From: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
To: <vkoul@kernel.org>
Cc: <yung-chuan.liao@linux.intel.com>,
<pierre-louis.bossart@linux.dev>, <Basavaraj.Hiregoudar@amd.com>,
<Sunil-kumar.Dommati@amd.com>, <venkataprasad.potturu@amd.com>,
<Syed.SabaKareem@amd.com>, <Mario.Limonciello@amd.com>,
<Richard.Gong@amd.com>, <Poojitha.N@amd.com>, <lee@kernel.org>,
<linux-sound@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Subject: [PATCH v6 05/23] soundwire: amd: fix missing wake interrupt and group wake-arming calls in runtime suspend
Date: Tue, 17 Nov 2026 12:35:40 +0530 [thread overview]
Message-ID: <20261117070906.803139-6-Vijendar.Mukunda@amd.com> (raw)
In-Reply-To: <20261117070906.803139-1-Vijendar.Mukunda@amd.com>
In amd_suspend_runtime() POWER_OFF_MODE, amd_sdw_wake_enable() was called
before amd_deinit_sdw_manager(), causing the wake IRQ mask to be silently
overwritten.
amd_deinit_sdw_manager() calls amd_disable_sdw_interrupts() which writes
0x00 to ACP_SW_STATE_CHANGE_STATUS_MASK_8TO11, wiping
AMD_SDW_WAKE_INTR_MASK (BIT(16)) set by amd_sdw_wake_enable(). Move
amd_sdw_wake_enable() to after amd_deinit_sdw_manager() so the wake mask
is armed after the interrupt-disable sequence and cannot be clobbered.
Move amd_sdw_host_wake_enable() after amd_deinit_sdw_manager() as well,
grouping both wake-arming calls together after the interrupt-disable
sequence.
If amd_deinit_sdw_manager() fails (timeout waiting for ACP_SW_EN_STATUS),
the hardware is in an indeterminate state and wake IRQ delivery cannot be
expected to function; the early return before the wake-arming calls is
correct in this case.
Fixes: dcc48a73eae7 ("soundwire: amd: change the soundwire wake enable/disable sequence")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
---
drivers/soundwire/amd_manager.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/soundwire/amd_manager.c b/drivers/soundwire/amd_manager.c
index 28f5dbe131dc..3d60bea82792 100644
--- a/drivers/soundwire/amd_manager.c
+++ b/drivers/soundwire/amd_manager.c
@@ -1454,18 +1454,18 @@ static int __maybe_unused amd_suspend_runtime(struct device *dev)
if (ret)
return ret;
} else if (amd_manager->power_mode_mask & AMD_SDW_POWER_OFF_MODE) {
- amd_sdw_wake_enable(amd_manager, true);
- if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
- ret = amd_sdw_host_wake_enable(amd_manager, true);
- if (ret)
- return ret;
- }
ret = amd_sdw_clock_stop(amd_manager);
if (ret)
return ret;
ret = amd_deinit_sdw_manager(amd_manager);
if (ret)
return ret;
+ amd_sdw_wake_enable(amd_manager, true);
+ if (amd_manager->acp_rev >= ACP70_PCI_REV_ID) {
+ ret = amd_sdw_host_wake_enable(amd_manager, true);
+ if (ret)
+ return ret;
+ }
/*
* For ACP 7.0/7.1/7.2: disable OE only; keeper and schmen remain
* enabled unconditionally so that wake-capable devices can detect
--
2.53.0
next prev parent reply other threads:[~2026-11-17 7:10 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 7:05 [PATCH v6 00/23] soundwire: amd: SoundWire manager driver bug fixes Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 01/23] soundwire: amd: consolidate pad register macros into amd_init.h Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 02/23] soundwire: amd: program pad SCHMEN and OE control for ACP 7.0/7.1/7.2 Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 03/23] soundwire: amd: add pad ctrl helpers for D0/D3 PM transitions Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 04/23] soundwire: amd: track full pad teardown across suspend/resume Vijendar Mukunda
2026-11-17 7:05 ` Vijendar Mukunda [this message]
2026-11-17 7:05 ` [PATCH v6 06/23] soundwire: amd: fix IRQ thread dropping STATUS_0TO7 on simultaneous wake Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 07/23] soundwire: amd: remove STATUS_8TO11 clear from amd_sdw_process_wake_event() Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 08/23] soundwire: amd: fix missing wake interrupt for ACP6.3 in POWER_OFF suspend Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 09/23] soundwire: amd: fix SDW command timeout return value handling Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 10/23] soundwire: amd: cache ping slave status to avoid spurious disconnect on timeout Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 11/23] soundwire: amd: assert msg_lock is held in amd_sdw_read_ping_status() Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 12/23] soundwire: amd: fix work drain ordering in remove path Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 13/23] soundwire: amd: defer dev_set_drvdata() until after INIT_WORK() Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 14/23] soundwire: amd: pm_runtime guard in remove path Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 15/23] soundwire: amd: use interrupt_enabled flag to guard IRQ work scheduling Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 16/23] soundwire: amd: delay *sdw_ctx publication until after startup succeeds Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 17/23] soundwire: amd: propagate amd_init_sdw_manager() error on resume Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 18/23] soundwire: amd: drop amd_deinit_sdw_manager() in POWER_OFF suspend Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 19/23] soundwire: amd: replace >= ACP70 with explicit switch/case in PM paths Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 20/23] soundwire: amd: fix interrupt gate and work drain ordering in PM ops Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 21/23] soundwire: amd: check for NULL manager drvdata in sdw_amd_startup() Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 22/23] soundwire: amd: fix shared-register RMW race in amd_sdw_set_device_state() Vijendar Mukunda
2026-11-17 7:05 ` [PATCH v6 23/23] soundwire: amd: fix shared-register RMW race in amd_sdw_host_wake_enable() Vijendar Mukunda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117070906.803139-6-Vijendar.Mukunda@amd.com \
--to=vijendar.mukunda@amd.com \
--cc=Basavaraj.Hiregoudar@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Poojitha.N@amd.com \
--cc=Richard.Gong@amd.com \
--cc=Sunil-kumar.Dommati@amd.com \
--cc=Syed.SabaKareem@amd.com \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=pierre-louis.bossart@linux.dev \
--cc=venkataprasad.potturu@amd.com \
--cc=vkoul@kernel.org \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®