From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=pass header.oldest-pass=0 smtp.remote-ip=40.107.75.119 ARC-Seal: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=pass; t=1794881834; b=VLE4gDUyY3ObmojUsa6fl4K7KvOw413dJ3VLCNB7OSqG8uZ3TrETtCQ711uT4ubHUO8r utbxlPOAcdzbXOBncBTgZSS79a5IoYtn5LjXhIIsD0VzB3tdSJrtLi/OaQ/Ei34hASO7W 0Yju2MhIMTjndo+G6ts/I8F4ofkCufknuZ/HGv0DUIz5oLYg54VmWEZP5bLsM7ZKgJXZn 87h0tU2KJafafvO/0rkZVElglMNZBevgzVfkb+CIzotmiuy381G6dG0yKrjrii1hTvVes YleBBNLzPUhJb6z+HQfUeVjn2VGMYHvPiu8C0TXIrVIx2ynKfwdDkg+bru1x/SpvCgA== ARC-Message-Signature: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1794881834; h=DMARC-Filter:Received:Received:X-MS-Exchange-Authentication-Results: Received-SPF:Received:Received:From:To:Cc:Subject:Date:Message-ID: X-Mailer:In-Reply-To:References:MIME-Version: Content-Transfer-Encoding:X-EOPAttributedMessage: X-MS-PublicTrafficType:X-MS-TrafficTypeDiagnostic:Content-Type: X-MS-Office365-Filtering-Correlation-Id:X-MS-Exchange-SenderADCheck: X-MS-Exchange-AntiSpam-Relay:X-Microsoft-Antispam: X-Microsoft-Antispam-Message-Info:X-Forefront-Antispam-Report: X-MS-Exchange-AntiSpam-MessageData-ChunkCount: X-MS-Exchange-AntiSpam-MessageData-0:X-OriginatorOrg: X-MS-Exchange-CrossTenant-OriginalArrivalTime: X-MS-Exchange-CrossTenant-Network-Message-Id: X-MS-Exchange-CrossTenant-Id: X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: X-MS-Exchange-CrossTenant-AuthSource:X-MS-Exchange-CrossTenant-AuthAs: X-MS-Exchange-CrossTenant-FromEntityHeader: X-MS-Exchange-Transport-CrossTenantHeadersStamped; bh=hsGlN4jn9fzyuiuenNXTReaMoZrvtstcoqbRJ+k85y8=; b=bmp2eVoAX0YpdIeChsb8V8woxCFzaN/yTS6/TSeqp6LyQiYMJyBSlwtPNXeX8GWBNYeS m53fF7yQF0XfCBcNvQoqmLFeK9Q4tlnqkIVwMLKjvUg8DlQKRP7AuQhUQvMPdFaEFfzZ1 f7gfenYW3jI3K9LJBTskJ8D29S9UYH9/oIbPsaiOD+JA+CHF7CdXgiQ0UsivAxFDx26VU H7GCoF5o9PxNZzPY1MywMlhZd29Fd0zv54uDBiscTiP7XCvr2/CA6OpMWn/6popOd8r76 aIU/IV3r8BnkbkxPKMSFR03EltafHwZX25j4c6CkhurhMm6FHZOm525EUCtfgoFa7iA== ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=none header.from=cixtech.com; spf=pass smtp.mailfrom=cixtech.com; arc=pass header.oldest-pass=0 smtp.remote-ip=40.107.75.119 Received: from OS8PR02CU002.outbound.protection.outlook.com (mail-japanwestazon11022119.outbound.protection.outlook.com [40.107.75.119]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (secp384r1) server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5ECE3606A323; Tue, 17 Nov 2026 02:17:13 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 5ECE3606A323 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=cixtech.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=cixtech.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=j4BeY+E9De0OAYdQIS4ef2MuS8JgJoHQng90/MykonWT3Qo8RCgEXjKeirD9Huq9TbwDLu32Bqh5kbQPg7xqbr3bot+xIQPaeiWn/uKzjAvoaab6Nt4MhGLt6bnkevlM1yWHZVcdH1OepQnSwN9V/k1iEHfqqjYk78T1FofqGY9aZxg3YeDbYoNAxv/t1Q6qA71HawV9ivqzFviyrrbBKcBMMpWoZGtW5d0JMaOT78kraQnIaPRf+UnoBsj9R4H9Ex2f1tGcWph7T8OPcq0MIRm2BMZAgOG6T/zUUcxyWxVxnOg88zXLZCKONC4YW8Us0xaQi3lAlsYV71aT5y1/fQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=hsGlN4jn9fzyuiuenNXTReaMoZrvtstcoqbRJ+k85y8=; b=a0P+WbPa1Gn6vkBdekrqjotmY8cyhriXDgAn8O49GB/RrWEZ6BDoDEJjb9QCt0vtynpGgpz8eCHVPMlfr2zGbhxYJ1ypM56b+q4oRbpM59P0sQd9ByERoNe85EsDlw9DAFMcd4l15yK8HNUob4GWj2TvtruKS+slfg1on5/fWY6Bt+w9HyXTWFD9jI/k6DJ9QSUmKuQlvWJPqyScJpR2yoAVa/ZRNfQUa+RY5B+A7b67Zw8Up9ImM55ACcENqkkA/9EmThG2mEO0yeP6cY1Nyi2sEjKaKNFPzNKY09LU4mG+KnuZCBFUq0asXHb9PC9NrQwe0y4F39EFcoUPHJKhLw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 222.71.101.198) smtp.rcpttodomain=cadence.com smtp.mailfrom=cixtech.com; dmarc=bestguesspass action=none header.from=cixtech.com; dkim=none (message not signed); arc=none (0) Received: from PS2PR02CA0068.apcprd02.prod.outlook.com (2603:1096:300:5a::32) by SEZPR06MB7292.apcprd06.prod.outlook.com (2603:1096:101:251::14) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.615.10; Tue, 17 Nov 2026 02:17:09 +0000 Received: from TY2PEPF0000AB84.apcprd03.prod.outlook.com (2603:1096:300:5a:cafe::94) by PS2PR02CA0068.outlook.office365.com (2603:1096:300:5a::32) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.21.615.14 via Frontend Transport; Tue, 17 Nov 2026 02:17:09 +0000 X-MS-Exchange-Authentication-Results: mx.microsoft.com 1; spf=pass (sender IP is 222.71.101.198) smtp.mailfrom=cixtech.com; dkim=none (message not signed) header.d=none;dmarc=bestguesspass action=none header.from=cixtech.com; Received-SPF: Pass (protection.outlook.com: domain of cixtech.com designates 222.71.101.198 as permitted sender) receiver=protection.outlook.com; client-ip=222.71.101.198; helo=smtprelay.cixcomputing.com; pr=C Received: from smtprelay.cixcomputing.com (222.71.101.198) by TY2PEPF0000AB84.mail.protection.outlook.com (10.167.253.9) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.615.4 via Frontend Transport; Tue, 17 Nov 2026 02:17:08 +0000 Received: from hongliang-System-Product-Name (unknown [172.20.64.180]) by smtprelay.cixcomputing.com (Postfix) with ESMTPSA id 4EE9640920E2; Tue, 17 Nov 2026 10:17:07 +0800 (CST) From: Hongliang Yang To: Greg Kroah-Hartman , Peter Chen , Pawel Laszczak , Roger Quadros , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Philipp Zabel , Gary Yang , Fugang Duan Cc: linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, cix-kernel-upstream@cixtech.com, Hongliang Yang Subject: [PATCH v9 2/2] usb: cdns3: Add CIX Sky1 glue driver Date: Tue, 17 Nov 2026 10:17:05 +0800 Message-ID: <20261117021705.2202892-3-hongliang.yang@cixtech.com> X-Mailer: git-send-email 2.54.0 In-Reply-To: <20261117021705.2202892-1-hongliang.yang@cixtech.com> References: <20261117021705.2202892-1-hongliang.yang@cixtech.com> X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: TY2PEPF0000AB84:EE_|SEZPR06MB7292:EE_ Content-Type: text/plain X-MS-Office365-Filtering-Correlation-Id: 5267d801-ec57-419e-8be4-08df4450e219 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|82310400026|1800799024|376014|36860700016|23010399003|7416014|22082099003|18002099003|921020|5023799004|56012099006|261009221227099003|261009220027099003|261102123227099003|261028144727099003|261021121427099003|261022105027099003|261022075727099003|261009223027099003|261026140227099003|261009223327099003|261009221727099003|261026121527099003|10067099003; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:222.71.101.198;CTRY:CN;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:smtprelay.cixcomputing.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230040)(82310400026)(1800799024)(376014)(36860700016)(23010399003)(7416014)(22082099003)(18002099003)(921020)(5023799004)(56012099006)(261009221227099003)(261009220027099003)(261102123227099003)(261028144727099003)(261021121427099003)(261022105027099003)(261022075727099003)(261009223027099003)(261026140227099003)(261009223327099003)(261009221727099003)(261026121527099003)(10067099003);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: agPo/1ScVC6tMAOVyZ+W1/Tmg4eJxYu/XysprQ74OMaQQfpA3eHoWN5AdCN2nbXFSwPemdHeiM8XyGIKqDiB+QhPQixZbUo3EiPOCc96rzsOBI2U6O02oVPE3fxI8CRW2S5RF9un9G0pW1mRxb09aB6/XQP1kjSZ50oHZ50KFK693w4X3u9qiHpIwSL15u2/x75GewrhPx5/X+BeyXJcoCaJSFShlecIg3G4PIaL3xYWwb0px/yZuHHyxcpSyAbtyEsQA7jW+KaL9CeN9i24ewItRbTEVEzXG3Vu693qYzuIPmSqXXmt+tTfPWSHWEG2WHxbFoXNJfTH/3wzWUU6u7tr6izKhJf9qFWm4WKIxZAfHsMgE/Vu3TRaHBcn8mQnJQz/uob/GrtZZTDqqsd+Y5gyFuXEfp4A3bUKCNUvKrBPvNtpQOz/sCK1fziOS7GR X-OriginatorOrg: cixtech.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 17 Nov 2026 02:17:08.7553 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: 5267d801-ec57-419e-8be4-08df4450e219 X-MS-Exchange-CrossTenant-Id: 0409f77a-e53d-4d23-943e-ccade7cb4811 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=0409f77a-e53d-4d23-943e-ccade7cb4811;Ip=[222.71.101.198];Helo=[smtprelay.cixcomputing.com] X-MS-Exchange-CrossTenant-AuthSource: TY2PEPF0000AB84.apcprd03.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: SEZPR06MB7292 Add a glue layer driver for the Cadence USBSSP controller integrated in the CIX Sky1 SoC. The driver manages the controller clocks, resets and the mode strap controls located in the Sky1 S5 system controller, and writes the AXI cache attributes and polls the AXI clock status of its own controller in the RCSU block. The register range is mapped with devm_ioremap() instead of devm_platform_ioremap_resource(): the two Type-A controllers share one RCSU block and their register ranges overlap, so reserving the region would make the second controller fail with -EBUSY. The offset of the AXI clock status register inside the range is taken from the per-compatible match data, as it differs between the Type-A and Type-C register blocks of the SoC. Signed-off-by: Hongliang Yang --- Changes in v9: - Track which clocks are enabled in a bitmap. clk_disable_unprepare() is then only called for clocks that were really prepared and enabled, so the counts cannot underflow after a partial enable or a failed system resume. - Clear PS_PME_En when wakeup is not requested, and put the controller back into D0 with PME wakeup off when D3 entry times out, instead of leaving it half suspended. - Gate the AXI and SOF clocks in system suspend only when the child device is not armed for wakeup and the controller really reached D3 (AXI_CLOCK_VALID cleared); in device or idle OTG role, and after a failed D3 entry, the register interface is still in use. - Require exactly one enabled "cdns,usb3" child node and stop freeing the child platform data after of_platform_populate(): it belongs to the child device, platform_device_release() frees it, so the driver leaked it when no child was created and could free it twice when two were. - select MFD_SYSCON, without which the syscon lookup stub makes probe fail with -ENOTSUPP. Changes in v8: - Read the two board properties with their vendor prefix: cix,ssp-disable and cix,u3-port-disable. - Do not assert the resets in system suspend/resume: that discards the OTG registers programmed by cdns_drd_init(), and nothing programs them again after the child device resumes. Only the clocks are gated. - Rewrite shutdown() to use the same teardown as remove(): depopulate the child while its clocks are still on, then assert the resets and disable the clocks. Whether to stay alive is decided on the child device, which owns the wakeup interrupt. - Allocate the child platform data with kzalloc() and free it if the children cannot be created: platform_device_release() kfree()s dev.platform_data, so it must not be devm-managed. - Only set PS_PME_En when wakeup is requested, and return -ETIMEDOUT when the controller does not reach D3 or does not leave it. - Drop the cached wakeup state: it went stale as soon as the child changed its own wakeup setting. Changes in v7: - Map one register range taken from the first reg entry, instead of two ranges selected with reg-names. - Map it with devm_ioremap() because the ranges of the two Type-A controllers overlap. - Take the offset of the AXI clock status register from the match data. Changes in v6: - Read the USB mode strap register offset and bit position from the cix,usb-syscon phandle arguments instead of relying on the usbN aliases and the undocumented id property. - Use dev_err_probe() in the probe error paths. - Drop the unused over-current GPIO handling and the unused dr_base and cdnsp_pdev fields. - Do not disable the clocks before they have been acquired. - Drop the redundant depends on USB_CDNS3 and fix the compatible name in the Kconfig help text. --- MAINTAINERS | 1 + drivers/usb/cdns3/Kconfig | 14 + drivers/usb/cdns3/Makefile | 1 + drivers/usb/cdns3/cdnsp-sky1.c | 748 +++++++++++++++++++++++++++++++++ drivers/usb/cdns3/cdnsp-sky1.h | 102 +++++ 5 files changed, 866 insertions(+) create mode 100644 drivers/usb/cdns3/cdnsp-sky1.c create mode 100644 drivers/usb/cdns3/cdnsp-sky1.h diff --git a/MAINTAINERS b/MAINTAINERS index 5144d02fc998..3c609d371306 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2906,6 +2906,7 @@ F: Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml F: Documentation/devicetree/bindings/usb/cix,sky1-usbssp.yaml F: arch/arm64/boot/dts/cix/ F: drivers/mailbox/cix-mailbox.c +F: drivers/usb/cdns3/cdnsp-sky1.* K: \bcix\b ARM/CLKDEV SUPPORT diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig index 39ad23d1ada8..fc810aef79f4 100644 --- a/drivers/usb/cdns3/Kconfig +++ b/drivers/usb/cdns3/Kconfig @@ -77,6 +77,20 @@ config USB_CDNSP_PCI If you choose to build this driver as module it will be dynamically linked and module will be called cdnsp-pci.ko +config USB_CDNSP_SKY1 + tristate "Cadence USB3 support on CIX Sky1 SoC platforms" + depends on ARCH_CIX || COMPILE_TEST + select MFD_SYSCON + default USB_CDNS3 + help + Glue driver for the Cadence USB dual-role controllers on CIX Sky1 + (device tree compatible cix,sky1-usbssp). It enables clocks and + resets from the SoC, then uses the shared cdns3 platform core + (cdns.ko). + + If built as a module, the module is named cdnsp-sky1.ko and must be + loaded after the cdns core module when both are loadable modules. + config USB_CDNS3_TI tristate "Cadence USB3 support on TI platforms" depends on ARCH_K3 || COMPILE_TEST diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile index b2e4ba6a49a3..ab813aaf9940 100644 --- a/drivers/usb/cdns3/Makefile +++ b/drivers/usb/cdns3/Makefile @@ -28,3 +28,4 @@ obj-$(CONFIG_USB_CDNSP_PCI) += cdnsp-pci.o obj-$(CONFIG_USB_CDNS3_TI) += cdns3-ti.o obj-$(CONFIG_USB_CDNS3_IMX) += cdns3-imx.o obj-$(CONFIG_USB_CDNS3_STARFIVE) += cdns3-starfive.o +obj-$(CONFIG_USB_CDNSP_SKY1) += cdnsp-sky1.o diff --git a/drivers/usb/cdns3/cdnsp-sky1.c b/drivers/usb/cdns3/cdnsp-sky1.c new file mode 100644 index 000000000000..7738ac7268de --- /dev/null +++ b/drivers/usb/cdns3/cdnsp-sky1.c @@ -0,0 +1,748 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * cdnsp-sky1.c - CIX Sky1 glue for Cadence USBSSP DRD controller + * + * Copyright (C) 2026 CIX Technology Group Co., Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "cdnsp-sky1.h" +#include "core.h" + +static const char *cix_usb_clk_names[CIX_USB_CLK_NUM] = { + "sof", + "axi", + "lpm", + "apb", +}; + +static int cdnsp_sky1_set_mode(struct device *dev, int mode) +{ + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + + return regmap_update_bits(data->usb_syscon, data->strap_offset, + GENMASK(data->strap_bit + 1, data->strap_bit), + mode << data->strap_bit); +} + +/** + * cdnsp_sky1_clk_enable() - enable the clocks selected by @mask + * @dev: Pointer to the device of platform_device + * @mask: Bit mask of the clocks to enable + * + * Enabling is tracked per clock, so a clock that is already on is not + * prepared and enabled a second time. + */ + +static int cdnsp_sky1_clk_enable(struct device *dev, unsigned long mask) +{ + int i, ret; + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + struct clk **cix_usb_clks = data->cix_usb_clks; + + for_each_set_bit(i, &mask, CIX_USB_CLK_NUM) { + if (test_and_set_bit(i, &data->clks_enabled)) + continue; + + ret = clk_prepare_enable(cix_usb_clks[i]); + if (ret) { + clear_bit(i, &data->clks_enabled); + dev_err(dev, "failed to enable clock %s: %d\n", + cix_usb_clk_names[i], ret); + return ret; + } + } + + return 0; +} + +/** + * cdnsp_sky1_clk_disable() - disable the clocks selected by @mask + * @dev: Pointer to the device of platform_device + * @mask: Bit mask of the clocks to disable + * + * Only clocks that are recorded as enabled are disabled, so the enable + * and prepare counts cannot underflow after a partial enable or resume. + */ + +static void cdnsp_sky1_clk_disable(struct device *dev, unsigned long mask) +{ + int i; + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + struct clk **cix_usb_clks = data->cix_usb_clks; + + for_each_set_bit(i, &mask, CIX_USB_CLK_NUM) { + if (!test_and_clear_bit(i, &data->clks_enabled)) + continue; + + clk_disable_unprepare(cix_usb_clks[i]); + } +} + +/** + * cdnsp_sky1_clk_enable_all() - get and enable all clocks of the controller + * @dev: Pointer to the device of platform_device + * + */ + +static int cdnsp_sky1_clk_enable_all(struct device *dev) +{ + int i, ret = 0; + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + struct clk **cix_usb_clks = data->cix_usb_clks; + + for (i = 0; i < CIX_USB_CLK_NUM; i++) { + cix_usb_clks[i] = devm_clk_get(dev, cix_usb_clk_names[i]); + if (IS_ERR(cix_usb_clks[i])) + return dev_err_probe(dev, PTR_ERR(cix_usb_clks[i]), + "could not get %s clock\n", + cix_usb_clk_names[i]); + } + + ret = cdnsp_sky1_clk_enable(dev, CIX_USB_CLK_ALL_MASK); + if (ret) + cdnsp_sky1_clk_disable(dev, CIX_USB_CLK_ALL_MASK); + + dev_dbg(dev, "enable sky1 USB clock done\n"); + return ret; +} + +/** + * cdnsp_sky1_clk_disable_all() - disable all clocks for usb controller + * @dev: Pointer to the device of platform_device + * + */ + +static void cdnsp_sky1_clk_disable_all(struct device *dev) +{ + cdnsp_sky1_clk_disable(dev, CIX_USB_CLK_ALL_MASK); +} + +/** + * cdnsp_sky1_clk_enable_resume() - enable the clocks that are turned + * off while suspend + * @dev: Pointer to the device of platform_device + * + */ + +static int cdnsp_sky1_clk_enable_resume(struct device *dev) +{ + return cdnsp_sky1_clk_enable(dev, CIX_USB_CLK_SUSPEND_MASK); +} + +/** + * cdnsp_sky1_clk_disable_suspend() - disable the clocks which are not + * needed when suspend + * @dev: Pointer to the device of platform_device + * + */ + +static void cdnsp_sky1_clk_disable_suspend(struct device *dev) +{ + cdnsp_sky1_clk_disable(dev, CIX_USB_CLK_SUSPEND_MASK); +} + +static u32 sky1_rcsu_read_status(struct cdnsp_sky1 *data) +{ + return readl(data->rcsu_base + data->rcsu_status_offset); +} + +static int sky1_rcsu_handshake(struct cdnsp_sky1 *data, u32 mask, u32 done, + u64 timeout_us) +{ + u32 result; + int ret; + + ret = readl_poll_timeout(data->rcsu_base + data->rcsu_status_offset, + result, + (result & mask) == done || + result == U32_MAX, + 10, timeout_us); + if (result == U32_MAX) /* card removed */ + return -ENODEV; + return ret; +} + +static int cdns_sky1_platform_suspend(struct device *dev, + bool suspend, bool wakeup) +{ + struct cdns *cdns = dev_get_drvdata(dev); + struct platform_device *xhci_dev = cdns->host_dev; + struct usb_hcd *hcd; + struct device *parent = cdns->dev->parent; + struct cdnsp_sky1 *data = dev_get_drvdata(parent); + u32 value; + int poll; + int ret = 0; + int count = 3; + + if (cdns->role != USB_ROLE_HOST) + return 0; + + if (!xhci_dev) { + dev_dbg(dev, "host controller has not been registered\n"); + return 0; + } + + hcd = dev_get_drvdata(&xhci_dev->dev); + if (!hcd) { + dev_dbg(dev, "host controller have not registered\n"); + return 0; + } + + if (suspend) { + while (count--) { + value = readl(hcd->regs + XECP_PM_PMCSR); + value &= ~PS_MASK; + value |= PS_D3; + if (wakeup) + value |= PS_PME_En; + else + value &= ~PS_PME_En; + writel(value, hcd->regs + XECP_PM_PMCSR); + /* After controller enters D3, disable AXI and SOF + * until AXI valid flag changes to 0. + */ + if (sky1_rcsu_handshake(data, AXI_CLOCK_VALID, 0, + 100ULL * 1000)) { + u32 ctst; + + ctst = sky1_rcsu_read_status(data); + dev_dbg(dev, "enter D3 failed, register value:%x\n", + ctst); + } else { + break; + } + } + if (count < 0) { + u32 ctst; + + ctst = sky1_rcsu_read_status(data); + dev_err(dev, "enter D3 failed after retries, register value:%x\n", + ctst); + /* + * The controller never left D0, so it is not suspended: + * bring it back to D0 explicitly and make sure PME + * wakeup stays off instead of leaving it half way. + */ + value &= ~PS_MASK; + value |= PS_D0; + value &= ~PS_PME_En; + writel(value, hcd->regs + XECP_PM_PMCSR); + ret = -ETIMEDOUT; + } + } else { + while (count--) { + value = readl(hcd->regs + XECP_PM_PMCSR); + value &= ~PS_MASK; + value |= PS_D0; + value &= ~PS_PME_En; + writel(value, hcd->regs + XECP_PM_PMCSR); + /* Wait power state back to D0 */ + poll = readl_poll_timeout(hcd->regs + XECP_PM_PMCSR, + value, + (value & PS_MASK) == 0, + 10, 100ULL * 1000); + if (poll) { + dev_dbg(dev, "exit D3 timeout, power state=0x%lx\n", + value & PS_MASK); + } else { + break; + } + } + if (count < 0) { + dev_err(dev, "exit D3 timeout after retries, power state=0x%lx\n", + value & PS_MASK); + ret = -ETIMEDOUT; + } + } + + return ret; +} + +static void cdnsp_sky1_configure_controller(struct cdnsp_sky1 *data) +{ + int clk; + int v0, v1, v2, v3; + u32 dev_cap, xhci_cap; + u32 val = 0; + + if (data->u3_disable) { + dev_dbg(data->dev, "disable u3 port\n"); + writel(D_XEC_CFG_3XPORT_MODE_VALUE, data->device_base + + D_XEC_CFG_3XPORT_MODE); + } + dev_cap = readl(data->device_base + D_XEC_AXI_CAP); + xhci_cap = readl(data->xhci_base + D_XEC_AXI_CAP); + writel(dev_cap | AXI_HALT, data->device_base + D_XEC_AXI_CAP); + writel(xhci_cap | AXI_HALT, data->xhci_base + D_XEC_AXI_CAP); + writel(data->axi_bmax_value, data->device_base + D_XEC_AXI_CTRL0); + writel(data->axi_bmax_value, data->xhci_base + D_XEC_AXI_CTRL0); + writel(dev_cap & ~AXI_HALT, data->device_base + D_XEC_AXI_CAP); + writel(xhci_cap & ~AXI_HALT, data->xhci_base + D_XEC_AXI_CAP); + clk = data->sof_clk_freq; + v0 = 25 * clk / 100000000; + v1 = clk / 10000; + v2 = clk / 10; + v3 = 125 * clk / 1000000; + writel(((v0 > 1) ? v0 - 1 : 1), data->device_base + + D_XEC_PRE_REG_250NS); + writel((unsigned int)((v1 / 100 > 1) > 0 ? (v1 / 100) - 1 : 1), + data->device_base + D_XEC_PRE_REG_1US); + writel((unsigned int)((v1 / 10 > 1) > 0 ? (v1 / 10) - 1 : 1), + data->device_base + D_XEC_PRE_REG_10US); + writel(((v1) > 1 ? v1 - 1 : 1), data->device_base + + D_XEC_PRE_REG_100US); + writel((unsigned int)(v3 > 1 ? v3 - 1 : 1), + data->device_base + D_XEC_PRE_REG_125US); + writel(((v2 / 100 > 1) ? (v2 / 100) - 1 : 1), data->device_base + + D_XEC_PRE_REG_1MS); + writel(((v2 / 10 > 1) ? (v2 / 10) - 1 : 1), data->device_base + + D_XEC_PRE_REG_10MS); + writel((v2 > 1 ? v2 - 1 : 1), data->device_base + + D_XEC_PRE_REG_100MS); + dev_dbg(data->dev, "readl:%x, %x ,%x, %x, %x, %x, %x, %x\n", + readl(data->device_base + D_XEC_PRE_REG_250NS), + readl(data->device_base + D_XEC_PRE_REG_1US), + readl(data->device_base + D_XEC_PRE_REG_10US), + readl(data->device_base + D_XEC_PRE_REG_100US), + readl(data->device_base + D_XEC_PRE_REG_125US), + readl(data->device_base + D_XEC_PRE_REG_1MS), + readl(data->device_base + D_XEC_PRE_REG_10MS), + readl(data->device_base + D_XEC_PRE_REG_100MS)); + clk = data->lpm_clk_freq; + v0 = 25 * clk / 100000000; + v1 = clk / 10000; + v2 = clk / 10; + v3 = 125 * clk / 1000000; + writel(((v0 > 1) ? v0 - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_250NS); + writel((unsigned int)((v1 / 100 > 1) > 0 ? (v1 / 100) - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_1US); + writel((unsigned int)((v1 / 10 > 1) > 0 ? (v1 / 10) - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_10US); + writel(((v1) > 1 ? v1 - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_100US); + writel((unsigned int)(v3 > 1 ? v3 - 1 : 1), + data->device_base + D_XEC_LPM_PRE_REG_125US); + writel(((v2 / 100 > 1) ? (v2 / 100) - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_1MS); + writel(((v2 / 10 > 1) ? (v2 / 10) - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_10MS); + writel((v2 > 1 ? v2 - 1 : 1), data->device_base + + D_XEC_LPM_PRE_REG_100MS); + v0 = readl(data->xhci_base + XEC_USBSSP_CHICKEN_BITS_3); + v0 &= ~(CFG_APB_TIMEOUT_PSLVERR_EN | CFG_APB_PSLVERR_EN); + writel(v0, data->xhci_base + XEC_USBSSP_CHICKEN_BITS_3); + if (data->u3_disable) { + dev_dbg(data->dev, "disable u3 port\n"); + writel(XEC_CFG_3XPORT_MODE_VALUE, data->xhci_base + + XEC_CFG_3XPORT_MODE); + } else if (data->ssp_disable) { + dev_dbg(data->dev, "disable ssp\n"); + v0 = readl(data->xhci_base + XEC_CFG_3XPORT_MODE); + writel(v0 & CFG_3XPORT_MODE_DIS_SSP, data->xhci_base + + XEC_CFG_3XPORT_MODE); + } + clk = data->sof_clk_freq; + v0 = 25 * clk / 100000000; + v1 = clk / 10000; + v2 = clk / 10; + v3 = 125 * clk / 1000000; + writel(((v0 > 1) ? v0 - 1 : 0), data->xhci_base + + XEC_PRE_REG_250NS); + writel((unsigned int)((v1 / 100 > 1) > 0 ? (v1 / 100) - 1 : 0), data->xhci_base + + XEC_PRE_REG_1US); + writel((unsigned int)((v1 / 10 > 1) > 0 ? (v1 / 10) - 1 : 0), data->xhci_base + + XEC_PRE_REG_10US); + writel(((v1) > 1 ? v1 - 1 : 0), data->xhci_base + + XEC_PRE_REG_100US); + writel((unsigned int)(v3 > 1 ? v3 - 1 : 0), + data->xhci_base + XEC_PRE_REG_125US); + writel(((v2 / 100 > 1) ? (v2 / 100) - 1 : 0), data->xhci_base + + XEC_PRE_REG_1MS); + writel(((v2 / 10 > 1) ? (v2 / 10) - 1 : 0), data->xhci_base + + XEC_PRE_REG_10MS); + writel((v2 > 1 ? v2 - 1 : 0), data->xhci_base + + XEC_PRE_REG_100MS); + clk = data->lpm_clk_freq; + v0 = 25 * clk / 100000000; + v1 = clk / 10000; + v2 = clk / 10; + v3 = 125 * clk / 1000000; + writel(((v0 > 1) ? v0 - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_250NS); + writel((unsigned int)((v1 / 100 > 1) > 0 ? (v1 / 100) - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_1US); + writel((unsigned int)((v1 / 10 > 1) > 0 ? (v1 / 10) - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_10US); + writel(((v1) > 1 ? v1 - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_100US); + writel((unsigned int)(v3 > 1 ? v3 - 1 : 0), + data->xhci_base + XEC_LPM_PRE_REG_125US); + writel(((v2 / 100 > 1) ? (v2 / 100) - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_1MS); + writel(((v2 / 10 > 1) ? (v2 / 10) - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_10MS); + writel((v2 > 1 ? v2 - 1 : 0), data->xhci_base + + XEC_LPM_PRE_REG_100MS); + val = readl(data->xhci_base + XEC_USBSSP_CLK_GATING_CTRL); + val |= HOST20_ACLK_GATING_DISABLE | HOST20_UTMI_GATING_DISABLE; + writel(val, data->xhci_base + XEC_USBSSP_CLK_GATING_CTRL); +} + +static int cdnsp_sky1_drd_init(struct cdnsp_sky1 *data) +{ + int ret = 0; + + reset_control_assert(data->reset); + reset_control_assert(data->preset); + ret = cdnsp_sky1_clk_enable_all(data->dev); + if (ret) + return ret; + writel(CIX_USB_AXI_WR_CACHE_VALUE, data->rcsu_base); + cdnsp_sky1_set_mode(data->dev, MODE_STRAP_OTG); + reset_control_deassert(data->preset); + cdnsp_sky1_configure_controller(data); + reset_control_deassert(data->reset); + return ret; +} + +static void __iomem *sky1_of_get_addr_by_name(struct device_node *parent, const char *name) +{ + void __iomem *addr = NULL; + struct device_node *node; + int index; + + for_each_child_of_node(parent, node) { + index = of_property_match_string(node, "reg-names", name); + if (index >= 0) { + addr = of_iomap(node, index); + of_node_put(node); + break; + } + } + + return addr; +} + +static void __iomem *sky1_get_addr_by_name(struct device *dev, const char *name) +{ + return sky1_of_get_addr_by_name(dev->of_node, name); +} + +static void sky1_put_addr(void __iomem *regs) +{ + if (regs) + iounmap(regs); +} + +struct sky1_usbssp_cfg { + unsigned int rcsu_status_offset; +}; + +/* Offset of STRAP_STATUS0, the AXI clock status register, from 0x91c0314. */ +static const struct sky1_usbssp_cfg sky1_usbssp_typea_cfg = { + .rcsu_status_offset = 0xec, +}; + +/* + * platform_device_release() frees the platform data of the device it is + * called for, while of_platform_populate() neither fails nor reports how many + * devices it created. The device tree therefore has to describe exactly one + * enabled core node: with none the platform data would leak, with two it + * would be freed twice. + */ +static int cdnsp_sky1_check_children(struct device *dev) +{ + struct device_node *node; + int count = 0; + + for_each_child_of_node(dev->of_node, node) { + if (of_device_is_available(node) && + of_device_is_compatible(node, "cdns,usb3")) + count++; + } + + if (count != 1) + return dev_err_probe(dev, -EINVAL, + "expected one enabled \"cdns,usb3\" child, found %d\n", + count); + + return 0; +} + +static int cdnsp_sky1_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct of_dev_auxdata cdns_sky1_auxdata[] = { + { .compatible = "cdns,usb3", }, + {}, + }; + const struct sky1_usbssp_cfg *cfg; + struct cdnsp_sky1 *data; + struct cdns3_platform_data *cdns_sky1_pdata; + struct resource *res; + unsigned int args[2]; + int ret = 0; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + cfg = of_device_get_match_data(dev); + if (!cfg) + return dev_err_probe(dev, -ENODEV, "unsupported device\n"); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return dev_err_probe(dev, -ENODEV, "missing register range\n"); + ret = cdnsp_sky1_check_children(dev); + if (ret) + return ret; + /* + * The two Type-A controllers share one RCSU block and their + * register ranges overlap, so the range is mapped without + * requesting it: request_mem_region() would make the second + * controller fail with -EBUSY. + */ + data->rcsu_base = devm_ioremap(dev, res->start, resource_size(res)); + if (!data->rcsu_base) + return dev_err_probe(dev, -ENOMEM, "failed to map registers\n"); + data->rcsu_status_offset = cfg->rcsu_status_offset; + data->reset = devm_reset_control_get_exclusive(&pdev->dev, "core"); + if (IS_ERR(data->reset)) + return dev_err_probe(dev, PTR_ERR(data->reset), + "failed to get core reset\n"); + data->preset = devm_reset_control_get_exclusive(&pdev->dev, "apb"); + if (IS_ERR(data->preset)) + return dev_err_probe(dev, PTR_ERR(data->preset), + "failed to get APB reset\n"); + platform_set_drvdata(pdev, data); + data->dev = dev; + data->usb_syscon = + syscon_regmap_lookup_by_phandle_args(node, "cix,usb-syscon", + 2, args); + if (IS_ERR(data->usb_syscon)) + return dev_err_probe(dev, PTR_ERR(data->usb_syscon), + "failed to get S5 system controller\n"); + data->strap_offset = args[0]; + data->strap_bit = args[1]; + data->u3_disable = device_property_read_bool(dev, "cix,u3-port-disable"); + data->ssp_disable = device_property_read_bool(dev, "cix,ssp-disable"); + data->sof_clk_freq = CIX_USB_CLK_8M; + data->lpm_clk_freq = CIX_USB_CLK_32K; + data->axi_bmax_value = AXI_BMAX_VALUE_DEFAULT; + data->xhci_base = sky1_get_addr_by_name(dev, "xhci"); + if (!data->xhci_base) { + ret = -ENODEV; + goto err_put_xhci; + } + data->device_base = sky1_get_addr_by_name(dev, "dev"); + if (!data->device_base) { + ret = -ENODEV; + goto err_put_addrs; + } + ret = cdnsp_sky1_drd_init(data); + if (ret == -ETIMEDOUT) + ret = -EPROBE_DEFER; + if (ret) { + /* + * drd_init() leaves the clocks disabled and the resets + * asserted on failure; only the address mappings are + * left to release. + */ + goto err_put_addrs; + } + /* + * platform_device_release() kfree()s dev.platform_data, so this + * buffer belongs to the child device once it is created. It cannot be + * devm-managed. cdnsp_sky1_check_children() guarantees that exactly one + * child takes it over, so it is not released here, not even on failure: + * a child that was created and then failed to register frees it on its + * own. + */ + cdns_sky1_pdata = kzalloc(sizeof(*cdns_sky1_pdata), GFP_KERNEL); + if (!cdns_sky1_pdata) { + ret = -ENOMEM; + goto err_quiesce; + } + cdns_sky1_pdata->platform_suspend = cdns_sky1_platform_suspend; + cdns_sky1_pdata->quirks = CDNS3_DEFAULT_PM_RUNTIME_ALLOW; + cdns_sky1_auxdata[0].platform_data = cdns_sky1_pdata; + ret = of_platform_populate(node, NULL, cdns_sky1_auxdata, dev); + if (ret) { + dev_err(dev, "failed to create children: %d\n", ret); + goto err_quiesce; + } + device_set_wakeup_capable(dev, true); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; + +err_quiesce: + reset_control_assert(data->reset); + reset_control_assert(data->preset); + cdnsp_sky1_clk_disable_all(dev); +err_put_addrs: + sky1_put_addr(data->device_base); +err_put_xhci: + sky1_put_addr(data->xhci_base); + return ret; +} + +static void cdnsp_sky1_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + + pm_runtime_get_sync(dev); + of_platform_depopulate(dev); + sky1_put_addr(data->xhci_base); + sky1_put_addr(data->device_base); + reset_control_assert(data->reset); + reset_control_assert(data->preset); + cdnsp_sky1_clk_disable_all(dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); +} + +static int cdnsp_sky1_find_cdns_dev(struct device *dev, void *data) +{ + struct device **cdns_dev = data; + + if (dev->of_node && of_device_is_compatible(dev->of_node, "cdns,usb3")) { + /* keep a reference: the pointer is used after the iteration */ + *cdns_dev = get_device(dev); + return 1; + } + return 0; +} + +/* + * The resets are left alone here. Asserting them throws away the OTG + * registers programmed by cdns_drd_init(), and nothing programs them again + * after the child device resumes, so the controller keeps its state across + * system suspend and only the clocks are gated. + */ +static int cdnsp_sky1_system_suspend(struct device *dev) +{ + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + struct device *cdns_dev = NULL; + + /* + * The wake-up interrupt and the host interrupt are the same interrupt, + * so gating the axi and sof clocks takes the port status change + * interrupt away. Keep the clocks running when the child device, which + * owns the interrupt, is armed for wakeup. + */ + device_for_each_child(dev, &cdns_dev, cdnsp_sky1_find_cdns_dev); + if (cdns_dev) { + bool wakeup = device_may_wakeup(cdns_dev); + + put_device(cdns_dev); + if (wakeup) + return 0; + } + + /* + * cdns_sky1_platform_suspend() only asks for D3 in host role, so in + * device or idle OTG role, and when the D3 entry timed out, the + * controller is still clocked and its register interface is in use. + * Gate the clocks only once AXI_CLOCK_VALID has dropped. + */ + if (sky1_rcsu_read_status(data) & AXI_CLOCK_VALID) + return 0; + + cdnsp_sky1_clk_disable_suspend(dev); + + return 0; +} + +static int cdnsp_sky1_system_resume(struct device *dev) +{ + return cdnsp_sky1_clk_enable_resume(dev); +} + +static const struct dev_pm_ops cdnsp_sky1_pm_ops = { + SYSTEM_SLEEP_PM_OPS(cdnsp_sky1_system_suspend, cdnsp_sky1_system_resume) +}; + +static const struct of_device_id cdns_sky1_of_match[] = { + { + .compatible = "cix,sky1-usbssp", + .data = &sky1_usbssp_typea_cfg, + }, + {} +}; +MODULE_DEVICE_TABLE(of, cdns_sky1_of_match); + +static void cdnsp_sky1_shutdown(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct cdnsp_sky1 *data = dev_get_drvdata(dev); + struct device *cdns_dev = NULL; + + /* + * The wakeup interrupt and the host interrupt are the same one, so + * the controller has to stay alive when wakeup is enabled on the + * child device, which is the one that owns the interrupt. + */ + device_for_each_child(dev, &cdns_dev, cdnsp_sky1_find_cdns_dev); + if (cdns_dev && device_may_wakeup(cdns_dev)) { + put_device(cdns_dev); + return; + } + + /* + * Same teardown as remove(): depopulate the child while its clocks + * are still on, so that its driver stops the controller and frees + * the interrupts before the resets and the clocks are taken away. + */ + pm_runtime_get_sync(dev); + of_platform_depopulate(dev); + reset_control_assert(data->reset); + reset_control_assert(data->preset); + cdnsp_sky1_clk_disable_all(dev); + pm_runtime_put_noidle(dev); + put_device(cdns_dev); +} + +static struct platform_driver cdnsp_sky1_driver = { + .probe = cdnsp_sky1_probe, + .remove = cdnsp_sky1_remove, + .shutdown = cdnsp_sky1_shutdown, + .driver = { + .name = "cdnsp-sky1", + .of_match_table = cdns_sky1_of_match, + .pm = pm_sleep_ptr(&cdnsp_sky1_pm_ops), + }, +}; + +module_platform_driver(cdnsp_sky1_driver); + +MODULE_ALIAS("platform:cdnsp-sky1"); +MODULE_DESCRIPTION("CIX Sky1 Cadence USBSSP DRD glue driver"); +MODULE_AUTHOR("Hongliang Yang "); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/cdns3/cdnsp-sky1.h b/drivers/usb/cdns3/cdnsp-sky1.h new file mode 100644 index 000000000000..d70019e2ba95 --- /dev/null +++ b/drivers/usb/cdns3/cdnsp-sky1.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _CDNSP_SKY1_H +#define _CDNSP_SKY1_H +#include +#include +#include + +#define MODE_STRAP_OTG 0 + +#define AXI_HALT BIT(31) +#define AXI_BMAX_VALUE_DEFAULT 0x7 + +#define D_XEC_CFG_3XPORT_MODE 0x2040 +#define D_XEC_AXI_CAP 0x2174 +#define D_XEC_AXI_CTRL0 0x217C +#define D_XEC_PRE_REG_250NS 0x21E8 +#define D_XEC_PRE_REG_1US 0x21EC +#define D_XEC_PRE_REG_10US 0x21F0 +#define D_XEC_PRE_REG_100US 0x21F4 +#define D_XEC_PRE_REG_125US 0x21F8 +#define D_XEC_PRE_REG_1MS 0x21FC +#define D_XEC_PRE_REG_10MS 0x2200 +#define D_XEC_PRE_REG_100MS 0x2204 +#define D_XEC_LPM_PRE_REG_250NS 0x2208 +#define D_XEC_LPM_PRE_REG_1US 0x220C +#define D_XEC_LPM_PRE_REG_10US 0x2210 +#define D_XEC_LPM_PRE_REG_100US 0x2214 +#define D_XEC_LPM_PRE_REG_125US 0x2218 +#define D_XEC_LPM_PRE_REG_1MS 0x221C +#define D_XEC_LPM_PRE_REG_10MS 0x2220 +#define D_XEC_LPM_PRE_REG_100MS 0x2224 + +#define XEC_CFG_3XPORT_MODE 0x2040 +#define XEC_PRE_REG_250NS 0x21E8 +#define XEC_PRE_REG_1US 0x21EC +#define XEC_PRE_REG_10US 0x21F0 +#define XEC_PRE_REG_100US 0x21F4 +#define XEC_PRE_REG_125US 0x21F8 +#define XEC_PRE_REG_1MS 0x21FC +#define XEC_PRE_REG_10MS 0x2200 +#define XEC_PRE_REG_100MS 0x2204 +#define XEC_LPM_PRE_REG_250NS 0x2208 +#define XEC_LPM_PRE_REG_1US 0x220C +#define XEC_LPM_PRE_REG_10US 0x2210 +#define XEC_LPM_PRE_REG_100US 0x2214 +#define XEC_LPM_PRE_REG_125US 0x2218 +#define XEC_LPM_PRE_REG_1MS 0x221C +#define XEC_LPM_PRE_REG_10MS 0x2220 +#define XEC_LPM_PRE_REG_100MS 0x2224 +#define XEC_USBSSP_CHICKEN_BITS_3 0x2230 +#define XEC_USBSSP_CLK_GATING_CTRL 0x2234 +#define XECP_PM_PMCSR 0x2240 + +/* XEC_USBSSP_CLK_GATING_CTRL */ +#define HOST20_ACLK_GATING_DISABLE BIT(4) +#define HOST20_UTMI_GATING_DISABLE BIT(5) + +/* XECP_PM_PMCSR */ +#define PS_MASK GENMASK(1, 0) +#define PS_D0 0 +#define PS_D3 3 +#define PS_PME_En BIT(8) + +#define D_XEC_CFG_3XPORT_MODE_VALUE 0xa0031e07 +#define XEC_CFG_3XPORT_MODE_VALUE 0xa0031e07 +#define CFG_3XPORT_MODE_DIS_SSP (~BIT(31)) + +#define CFG_APB_TIMEOUT_PSLVERR_EN BIT(22) +#define CFG_APB_PSLVERR_EN BIT(23) + +#define CIX_USB_CLK_NUM (4) +/* Clocks that are gated while the controller is suspended */ +#define CIX_USB_CLK_SUSPEND_MASK (BIT(0) | BIT(1)) +#define CIX_USB_CLK_ALL_MASK GENMASK(CIX_USB_CLK_NUM - 1, 0) +#define CIX_USB_AXI_WR_CACHE_VALUE 0x33 +#define CIX_USB_CLK_32K 32000 +#define CIX_USB_CLK_8M 8000000 + +#define AXI_CLOCK_VALID BIT(1) + +struct cdnsp_sky1 { + struct device *dev; + void __iomem *rcsu_base; + unsigned int rcsu_status_offset; + void __iomem *xhci_base; + void __iomem *device_base; + struct reset_control *reset; + struct reset_control *preset; + struct clk *cix_usb_clks[CIX_USB_CLK_NUM]; + unsigned long clks_enabled; + unsigned int strap_offset; + unsigned int strap_bit; + struct regmap *usb_syscon; + int lpm_clk_freq; + int sof_clk_freq; + bool u3_disable; + bool ssp_disable; + int axi_bmax_value; +}; + +#endif /* _CDNSP_SKY1_H */ -- 2.54.0