From: Jelly Jia <Jelly.Jia@cixtech.com>
To: vkoul@kernel.org, Frank.Li@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, robin.murphy@arm.com,
sboyd@kernel.org, bmasney+clk@redhat.com,
jbrunet+clk@baylibre.com, tglx@kernel.org
Cc: devicetree@vger.kernel.org, cix-kernel-upstream@cixtech.com,
dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Jelly.Jia@cixtech.com,
linux-clk@vger.kernel.org, joakim.zhang@cixtech.com,
radu@rendec.net
Subject: [PATCH v4 3/5] clk: cix: Register the Sky1 AUDSS IRQ auxiliary device
Date: Tue, 17 Nov 2026 17:44:06 +0800 [thread overview]
Message-ID: <20261117094408.1393837-4-Jelly.Jia@cixtech.com> (raw)
In-Reply-To: <20261117094408.1393837-1-Jelly.Jia@cixtech.com>
Register an auxiliary IRQ device for CRU nodes declaring an interrupt
controller, following the existing reset device pattern. Share a raw-lock
regmap with the IRQ driver and preserve gate/reset context while powering
down the CRU. Restore the parent before child IRQ delivery resumes using
noirq system-sleep ordering.
The existing reset-sky1-audss.c is unchanged. Auxiliary child teardown must
run before parent regmap/runtime-PM cleanup.
Signed-off-by: Jelly Jia <Jelly.Jia@cixtech.com>
---
drivers/clk/cix/clk-sky1-audss.c | 37 +++++++++++++++++++++++++++++---
1 file changed, 34 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/cix/clk-sky1-audss.c b/drivers/clk/cix/clk-sky1-audss.c
index e096b8121df3..fa51cdf4f4bd 100644
--- a/drivers/clk/cix/clk-sky1-audss.c
+++ b/drivers/clk/cix/clk-sky1-audss.c
@@ -2,6 +2,7 @@
// Copyright 2026 Cix Technology Group Co., Ltd.
#include <linux/auxiliary_bus.h>
+#include <linux/bits.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
@@ -18,7 +19,9 @@
#define INFO_CLK_GATE 0x10
#define INFO_CLK_DIV 0x14
#define INFO_CLK_MUX 0x18
+#define INFO_AP_IRQC 0x54
#define INFO_MCLK 0x70
+#define INFO_SW_RESETN 0x78
#define SKY1_AUDSS_CLK_PARENTS_CNT 4
#define SKY1_AUDSS_NUM_CLKS (CLK_MCLK4 + 1)
@@ -28,7 +31,9 @@ static u32 sky1_reg_save[][2] = {
{ INFO_CLK_GATE, 0 },
{ INFO_CLK_DIV, 0 },
{ INFO_CLK_MUX, 0 },
+ { INFO_AP_IRQC, 0 },
{ INFO_MCLK, 0 },
+ { INFO_SW_RESETN, 0 },
};
static const char * const sky1_audss_clk_names[SKY1_AUDSS_CLK_PARENTS_CNT] = {
@@ -519,6 +524,7 @@ static const struct regmap_config sky1_audss_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
+ .use_raw_spinlock = true,
};
struct sky1_audss_clks_priv {
@@ -928,6 +934,21 @@ static int sky1_audss_clks_enable(struct sky1_audss_clks_priv *priv)
return err;
}
+static int sky1_audss_irq_controller_register(struct device *dev)
+{
+ struct auxiliary_device *adev;
+
+ if (!IS_ENABLED(CONFIG_IRQ_SKY1_AUDSS) ||
+ !of_property_present(dev->of_node, "interrupt-controller"))
+ return 0;
+
+ adev = devm_auxiliary_device_create(dev, "irq", NULL);
+ if (!adev)
+ return -ENODEV;
+
+ return 0;
+}
+
static void sky1_audss_clks_disable(struct sky1_audss_clks_priv *priv)
{
const struct sky1_audss_clks_devtype_data *devtype_data = priv->devtype_data;
@@ -1110,6 +1131,13 @@ static int sky1_audss_clk_probe(struct platform_device *pdev)
goto fail_pm;
}
+ /* Remove auxiliary children before the parent runtime-PM cleanup. */
+ ret = sky1_audss_irq_controller_register(dev);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to set up AUDSS DMA IRQs\n");
+ goto fail_pm;
+ }
+
pm_runtime_put_sync(dev);
return 0;
@@ -1125,6 +1153,7 @@ static int __maybe_unused sky1_audss_clk_runtime_suspend(struct device *dev)
const struct sky1_audss_clks_devtype_data *devtype_data = priv->devtype_data;
unsigned long flags;
int i;
+ int ret;
spin_lock_irqsave(&priv->lock, flags);
for (i = 0; i < devtype_data->reg_save_size; i++)
@@ -1132,7 +1161,9 @@ static int __maybe_unused sky1_audss_clk_runtime_suspend(struct device *dev)
devtype_data->reg_save[i][0], &devtype_data->reg_save[i][1]);
spin_unlock_irqrestore(&priv->lock, flags);
- reset_control_assert(priv->rst_noc);
+ ret = reset_control_assert(priv->rst_noc);
+ if (ret)
+ return ret;
sky1_audss_clks_disable(priv);
@@ -1170,8 +1201,8 @@ static int __maybe_unused sky1_audss_clk_runtime_resume(struct device *dev)
static const struct dev_pm_ops sky1_audss_clk_pm_ops = {
SET_RUNTIME_PM_OPS(sky1_audss_clk_runtime_suspend,
sky1_audss_clk_runtime_resume, NULL)
- SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
- pm_runtime_force_resume)
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
};
static const struct sky1_audss_clks_devtype_data sky1_devtype_data = {
--
2.54.0
next prev parent reply other threads:[~2026-11-17 9:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 9:44 [PATCH v4 0/5] soc: cix: Add the Sky1 AUDSS DMA-350 interrupt path Jelly Jia
2026-11-17 9:44 ` [PATCH v4 1/5] dt-bindings: soc: cix: Describe the Sky1 AUDSS DMA IRQ controller Jelly Jia
2026-11-17 9:44 ` [PATCH v4 2/5] irqchip: Add the Sky1 AUDSS auxiliary interrupt controller Jelly Jia
2026-11-17 9:44 ` Jelly Jia [this message]
2026-11-17 9:44 ` [PATCH v4 4/5] dt-bindings: dma: arm,dma-350: Document dma-channel-mask Jelly Jia
2026-11-17 9:44 ` [PATCH v4 5/5] dmaengine: arm-dma350: Honour dma-channel-mask Jelly Jia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117094408.1393837-4-Jelly.Jia@cixtech.com \
--to=jelly.jia@cixtech.com \
--cc=Frank.Li@kernel.org \
--cc=bmasney+clk@redhat.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=joakim.zhang@cixtech.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=radu@rendec.net \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=sboyd@kernel.org \
--cc=tglx@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®