From: Fil Dunsky via B4 Relay <devnull+filipp.dunsky.gmail.com@kernel.org>
To: Thomas Gleixner <tglx@kernel.org>, Radu Rendec <radu@rendec.net>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Fil Dunsky <filipp.dunsky@gmail.com>
Subject: [PATCH v4 0/2] irqchip: Add Cortina Systems CS75xx peripheral interrupt controller
Date: Tue, 17 Nov 2026 23:29:22 +0300 [thread overview]
Message-ID: <20261117-cs75xx-intc-v4-0-0a678f35e5f3@gmail.com> (raw)
The timers, GPIO banks, I2C, MDIO, SPI and a few other low speed
peripherals of the Cortina Systems CS75xx ("Goldengate G2") SoCs share
one GIC interrupt. This series adds the binding and a chained driver for
the small controller in the peripheral register block that reports the
level of these 15 sources and masks them; each source is acknowledged in
its peripheral.
There is a second status/enable pair right behind it whose purpose I do
not know; it is not described.
The driver used to be part of a series with the GPIO, I2C and watchdog
drivers and the device tree changes. That series is now split per
subsystem: the driver builds with COMPILE_TEST and does not depend on
the platform series [1], which is under review separately. The device
tree nodes will follow with the other CS75xx dts changes once the
platform is merged.
There is no public documentation; the register layout comes from the GPL
vendor kernels and was checked on a Securifi Almond+ (CS7542), where the
GPIO and I2C interrupts of the board are delivered through this
controller.
[1] https://lore.kernel.org/all/20261114-b4-cs75xx-v7-0-8f17f38821b4@gmail.com/
---
Changes in v4:
- rebase on v7.4-rc1; update the platform reference to v7
- split out of "Cortina Systems CS75xx: interrupt controller, GPIO, I2C
and TWD watchdog" so that each driver can go through its own tree; no
longer based on the platform series
- declare the variables of the chained handler from the longest to the
shortest line
- do not wrap lines that fit in 100 columns (Thomas)
- collect Reviewed-by tags
- Link to v3: https://patch.msgid.link/20261013-b4-cs75xx-s2-v3-0-181bb0d23f4c@gmail.com
Changes in v3:
- rebase on v6 of the platform series
- Link to v2: https://patch.msgid.link/20261013-b4-cs75xx-s2-v2-0-94f8c0a90cda@gmail.com
Changes in v2:
- rebase on v5 of the platform series
- Link to v1: https://patch.msgid.link/20261012-b4-cs75xx-s2-v1-0-8a7641b7b79c@gmail.com
To: Thomas Gleixner <tglx@kernel.org>
To: Radu Rendec <radu@rendec.net>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
---
Fil Dunsky (2):
dt-bindings: interrupt-controller: Add Cortina Systems CS7542 peripheral interrupt controller
irqchip: Add Cortina Systems CS75xx peripheral interrupt controller
.../interrupt-controller/cortina,cs7542-intc.yaml | 57 ++++++++++++
drivers/irqchip/Kconfig | 12 +++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-cs75xx.c | 100 +++++++++++++++++++++
4 files changed, 170 insertions(+)
---
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
change-id: 20261015-cs75xx-intc-b422801c7a5d
Best regards,
--
Fil Dunsky <filipp.dunsky@gmail.com>
next reply other threads:[~2026-11-17 20:29 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 20:29 Fil Dunsky via B4 Relay [this message]
2026-11-17 20:29 ` [PATCH v4 1/2] dt-bindings: interrupt-controller: Add Cortina Systems CS7542 " Fil Dunsky via B4 Relay
2026-11-17 20:29 ` [PATCH v4 2/2] irqchip: Add Cortina Systems CS75xx " Fil Dunsky via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117-cs75xx-intc-v4-0-0a678f35e5f3@gmail.com \
--to=devnull+filipp.dunsky.gmail.com@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=filipp.dunsky@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=radu@rendec.net \
--cc=robh@kernel.org \
--cc=tglx@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®