From: yy-Local-LLM via B4 Relay <devnull+yogo.0917.sabu.gmail.com@kernel.org>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Thomas Gleixner <tglx@kernel.org>, Radu Rendec <radu@rendec.net>,
Ulf Hansson <ulfh@kernel.org>,
Daniel Lezcano <daniel.lezcano@kernel.org>,
Adrian Hunter <adrian.hunter@intel.com>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Russell King <linux@armlinux.org.uk>,
Arnd Bergmann <arnd@arndb.de>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Linus Walleij <linusw@kernel.org>,
Drew Fustini <fustini@kernel.org>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
linux-mmc@vger.kernel.org, linux-doc@vger.kernel.org,
soc@lists.linux.dev
Subject: [PATCH RFC 4/6] Input: add polled SiRF AT550 resistive touch support
Date: Tue, 17 Nov 2026 22:06:54 +0900 [thread overview]
Message-ID: <20261117-at550-rfc-v1-v1-4-5879573cb825@gmail.com> (raw)
In-Reply-To: <20261117-at550-rfc-v1-v1-0-5879573cb825@gmail.com>
From: yy-Local-LLM <yogo.0917.sabu@gmail.com>
Report raw ABS_X/ABS_Y and BTN_TOUCH using the input polling framework.
Preserve the firmware settling settings and reject streaming/AUX
ownership. Use standard touchscreen axis properties; keep affine
calibration in userspace. Polling is the initial supported acquisition
mode.
Signed-off-by: yy-Local-LLM <yogo.0917.sabu@gmail.com>
---
MAINTAINERS | 1 +
drivers/input/touchscreen/Kconfig | 10 ++++
drivers/input/touchscreen/Makefile | 2 +
drivers/input/touchscreen/at550-ts.c | 108 +++++++++++++++++++++++++++++++++++
4 files changed, 121 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 3fea2160a..441492230 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25856,6 +25856,7 @@ F: Documentation/devicetree/bindings/interrupt-controller/sirf,at550-intc.yaml
F: Documentation/devicetree/bindings/mmc/sirf,at550-sdhci.yaml
F: Documentation/devicetree/bindings/timer/sirf,at550-timer.yaml
F: drivers/clocksource/timer-at550.c
+F: drivers/input/touchscreen/at550-ts.c
F: drivers/irqchip/irq-at550.c
SIS 190 ETHERNET DRIVER
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 9b9ae8ac3..e68af1dd6 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1414,4 +1414,14 @@ config TOUCHSCREEN_HIMAX_HX83112B
To compile this driver as a module, choose M here: the
module will be called himax_hx83112b.
+config TOUCHSCREEN_AT550
+ tristate "SiRF AT550 resistive touchscreen"
+ depends on OF && HAS_IOMEM
+ help
+ Say Y to enable polled coordinate acquisition on the AT550.
+ Coordinates and pen state are exposed through the input subsystem.
+ Firmware must initialize the touchscreen peripheral clock.
+ Board-specific affine calibration belongs in userspace.
+ To build as a module, choose M; it will be called at550-ts.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index bfd9de833..6b8d09601 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -119,3 +119,5 @@ obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
obj-$(CONFIG_TOUCHSCREEN_IQS7211) += iqs7211.o
obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o
obj-$(CONFIG_TOUCHSCREEN_HIMAX_HX83112B) += himax_hx83112b.o
+
+obj-$(CONFIG_TOUCHSCREEN_AT550) += at550-ts.o
diff --git a/drivers/input/touchscreen/at550-ts.c b/drivers/input/touchscreen/at550-ts.c
new file mode 100644
index 000000000..0a208f4a9
--- /dev/null
+++ b/drivers/input/touchscreen/at550-ts.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* SiRF AT550 coordinate acquisition. Layout cross-checked with AT551 draft. */
+#include <linux/bitfield.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#define AT550_CTRL1 0x00
+#define AT550_CTRL2 0x04
+#define AT550_INTR 0x08
+#define AT550_COORD 0x0c
+#define AT550_STREAM 0x44
+#define AT550_DOWN BIT(31)
+#define AT550_VALID (BIT(29) | BIT(30))
+struct at550_ts {
+ void __iomem *base;
+ struct touchscreen_properties prop;
+ u32 ctrl1;
+ u32 ctrl2;
+};
+static void at550_ts_poll(struct input_dev *input)
+{
+ struct at550_ts *ts = input_get_drvdata(input);
+ u32 data = readl(ts->base + AT550_COORD);
+
+ if (!(data & AT550_DOWN)) {
+ input_report_key(input, BTN_TOUCH, 0);
+ input_sync(input);
+ return;
+ }
+ if ((data & AT550_VALID) != AT550_VALID)
+ return;
+ touchscreen_report_pos(input, &ts->prop, data & GENMASK(11, 0),
+ (data >> 12) & GENMASK(11, 0), false);
+ input_report_key(input, BTN_TOUCH, 1);
+ input_sync(input);
+}
+static int at550_ts_open(struct input_dev *input)
+{
+ struct at550_ts *ts = input_get_drvdata(input);
+
+ /* Polling keeps the interrupt sources disabled. Preserve CE settling. */
+ writel(3, ts->base + AT550_INTR);
+ writel(ts->ctrl2 | GENMASK(15, 14), ts->base + AT550_CTRL2);
+ writel((ts->ctrl1 & GENMASK(7, 4)) | BIT(11) | BIT(10),
+ ts->base + AT550_CTRL1);
+ return 0;
+}
+static void at550_ts_close(struct input_dev *input)
+{
+ struct at550_ts *ts = input_get_drvdata(input);
+
+ writel(3, ts->base + AT550_INTR);
+ writel(ts->ctrl1, ts->base + AT550_CTRL1);
+ writel(ts->ctrl2, ts->base + AT550_CTRL2);
+}
+static int at550_ts_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct at550_ts *ts;
+ struct input_dev *input;
+ int ret;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+ ts->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ts->base))
+ return PTR_ERR(ts->base);
+ ts->ctrl1 = readl(ts->base + AT550_CTRL1);
+ ts->ctrl2 = readl(ts->base + AT550_CTRL2);
+ if ((ts->ctrl1 & ~0xffffU) || (ts->ctrl2 & ~0xc2ffU) ||
+ readl(ts->base + AT550_STREAM))
+ return dev_err_probe(dev, -ENODEV, "unexpected TSC state\n");
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+ input->name = "SiRF AT550 touchscreen";
+ input->id.bustype = BUS_HOST;
+ input->open = at550_ts_open;
+ input->close = at550_ts_close;
+ input_set_drvdata(input, ts);
+ input_set_capability(input, EV_KEY, BTN_TOUCH);
+ input_set_abs_params(input, ABS_X, 0, 4095, 2, 0);
+ input_set_abs_params(input, ABS_Y, 0, 4095, 2, 0);
+ touchscreen_parse_properties(input, false, &ts->prop);
+ ret = input_setup_polling(input, at550_ts_poll);
+ if (ret)
+ return ret;
+ input_set_poll_interval(input, 10);
+ return input_register_device(input);
+}
+static const struct of_device_id at550_ts_of_match[] = {
+ { .compatible = "sirf,at550-ts" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, at550_ts_of_match);
+static struct platform_driver at550_ts_driver = {
+ .probe = at550_ts_probe,
+ .driver = {
+ .name = "at550-ts",
+ .of_match_table = at550_ts_of_match,
+ },
+};
+module_platform_driver(at550_ts_driver);
+MODULE_DESCRIPTION("SiRF AT550 resistive touchscreen");
+MODULE_LICENSE("GPL");
--
2.56.0
next prev parent reply other threads:[~2026-11-17 13:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 13:06 [PATCH RFC 0/6] SiRF AT550 / YPL514si initial RAM-boot platform support yy-Local-LLM via B4 Relay
2026-11-17 13:06 ` [PATCH RFC 1/6] dt-bindings: add SiRF AT550 and Yupiteru YPL514si descriptions yy-Local-LLM via B4 Relay
2026-11-17 13:06 ` [PATCH RFC 2/6] irqchip: add the SiRF AT550 interrupt controller yy-Local-LLM via B4 Relay
2026-11-17 13:06 ` [PATCH RFC 3/6] clocksource: add the SiRF AT550 counter and match timer yy-Local-LLM via B4 Relay
2026-11-17 13:06 ` yy-Local-LLM via B4 Relay [this message]
2026-11-17 13:06 ` [PATCH RFC 5/6] mmc: sdhci: add SiRF AT550 programmed-I/O support yy-Local-LLM via B4 Relay
2026-11-17 13:06 ` [PATCH RFC 6/6] ARM: add the SiRF AT550 platform and YPL514si board yy-Local-LLM via B4 Relay
2026-11-17 13:17 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117-at550-rfc-v1-v1-4-5879573cb825@gmail.com \
--to=devnull+yogo.0917.sabu.gmail.com@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=alexandre.belloni@bootlin.com \
--cc=arnd@arndb.de \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=daniel.lezcano@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=fustini@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=radu@rendec.net \
--cc=rdunlap@infradead.org \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=soc@lists.linux.dev \
--cc=tglx@kernel.org \
--cc=ulfh@kernel.org \
--cc=yogo.0917.sabu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®