mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Luna Hart via B4 Relay <devnull+lhart.opensource.witekio.com@kernel.org>
To: Guenter Roeck <linux@roeck-us.net>, Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Jonathan Corbet <corbet@lwn.net>,
	 Shuah Khan <skhan@linuxfoundation.org>,
	 Randy Dunlap <rdunlap@infradead.org>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	"Flaviu Nistor" <flaviu.nistor@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	"Luna Hart" <lhart.opensource@witekio.com>
Subject: [PATCH v2 1/2] dt-bindings: hwmon: Add TI TPS389006/TPS389008
Date: Tue, 17 Nov 2026 15:45:35 -0800	[thread overview]
Message-ID: <20261117-lhart-dev-tps38900x-v2-1-e5730523d3ee@witekio.com> (raw)
In-Reply-To: <20261117-lhart-dev-tps38900x-v2-0-e5730523d3ee@witekio.com>

From: Luna Hart <lhart.opensource@witekio.com>

Add a binding for the TI TPS389006 and TPS389008 I2C voltage
supervisors and monitors, which provide 6 and 8 voltage inputs
respectively. Each input may be described by an optional child node,
containing additional properties including the label and voltage
monitoring range. Inputs that are not connected can be marked with
status set to "disabled".

Based on an earlier binding by Flaviu Nistor.

Signed-off-by: Luna Hart <lhart.opensource@witekio.com>
---
 .../devicetree/bindings/hwmon/ti,tps389006.yaml    | 114 +++++++++++++++++++++
 1 file changed, 114 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps389006.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps389006.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..2a26f6623adf06d1df38d5bc3683b5d2e06f3c0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps389006.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tps389006.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS389006/TPS389008 voltage supervisor and monitor
+
+maintainers:
+  - Luna Hart <lhart.opensource@witekio.com>
+
+description: |
+  Voltage supervisor and monitor from TI (TPS389006, TPS389008) on I2C bus.
+
+  Datasheets:
+    https://www.ti.com/lit/ds/symlink/tps389006.pdf
+    https://www.ti.com/lit/ds/symlink/tps389006-q1.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tps389006
+      - ti,tps389008
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: NIRQ fault interrupt output (active low).
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-7]$":
+    description:
+      A monitored input. Inputs that are not connected can be marked with
+      status set to "disabled".
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Input index, 0 for MON1 up to 7 for MON8.
+        enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+      label:
+        description: Name of the input source.
+
+      ti,vrange-multiplier:
+        description:
+          Voltage monitoring range of the input. 1 selects 0.2V to 1.475V in
+          5mV steps, 4 selects 0.8V to 5.5V in 20mV steps. If absent, the
+          range programmed in the device is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 1, 4 ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: ti,tps389006
+    then:
+      patternProperties:
+        "^channel@[67]$": false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        voltage-monitor@30 {
+            compatible = "ti,tps389008";
+            reg = <0x30>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0x0>;
+                label = "input0";
+                ti,vrange-multiplier = <4>;
+            };
+
+            channel@1 {
+                reg = <0x1>;
+                label = "input1";
+                ti,vrange-multiplier = <1>;
+            };
+
+            channel@7 {
+                reg = <0x7>;
+
+                status = "disabled";
+            };
+        };
+    };

-- 
2.47.3



  reply	other threads:[~2026-11-17 23:45 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 23:45 [PATCH v2 0/2] hwmon: Add support for " Luna Hart via B4 Relay
2026-11-17 23:45 ` Luna Hart via B4 Relay [this message]
2026-11-18 18:03   ` [PATCH v2 1/2] dt-bindings: hwmon: Add " Conor Dooley
2026-11-17 23:45 ` [PATCH v2 2/2] hwmon: (tps38900x) Add driver for " Luna Hart via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117-lhart-dev-tps38900x-v2-1-e5730523d3ee@witekio.com \
    --to=devnull+lhart.opensource.witekio.com@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=flaviu.nistor@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=lhart.opensource@witekio.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=rdunlap@infradead.org \
    --cc=robh@kernel.org \
    --cc=skhan@linuxfoundation.org \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®