+ return ipv6_addr_any(&sk->sk_v6_rcv_saddr);
+#endif
+ return !sk->sk_rcv_saddr;
+}
+
void addrconf_join_solict(struct net_device *dev, const struct in6_addr *addr);
void addrconf_leave_solict(struct inet6_dev *idev, const struct in6_addr *addr);
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 5807067083c9..c6f7c3550013 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -109,15 +109,6 @@ bool inet_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2,
match_wildcard);
}
-bool inet_rcv_saddr_any(const struct sock *sk)
-{
-#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == AF_INET6)
- return ipv6_addr_any(&sk->sk_v6_rcv_saddr);
-#endif
- return !sk->sk_rcv_saddr;
-}
-
/**
* inet_sk_get_local_port_range - fetch ephemeral ports range
* @sk: socket
diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c
index 223a0108b74c..ceb0af8c70a3 100644
--- a/net/ipv4/ping.c
+++ b/net/ipv4/ping.c
@@ -40,11 +40,11 @@
#include <net/route.h>
#include <net/inet_common.h>
#include <net/checksum.h>
+#include <net/addrconf.h>
#if IS_ENABLED(CONFIG_IPV6)
#include <linux/in6.h>
#include <linux/icmpv6.h>
-#include <net/addrconf.h>
#include <net/ipv6.h>
#include <net/transp_v6.h>
#endif
@@ -439,12 +439,8 @@ int ping_bind(struct sock *sk, struct sockaddr_unsized *uaddr, int addr_len)
sk->sk_bound_dev_if);
err = 0;
- if (sk->sk_family == AF_INET && isk->inet_rcv_saddr)
+ if (!inet_rcv_saddr_any(sk))
sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
-#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == AF_INET6 && !ipv6_addr_any(&sk->sk_v6_rcv_saddr))
- sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
-#endif
if (snum)
sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
diff --git a/net/ipv4/udp_tunnel_core.c b/net/ipv4/udp_tunnel_core.c
index 29581c94fdcf..c2888aa2bbe6 100644
--- a/net/ipv4/udp_tunnel_core.c
+++ b/net/ipv4/udp_tunnel_core.c
@@ -3,6 +3,7 @@
#include <linux/errno.h>
#include <linux/socket.h>
#include <linux/kernel.h>
+#include <net/addrconf.h>
#include <net/dst_metadata.h>
#include <net/flow.h>
#include <net/udp.h>
@@ -59,15 +60,6 @@ int udp_sock_create4(struct net *net, struct udp_port_cfg *cfg,
}
EXPORT_SYMBOL(udp_sock_create4);
-static bool sk_saddr_any(struct sock *sk)
-{
-#if IS_ENABLED(CONFIG_IPV6)
- if (sk->sk_family == AF_INET6)
- return ipv6_addr_any(&sk->sk_v6_rcv_saddr);
-#endif
- return !sk->sk_rcv_saddr;
-}
-
void setup_udp_tunnel_sock(struct net *net, struct sock *sk,
struct udp_tunnel_sock_cfg *cfg)
{
@@ -91,7 +83,7 @@ void setup_udp_tunnel_sock(struct net *net, struct sock *sk,
udp_tunnel_update_gro_rcv(sk, true);
- if (!sk->sk_dport && !sk->sk_bound_dev_if && sk_saddr_any(sk) &&
+ if (!sk->sk_dport && !sk->sk_bound_dev_if && inet_rcv_saddr_any(sk) &&
sk->sk_kern_sock)
udp_tunnel_update_gro_lookup(net, sk, true);
}
base-commit: 7ccc5e05043b1bb84326b19a2b05938d8f7a2ae6
--
2.56.1
reply other threads:[~2026-11-16 20:12 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116200854.3799498-1-antonio@mandelbit.com \
--to=antonio@mandelbit.com \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@kernel.org \
--cc=horms@kernel.org \
--cc=idosch@nvidia.com \
--cc=kuba@kernel.org \
--cc=kuniyu@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=ncardwell@google.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®