From: Karthik S <karthik.s@oss.qualcomm.com>
To: Bartosz Golaszewski <brgl@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Karthik S <karthik.s@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/3] pinctrl: qcom: Add QCS615 LPASS LPI pinctrl support
Date: Tue, 17 Nov 2026 13:20:57 +0530 [thread overview]
Message-ID: <20261117075100.272535-1-karthik.s@oss.qualcomm.com> (raw)
This series adds LPASS (Low Power Audio SubSystem) LPI (Low Power
Island) pinctrl support for Qualcomm QCS615 SoC.
The LPASS LPI TLMM is a dedicated pin controller for audio pins on
QCS615 which supports 32 GPIOs (gpio0-gpio31) with mux functions for
i2s1, i2s2, dmic1, dmic2 and spkr_i2s_mclk_a.
---
Changes since v1:
- Retained pinctrl-qcs615-lpass-lpi as a separate driver rather
than extending sdm670-lpass-lpi, due to register layout and
function mux deviations between the two SoCs.
- Added i2s2_clk, i2s2_ws and i2s2_data mux functions on
GPIO23-28 to support a 4-lane I2S bus.
- Removed unused gpio*_pins[] arrays that were mistakenly copied
from the top-level msm pinctrl driver.
- Split defconfig enablement into a separate patch per subsystem
convention.
Link: https://lore.kernel.org/all/20260908075854.3015560-1-karthik.s@oss.qualcomm.com/ [v1]
Karthik S (3):
dt-bindings: pinctrl: qcom: Add QCS615 LPASS LPI pinctrl bindings
pinctrl: qcom: Add qcs615 lpass lpi pinctrl driver
arm64: defconfig: Enable QCS615 LPASS LPI pinctrl
.../qcom,qcs615-lpass-lpi-pinctrl.yaml | 114 +++++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/pinctrl/qcom/Kconfig | 10 ++
drivers/pinctrl/qcom/Makefile | 1 +
.../pinctrl/qcom/pinctrl-qcs615-lpass-lpi.c | 161 ++++++++++++++++++
5 files changed, 287 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qcs615-lpass-lpi-pinctrl.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-qcs615-lpass-lpi.c
--
2.34.1
next reply other threads:[~2026-11-17 7:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 7:50 Karthik S [this message]
2026-11-17 7:50 ` [PATCH v2 1/3] dt-bindings: pinctrl: qcom: Add QCS615 LPASS LPI pinctrl bindings Karthik S
2026-11-17 7:50 ` [PATCH v2 2/3] pinctrl: qcom: Add qcs615 lpass lpi pinctrl driver Karthik S
2026-11-17 7:51 ` [PATCH v2 3/3] arm64: defconfig: Enable QCS615 LPASS LPI pinctrl Karthik S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117075100.272535-1-karthik.s@oss.qualcomm.com \
--to=karthik.s@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=brgl@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®