From: rofikkerneldev <rofikcoga@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
rofikkerneldev <rofikcoga@gmail.com>
Subject: [PATCH v1 05/11] drm/panel: add LG SW43103 panel driver
Date: Tue, 17 Nov 2026 13:39:40 +0100 [thread overview]
Message-ID: <20261117123946.668557-6-rofikcoga@gmail.com> (raw)
In-Reply-To: <20261117123946.668557-1-rofikcoga@gmail.com>
Add support for the 1080x2460 SW43103 AMOLED panel. Handle power and
reset sequencing, DCS backlight control, and the DSC configuration
required by the panel.
Signed-off-by: rofikkerneldev <rofikcoga@gmail.com>
---
MAINTAINERS | 1 +
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-lg-sw43103.c | 594 +++++++++++++++++++++++
4 files changed, 609 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-lg-sw43103.c
diff --git a/MAINTAINERS b/MAINTAINERS
index bca5065166c25..abdaabe16ed53 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15235,6 +15235,7 @@ LG SW43103 PANEL DRIVER
M: rofikkerneldev <rofikcoga@gmail.com>
S: Maintained
F: Documentation/devicetree/bindings/display/panel/lg,sw43103.yaml
+F: drivers/gpu/drm/panel/panel-lg-sw43103.c
LG V60 THINQ 5G (TIMELM) SUPPORT
M: rofikkerneldev <rofikcoga@gmail.com>
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 7a520b4d60fef..e765b9c7b02e6 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -540,6 +540,19 @@ config DRM_PANEL_LG_LG4573
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
+config DRM_PANEL_LG_SW43103
+ tristate "LG / BOE SW43103 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_DISPLAY_DSC_HELPER
+ select DRM_DISPLAY_HELPER
+ help
+ Say Y here if you want to enable support for LG / BOE SW43103 panel.
+ The panel has a 1080x2460@60Hz resolution and uses DSC command mode.
+ It is used on devices such as the LG V60 ThinQ 5G (timelm).
+ To compile this driver as a module, choose M here.
+
config DRM_PANEL_LG_SW43408
tristate "LG SW43408 panel"
depends on GPIOLIB
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index da5175909d540..c6f3280cd5828 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_DRM_PANEL_LINCOLNTECH_LCD197) += panel-lincolntech-lcd197.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LD070WX3) += panel-lg-ld070wx3.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_LG_SW43103) += panel-lg-sw43103.o
obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
obj-$(CONFIG_DRM_PANEL_LXD_M9189A) += panel-lxd-m9189a.o
obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
diff --git a/drivers/gpu/drm/panel/panel-lg-sw43103.c b/drivers/gpu/drm/panel/panel-lg-sw43103.c
new file mode 100644
index 0000000000000..caab54e0d1153
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-lg-sw43103.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2026 Rofik Kernel <rofikcoga@gmail.com>
+ * Panel driver for LG / BOE SW43103 FHD+ DSC Command Mode AMOLED panel
+ * (LG V60 ThinQ 5G - timelm)
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+
+#define NUM_SUPPLIES 2
+
+struct sw43103_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *link;
+
+ struct regulator_bulk_data supplies[NUM_SUPPLIES];
+
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *enable_gpio;
+
+ struct drm_dsc_config dsc;
+};
+
+static inline struct sw43103_panel *to_panel_info(struct drm_panel *panel)
+{
+ return container_of(panel, struct sw43103_panel, base);
+}
+
+static void sw43103_init_sequence(struct mipi_dsi_multi_context *ctx)
+{
+ /* Manufacturer Command Protect Unlock */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa1);
+
+ /* Column Address Set: 0 to 1079 (0x0437) */
+ mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_COLUMN_ADDRESS,
+ 0x00, 0x00, 0x04, 0x37);
+
+ /* Page Address Set: 0 to 2459 (0x099b) */
+ mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PAGE_ADDRESS,
+ 0x00, 0x00, 0x09, 0x9b);
+
+ /* HBM Mode2 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0x55, 0x08);
+
+ /* Partial Address Row Set: 0 to 2459 */
+ mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PARTIAL_ROWS,
+ 0x00, 0x00, 0x09, 0x9b);
+
+ /* Partial Address Column Set: 0 to 1079 */
+ mipi_dsi_dcs_write_seq_multi(ctx, MIPI_DCS_SET_PARTIAL_COLUMNS,
+ 0x00, 0x00, 0x04, 0x37);
+
+ /* Tear Effect On */
+ mipi_dsi_dcs_set_tear_on_multi(ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+ /* Manufacturer Command Protect */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xca);
+
+ /* Sleep Out */
+ mipi_dsi_dcs_exit_sleep_mode_multi(ctx);
+ mipi_dsi_msleep(ctx, 120);
+
+ /* MCS Lv1 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa1);
+
+ /* Workaround for AOD VBP Issue */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb3,
+ 0x91, 0x49, 0x00, 0x0f, 0x0c, 0x00,
+ 0x0f, 0x0c, 0x28, 0x00, 0x02, 0x14);
+
+ /* Global IRC */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb1,
+ 0x61, 0xc0, 0x00, 0x00, 0x00, 0x10, 0xff);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb2,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0xea, 0x6b, 0x60, 0x58, 0x50, 0x49, 0x41,
+ 0x3a, 0x33, 0x2c, 0x25, 0x1e, 0x17, 0x11, 0x0b,
+ 0x05, 0x6c, 0x61, 0x58, 0x50, 0x48, 0x40, 0x38,
+ 0x31, 0x29, 0x22, 0x1b, 0x14, 0x0d, 0x06, 0x00,
+ 0x62, 0x57, 0x4d, 0x44, 0x3c);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb3,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x34, 0x2d, 0x25, 0x1e, 0x16, 0x0f, 0x08,
+ 0x01, 0x00, 0x57, 0x4c, 0x42, 0x3a, 0x31, 0x29,
+ 0x22, 0x1a, 0x12, 0x0b, 0x03, 0x00, 0x00, 0x4c,
+ 0x42, 0x38, 0x2e, 0x26, 0x1e, 0x16, 0x0e, 0x07,
+ 0x00, 0x00, 0x00, 0x45, 0x39);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb4,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x2f, 0x25, 0x1c, 0x14, 0x0c, 0x04, 0x00,
+ 0x00, 0x00, 0x34, 0x2a, 0x21, 0x19, 0x10, 0x09,
+ 0x01, 0x00, 0x00, 0x00, 0x2e, 0x23, 0x19, 0x10,
+ 0x08, 0x00, 0x00, 0x00, 0x00, 0x25, 0x1b, 0x11,
+ 0x08, 0x00, 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb5,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f,
+ 0x13, 0x09, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0c,
+ 0x03, 0x00, 0x00, 0x00, 0x0e, 0x06, 0x00, 0x00,
+ 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb6,
+ 0x44, 0x31, 0x10, 0x00, 0x00, 0x64, 0x00, 0x59,
+ 0xf3, 0x10, 0x80, 0x30, 0x20, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00);
+
+ /* Global IRC DCC Control */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd1,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0xd0, 0x10, 0x02,
+ 0x00, 0x00, 0x00);
+
+ /* V256 Enable */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa3);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xee, 0x02, 0x00, 0x00);
+
+ /* Gamma Band 1 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb8,
+ 0x00, 0x00, 0x83, 0xff, 0x5c, 0x96, 0xf2, 0x29,
+ 0x84, 0xb4, 0xd2, 0x77, 0x70, 0xa3, 0xcb, 0xe4);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb9,
+ 0x00, 0x00, 0x02, 0xff, 0x4d, 0xd7, 0xb4, 0xfe,
+ 0x66, 0xa0, 0xca, 0x6f, 0x6f, 0xa8, 0xce, 0xe6);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xba,
+ 0x00, 0x00, 0x84, 0xff, 0x89, 0x3d, 0xec, 0x28,
+ 0x83, 0xae, 0xd2, 0x7e, 0x77, 0xa8, 0xcb, 0xe0);
+
+ /* Gamma Band 2 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xbb,
+ 0x00, 0x13, 0x83, 0xff, 0x61, 0x66, 0xed, 0x24,
+ 0x81, 0xaf, 0xd4, 0x7b, 0x6b, 0xa8, 0xce, 0xe4);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xbc,
+ 0x00, 0x13, 0x02, 0xff, 0x53, 0xb4, 0xad, 0xf4,
+ 0x5e, 0x9d, 0xc7, 0x71, 0x68, 0xaa, 0xcf, 0xe6);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xbd,
+ 0x00, 0x13, 0x84, 0xff, 0x8a, 0x05, 0xea, 0x23,
+ 0x80, 0xaf, 0xd3, 0x82, 0x74, 0xab, 0xce, 0xe3);
+
+ /* Gamma Band 3 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xbe,
+ 0x00, 0x37, 0x83, 0xff, 0x77, 0x5c, 0xdd, 0x15,
+ 0x79, 0xaf, 0xcf, 0x72, 0x6f, 0xa7, 0xce, 0xe5);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xbf,
+ 0x00, 0x37, 0x02, 0xff, 0x65, 0xaa, 0xa0, 0xe5,
+ 0x52, 0x96, 0xc4, 0x64, 0x6b, 0xa9, 0xcf, 0xe7);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc0,
+ 0x00, 0x37, 0x83, 0xff, 0x9d, 0xfd, 0xd8, 0x1c,
+ 0x7c, 0xac, 0xd0, 0x7b, 0x78, 0xac, 0xce, 0xe4);
+
+ /* Gamma Band 4 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc1,
+ 0x02, 0x24, 0x82, 0xff, 0x7e, 0xf1, 0xcc, 0x05,
+ 0x6e, 0xa4, 0xca, 0x6f, 0x6e, 0xab, 0xd2, 0xe8);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc2,
+ 0x02, 0x24, 0x02, 0xff, 0x6e, 0x58, 0xa3, 0xd5,
+ 0x3d, 0x8c, 0xbc, 0x59, 0x66, 0xaa, 0xd2, 0xe8);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc3,
+ 0x02, 0x24, 0x83, 0xff, 0x9e, 0x7e, 0xc5, 0x10,
+ 0x72, 0xab, 0xcd, 0x78, 0x79, 0xb0, 0xd5, 0xe9);
+
+ /* Gamma Band 5 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc4,
+ 0x04, 0x0f, 0x02, 0xff, 0x88, 0xa4, 0xc4, 0xe9,
+ 0x60, 0xa0, 0xc8, 0x64, 0x6b, 0xac, 0xd3, 0xe9);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc5,
+ 0x04, 0x0f, 0x02, 0xff, 0x7a, 0x20, 0xac, 0xca,
+ 0x30, 0x7d, 0xb6, 0x4a, 0x5c, 0xa8, 0xd2, 0xe9);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc6,
+ 0x04, 0x0f, 0x03, 0xff, 0xa8, 0x2e, 0xbd, 0xfa,
+ 0x65, 0xa3, 0xcc, 0x6e, 0x76, 0xb3, 0xd6, 0xea);
+
+ /* Gamma Band 6 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc7,
+ 0x06, 0x12, 0x02, 0xff, 0x99, 0x7d, 0xbc, 0xde,
+ 0x51, 0x8e, 0xc6, 0x58, 0x63, 0xaa, 0xd2, 0xe9);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc8,
+ 0x06, 0x12, 0x02, 0xff, 0x8d, 0x02, 0x9a, 0xcf,
+ 0x1e, 0x6b, 0xb0, 0x37, 0x50, 0xa3, 0xd0, 0xe7);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc9,
+ 0x06, 0x12, 0x03, 0xff, 0xbc, 0x04, 0xb3, 0xdb,
+ 0x63, 0x8f, 0xc6, 0x67, 0x6f, 0xb1, 0xd5, 0xea);
+
+ /* Gamma Band 7 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xca,
+ 0x08, 0x0a, 0x02, 0xff, 0xa3, 0x44, 0xca, 0xda,
+ 0x2d, 0x8d, 0xbc, 0x4c, 0x5a, 0xa7, 0xd0, 0xea);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xcb,
+ 0x08, 0x0a, 0x01, 0xff, 0x97, 0xd5, 0xb4, 0xdb,
+ 0x21, 0x6f, 0xa1, 0x24, 0x42, 0x9d, 0xcd, 0xe7);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xcc,
+ 0x08, 0x0a, 0x02, 0xff, 0xc6, 0xc5, 0xb8, 0xc7,
+ 0x46, 0x98, 0xbd, 0x5a, 0x68, 0xaf, 0xd4, 0xea);
+
+ /* Gamma Band 8 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xcd,
+ 0x0c, 0x02, 0x01, 0xff, 0xb2, 0xfd, 0xac, 0xd5,
+ 0x25, 0x6d, 0xb7, 0x3b, 0x45, 0x9e, 0xd0, 0xe6);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xce,
+ 0x0c, 0x02, 0x01, 0xff, 0xa5, 0x9a, 0xac, 0xe2,
+ 0x31, 0x68, 0xab, 0x0e, 0x2a, 0x90, 0xc9, 0xe3);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xcf,
+ 0x0c, 0x02, 0x02, 0xff, 0xd5, 0x74, 0xad, 0xe6,
+ 0x2f, 0x7c, 0xbf, 0x43, 0x58, 0xa6, 0xd3, 0xe9);
+
+ /* Gamma Band 9 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd0,
+ 0x12, 0x00, 0x01, 0xff, 0xc8, 0x97, 0x01, 0xb6,
+ 0x0b, 0x82, 0xab, 0x0a, 0x26, 0x8d, 0xc7, 0xe4);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd1,
+ 0x12, 0x00, 0x01, 0xff, 0xbe, 0x4a, 0x01, 0xc0,
+ 0x44, 0x80, 0xb3, 0x03, 0x06, 0x76, 0xba, 0xde);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd2,
+ 0x12, 0x00, 0x02, 0xff, 0xf2, 0x00, 0x01, 0xb1,
+ 0x11, 0x5f, 0xa8, 0x16, 0x30, 0x94, 0xc8, 0xe7);
+
+ /* Gamma Band 10 */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd3,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd4,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd5,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xcd,
+ 0x10, 0x12, 0x01, 0x5a, 0x90, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x5d);
+
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa1);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0x55,
+ 0x08, 0x00, 0x82, 0xa8, 0x1c, 0x61, 0x0a, 0x90,
+ 0x04, 0x00);
+
+ /* Dimming Frame Setting */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa3);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb3,
+ 0x1f, 0x63, 0x00, 0x00, 0x06);
+
+ /* Default Color Mode (Natural) */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0x53, 0x84);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa4);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb4,
+ 0x00, 0x03, 0x05, 0xaf, 0x03, 0x05, 0xaf, 0x03,
+ 0x05, 0xaf);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb5,
+ 0x00, 0xff, 0x94, 0x1f, 0xae, 0x37, 0xae, 0x1f,
+ 0x94, 0x00, 0xfb, 0x94, 0x1e, 0xad, 0x35, 0xab,
+ 0x1c, 0x90, 0x00, 0xdd, 0x8f, 0x16, 0x9f, 0x24,
+ 0x97, 0x04, 0x75);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb7,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb8,
+ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x80);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb9,
+ 0x35, 0x2d, 0x2d, 0x37, 0x34, 0x35, 0x36, 0x36,
+ 0x36, 0x2d, 0x35, 0x33);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xba,
+ 0x80, 0x80, 0x80, 0x80, 0x88, 0x80, 0x80, 0x80,
+ 0x80, 0x80, 0x80, 0x7d);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xbb,
+ 0x80, 0x5a, 0x7b, 0x95, 0x65, 0x70, 0x96, 0x90,
+ 0x90, 0x90, 0x83, 0x72);
+
+ /* DCC(GCC) Off */
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa1);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xc2,
+ 0xf3, 0x20, 0x00, 0x00, 0x1d);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xb0, 0xa5);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd1,
+ 0x0a, 0x00, 0x01);
+ mipi_dsi_msleep(ctx, 20);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd1,
+ 0x02, 0x00, 0x01);
+ mipi_dsi_dcs_write_seq_multi(ctx, 0xd1,
+ 0x00, 0x00, 0x01);
+}
+
+static int sw43103_program(struct drm_panel *panel)
+{
+ struct sw43103_panel *sw43103 = to_panel_info(panel);
+ struct mipi_dsi_multi_context ctx = { .dsi = sw43103->link };
+ struct drm_dsc_picture_parameter_set pps;
+
+ sw43103_init_sequence(&ctx);
+
+ /* Transmit PPS in high speed mode */
+ sw43103->link->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ drm_dsc_pps_payload_pack(&pps, sw43103->link->dsc);
+
+ mipi_dsi_picture_parameter_set_multi(&ctx, &pps);
+
+ /* Switch back to low power mode for DSC compression enable */
+ sw43103->link->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ /* Enable DSC compression mode with PPS 0 */
+ mipi_dsi_compression_mode_ext_multi(&ctx, true,
+ MIPI_DSI_COMPRESSION_DSC, 0);
+
+ return ctx.accum_err;
+}
+
+static int sw43103_prepare(struct drm_panel *panel)
+{
+ struct sw43103_panel *ctx = to_panel_info(panel);
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ if (ctx->enable_gpio)
+ gpiod_set_value_cansleep(ctx->enable_gpio, 1);
+
+ usleep_range(5000, 6000);
+
+ /* Hardware reset sequence: deassert, assert 2ms, deassert */
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(2000, 3000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+
+ ret = sw43103_program(panel);
+ if (ret)
+ goto poweroff;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ if (ctx->enable_gpio)
+ gpiod_set_value_cansleep(ctx->enable_gpio, 0);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return ret;
+}
+
+static int sw43103_enable(struct drm_panel *panel)
+{
+ struct sw43103_panel *sw43103 = to_panel_info(panel);
+ struct mipi_dsi_multi_context ctx = { .dsi = sw43103->link };
+
+ /* Display On */
+ mipi_dsi_dcs_set_display_on_multi(&ctx);
+ mipi_dsi_msleep(&ctx, 20);
+
+ /* Enable display backlight control and full brightness */
+ mipi_dsi_dcs_write_seq_multi(&ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x2c);
+ mipi_dsi_dcs_write_seq_multi(&ctx, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, 0x07, 0xff);
+
+ return ctx.accum_err;
+}
+
+static int sw43103_disable(struct drm_panel *panel)
+{
+ struct sw43103_panel *sw43103 = to_panel_info(panel);
+ struct mipi_dsi_multi_context ctx = { .dsi = sw43103->link };
+
+ /* Display Off (0x28) */
+ mipi_dsi_dcs_set_display_off_multi(&ctx);
+ mipi_dsi_msleep(&ctx, 20);
+
+ /* Sleep In (0x10) */
+ mipi_dsi_dcs_enter_sleep_mode_multi(&ctx);
+ mipi_dsi_msleep(&ctx, 80);
+
+ return ctx.accum_err;
+}
+
+static int sw43103_unprepare(struct drm_panel *panel)
+{
+ struct sw43103_panel *sw43103 = to_panel_info(panel);
+
+ gpiod_set_value_cansleep(sw43103->reset_gpio, 1);
+ if (sw43103->enable_gpio)
+ gpiod_set_value_cansleep(sw43103->enable_gpio, 0);
+
+ return regulator_bulk_disable(ARRAY_SIZE(sw43103->supplies), sw43103->supplies);
+}
+
+static const struct drm_display_mode sw43103_mode = {
+ .clock = 179177,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 50,
+ .hsync_end = 1080 + 50 + 30,
+ .htotal = 1080 + 50 + 30 + 50,
+ .vdisplay = 2460,
+ .vsync_start = 2460 + 4,
+ .vsync_end = 2460 + 4 + 2,
+ .vtotal = 2460 + 4 + 2 + 2,
+ .width_mm = 69,
+ .height_mm = 158,
+ .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static int sw43103_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ return drm_connector_helper_get_modes_fixed(connector, &sw43103_mode);
+}
+
+static int sw43103_backlight_update_status(struct backlight_device *bl)
+{
+ struct mipi_dsi_device *dsi = bl_get_data(bl);
+ u16 brightness = backlight_get_brightness(bl);
+ u8 ctrl = 0x2c;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, &ctrl, sizeof(ctrl));
+ if (ret < 0)
+ goto out;
+
+ ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+
+out:
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ return ret < 0 ? ret : 0;
+}
+
+static const struct backlight_ops sw43103_backlight_ops = {
+ .update_status = sw43103_backlight_update_status,
+};
+
+static int sw43103_backlight_init(struct sw43103_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ const struct backlight_properties props = {
+ .type = BACKLIGHT_PLATFORM,
+ .brightness = 1024,
+ .max_brightness = 2047,
+ };
+
+ ctx->base.backlight = devm_backlight_device_register(dev, dev_name(dev), dev,
+ ctx->link,
+ &sw43103_backlight_ops,
+ &props);
+
+ if (IS_ERR(ctx->base.backlight))
+ return dev_err_probe(dev, PTR_ERR(ctx->base.backlight),
+ "Failed to create backlight\n");
+
+ return 0;
+}
+
+static const struct drm_panel_funcs sw43103_funcs = {
+ .prepare = sw43103_prepare,
+ .unprepare = sw43103_unprepare,
+ .enable = sw43103_enable,
+ .disable = sw43103_disable,
+ .get_modes = sw43103_get_modes,
+};
+
+static const struct of_device_id sw43103_of_match[] = {
+ { .compatible = "lg,sw43103" },
+ { .compatible = "boe,sw43103" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sw43103_of_match);
+
+static int sw43103_add(struct sw43103_panel *ctx)
+{
+ struct device *dev = &ctx->link->dev;
+ int ret;
+
+ ctx->supplies[0].supply = "vddi"; /* 1.8 V */
+ ctx->supplies[0].init_load_uA = 62000;
+ ctx->supplies[1].supply = "vpnl"; /* 3.0 V */
+ ctx->supplies[1].init_load_uA = 857000;
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return ret;
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ ret = PTR_ERR(ctx->reset_gpio);
+ return dev_err_probe(dev, ret, "cannot get reset gpio\n");
+ }
+
+ ctx->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->enable_gpio)) {
+ ret = PTR_ERR(ctx->enable_gpio);
+ return dev_err_probe(dev, ret, "cannot get enable gpio\n");
+ }
+
+ ret = sw43103_backlight_init(ctx);
+ if (ret < 0)
+ return ret;
+
+ ctx->base.prepare_prev_first = true;
+
+ drm_panel_add(&ctx->base);
+ return 0;
+}
+
+static int sw43103_probe(struct mipi_dsi_device *dsi)
+{
+ struct sw43103_panel *ctx;
+ int ret;
+
+ ctx = devm_drm_panel_alloc(&dsi->dev, __typeof(*ctx), base,
+ &sw43103_funcs, DRM_MODE_CONNECTOR_DSI);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ dsi->mode_flags = MIPI_DSI_MODE_LPM;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->lanes = 4;
+
+ ctx->link = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ret = sw43103_add(ctx);
+ if (ret < 0)
+ return ret;
+
+ /* The panel works only in DSC mode. Set DSC params. */
+ ctx->dsc.dsc_version_major = 1;
+ ctx->dsc.dsc_version_minor = 1;
+
+ /* slice_count * slice_width == 2 * 540 = 1080 */
+ ctx->dsc.pic_width = 1080;
+ ctx->dsc.pic_height = 2460;
+ ctx->dsc.slice_height = 60;
+ ctx->dsc.slice_width = 540;
+ ctx->dsc.slice_count = 2;
+ ctx->dsc.slice_chunk_size = 540;
+ ctx->dsc.bits_per_component = 8;
+ ctx->dsc.bits_per_pixel = 8 << 4;
+ ctx->dsc.block_pred_enable = true;
+
+ dsi->dsc = &ctx->dsc;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret)
+ drm_panel_remove(&ctx->base);
+
+ return ret;
+}
+
+static void sw43103_remove(struct mipi_dsi_device *dsi)
+{
+ struct sw43103_panel *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = sw43103_unprepare(&ctx->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n", ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->base);
+}
+
+static struct mipi_dsi_driver sw43103_driver = {
+ .driver = {
+ .name = "panel-lg-sw43103",
+ .of_match_table = sw43103_of_match,
+ },
+ .probe = sw43103_probe,
+ .remove = sw43103_remove,
+};
+module_mipi_dsi_driver(sw43103_driver);
+
+MODULE_AUTHOR("rofikkerneldev <rofikcoga@gmail.com>");
+MODULE_DESCRIPTION("LG / BOE SW43103 FHD+ DSC Command Mode AMOLED panel");
+MODULE_LICENSE("GPL");
--
2.39.5
next prev parent reply other threads:[~2026-11-17 12:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 12:39 [PATCH v1 00/11] arm64: qcom: Add initial support for LG V60 ThinQ 5G (timelm) rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 01/11] dt-bindings: arm: qcom: add " rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 02/11] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 03/11] arm64: dts: qcom: sm8250-lge-timelm: add reserved memory regions rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 04/11] dt-bindings: display: panel: add LG SW43103 rofikkerneldev
2026-11-17 12:39 ` rofikkerneldev [this message]
2026-11-17 12:39 ` [PATCH v1 06/11] dt-bindings: input: touchscreen: add Silicon Works SW42902 rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 07/11] Input: touchscreen: add Silicon Works SW42902 support rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 08/11] arm64: dts: qcom: sm8250-lge-timelm: enable SW43103 panel rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 09/11] arm64: dts: qcom: sm8250-lge-timelm: add SW42902 touchscreen rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 10/11] arm64: dts: qcom: sm8250-lge-timelm: enable USB Type-C rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 11/11] arm64: dts: qcom: sm8250-lge-timelm: add QCA6390 Bluetooth rofikkerneldev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117123946.668557-6-rofikcoga@gmail.com \
--to=rofikcoga@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®