From: Vitor Soares <ivitro@gmail.com>
To: Jeff Johnson <jjohnson@kernel.org>
Cc: Vitor Soares <vitor.soares@toradex.com>,
linux-wireless@vger.kernel.org, ath12k@lists.infradead.org,
linux-kernel@vger.kernel.org,
Nithyanantham Paramasivam
<nithyanantham.paramasivam@oss.qualcomm.com>,
Vasanthakumar Thiagarajan
<vasanthakumar.thiagarajan@oss.qualcomm.com>
Subject: [PATCH ath-current] wifi: ath12k: report TX status for broadcast and multicast frames
Date: Mon, 16 Nov 2026 23:02:49 +0000 [thread overview]
Message-ID: <20261116230250.369383-2-ivitro@gmail.com> (raw)
From: Vitor Soares <vitor.soares@toradex.com>
In AP mode, once a station is associated, broadcast and multicast frames
sent by the AP log:
ath12k_wifi7_pci 0003:01:00.0: dp_tx: failed to find the peer with peer_id 2
These frames complete against the AP's own peer. That peer has no
station, and since commit 981050b918fc ("wifi: ath12k: Fix TX status
reporting to mac80211 when offload is enabled") a missing station is
treated as a missing peer: the frame is dropped and an error is logged.
Before that commit, the TX status of these frames was reported without a
station.
Report the TX status without a station when the peer has none, and add
rate information only when a station is present. Only drop the frame
when the peer is not found, and log that case at debug level, as the
HTT completion path does.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
Fixes: 981050b918fc ("wifi: ath12k: Fix TX status reporting to mac80211 when offload is enabled")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
This conflicts with c752394249f8 ("wifi: ath12k: store station pointer
only in dp_peer") in ath-next; the resolution uses
ath12k_dp_link_peer_get_sta(peer) in place of peer->sta.
drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c | 23 +++++++++++--------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c b/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c
index 41abf1865702..794d85d9dbaf 100644
--- a/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/wifi7/dp_tx.c
@@ -856,24 +856,27 @@ static void ath12k_wifi7_dp_tx_complete_msdu(struct ath12k_pdev_dp *dp_pdev,
ath12k_wifi7_dp_tx_update_txcompl(dp_pdev, ts);
peer = ath12k_dp_link_peer_find_by_peerid(dp_pdev, ts->peer_id);
- if (!peer || !peer->sta) {
- ath12k_err(ab,
+ if (!peer) {
+ ath12k_dbg(ab, ATH12K_DBG_DATA,
"dp_tx: failed to find the peer with peer_id %d\n",
ts->peer_id);
ieee80211_free_txskb(ath12k_pdev_dp_to_hw(dp_pdev), msdu);
goto exit;
}
- status.sta = peer->sta;
- status.info = info;
- status.skb = msdu;
- rate = peer->last_txrate;
+ if (peer->sta) {
+ status.sta = peer->sta;
+ rate = peer->last_txrate;
- status_rate.rate_idx = rate;
- status_rate.try_count = 1;
+ status_rate.rate_idx = rate;
+ status_rate.try_count = 1;
- status.rates = &status_rate;
- status.n_rates = 1;
+ status.rates = &status_rate;
+ status.n_rates = 1;
+ }
+
+ status.info = info;
+ status.skb = msdu;
ieee80211_tx_status_ext(ath12k_pdev_dp_to_hw(dp_pdev), &status);
exit:
--
2.53.0
reply other threads:[~2026-11-16 23:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116230250.369383-2-ivitro@gmail.com \
--to=ivitro@gmail.com \
--cc=ath12k@lists.infradead.org \
--cc=jjohnson@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=nithyanantham.paramasivam@oss.qualcomm.com \
--cc=vasanthakumar.thiagarajan@oss.qualcomm.com \
--cc=vitor.soares@toradex.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®