From: Jelly Jia <Jelly.Jia@cixtech.com>
To: vkoul@kernel.org, Frank.Li@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, robin.murphy@arm.com
Cc: devicetree@vger.kernel.org, cix-kernel-upstream@cixtech.com,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jelly.Jia@cixtech.com
Subject: [PATCH v7 00/10] dmaengine: arm-dma350: Add slave support and Sky1 integration
Date: Tue, 17 Nov 2026 17:43:25 +0800 [thread overview]
Message-ID: <20261117094335.1393735-1-Jelly.Jia@cixtech.com> (raw)
Hello,
This series adds scatter-gather and cyclic peripheral transfers to the
Arm DMA-350 driver and describes the CIX Sky1 clock/reset integration.
The companion AUDSS interrupt-path series builds on these changes.
The first five patches fix existing trigger, DMA mask, coherency,
IRQ/termination and queued-status handling. Patches 6 and 7 prepare
managed registration and command bookkeeping before patch 8 adds slave
and cyclic transfers. The final two patches describe and handle the
integration clock and optional reset. DTS enablement is kept separate.
Linked commands use a coherent DMA pool and descriptor-owned peripheral
resource mappings. Sky1 has no IOMMU on this path, but its RCSU windows
still require CPU-to-DMA address translation through the DMA API.
Changes since v6:
- Split existing fixes and memcpy/memset preparation out of the new
slave/cyclic support. (Frank.)
- Use named little-endian hardware command fields and fill the coherent
pool directly. Keep CPU-endian memcpy/memset command storage and MMIO
handling; decode peripheral fields only when loading their registers.
Derive SG lengths from saved command sizes without cmd_len[]. (Frank.)
- Remove the prep-time DMA write barrier; retain the final non-relaxed
channel-enable writel and normal descriptor publication locking.
Keep descriptor-owned peripheral address mappings and the distinction
between read-only interrupt flags and W1C status bits. (Frank.)
- Use scoped guards consistently without extending critical sections,
consistent device_config/device_caps names and managed DMA/OF
registration. (Frank.)
- Put the submitter's Signed-off-by after the retained Reviewed-by tags.
(Frank.)
Previous version:
https://lore.kernel.org/r/20261106013453.1134239-1-Jelly.Jia@cixtech.com
Jelly Jia (10):
dmaengine: arm-dma350: Fix source trigger bit
dmaengine: arm-dma350: Check DMA mask setup errors
dmaengine: arm-dma350: Initialize channel coherency
dmaengine: arm-dma350: Serialize IRQ and termination state
dmaengine: arm-dma350: Report submitted descriptor status
dmaengine: arm-dma350: Use managed device registration
dmaengine: arm-dma350: Track descriptor byte lengths explicitly
dmaengine: arm-dma350: Add slave and cyclic transfer support
dt-bindings: dma: arm,dma-350: Describe the CIX Sky1 integration
dmaengine: arm-dma350: Support integration clocks and resets
.../devicetree/bindings/dma/arm,dma-350.yaml | 30 +-
drivers/dma/arm-dma350.c | 946 ++++++++++++++++--
2 files changed, 886 insertions(+), 90 deletions(-)
base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
--
2.54.0
next reply other threads:[~2026-11-17 9:43 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 9:43 Jelly Jia [this message]
2026-11-17 9:43 ` [PATCH v7 01/10] dmaengine: arm-dma350: Fix source trigger bit Jelly Jia
2026-11-17 9:43 ` [PATCH v7 02/10] dmaengine: arm-dma350: Check DMA mask setup errors Jelly Jia
2026-11-17 9:43 ` [PATCH v7 03/10] dmaengine: arm-dma350: Initialize channel coherency Jelly Jia
2026-11-17 9:43 ` [PATCH v7 04/10] dmaengine: arm-dma350: Serialize IRQ and termination state Jelly Jia
2026-11-17 9:43 ` [PATCH v7 05/10] dmaengine: arm-dma350: Report submitted descriptor status Jelly Jia
2026-11-17 9:43 ` [PATCH v7 06/10] dmaengine: arm-dma350: Use managed device registration Jelly Jia
2026-11-17 9:43 ` [PATCH v7 07/10] dmaengine: arm-dma350: Track descriptor byte lengths explicitly Jelly Jia
2026-11-17 9:43 ` [PATCH v7 08/10] dmaengine: arm-dma350: Add slave and cyclic transfer support Jelly Jia
2026-11-17 9:43 ` [PATCH v7 09/10] dt-bindings: dma: arm,dma-350: Describe the CIX Sky1 integration Jelly Jia
2026-11-17 9:43 ` [PATCH v7 10/10] dmaengine: arm-dma350: Support integration clocks and resets Jelly Jia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117094335.1393735-1-Jelly.Jia@cixtech.com \
--to=jelly.jia@cixtech.com \
--cc=Frank.Li@kernel.org \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®