mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jun Yan <jerrysteve1101@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>
Cc: Jun Yan <jerrysteve1101@gmail.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet
Date: Tue, 17 Nov 2026 22:21:21 +0800	[thread overview]
Message-ID: <20261117142122.246986-1-jerrysteve1101@gmail.com> (raw)

The TaiqiCat A01 has a 100 Mbit/s Ethernet port, which uses the EPHY
integrated into the co-packaged AC200 of the Allwinner H6 SoC.

The AC200 derives its 24 MHz reference clock from PWM1, so enable the
PWM controller and the pwm-clock node that supplies it. Also enable
I2C3, over which the AC200 is accessed, and describe the AC200 EPHY
package on the EMAC MDIO bus, with the EMAC operating in RMII mode.

Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>

---
The AC200 MFD and EPHY drivers/bindings and the sun50i-h6.dtsi AC200
description this depends on are already merged in sunxi/dt-for-7.5.
---
 .../dts/allwinner/sun50i-h6-taiqicat-a01.dts  | 40 +++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
index 225f42bd3b9e..9b192caeecb2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
@@ -14,6 +14,7 @@ / {
 	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
 
 	aliases {
+		ethernet0 = &emac;
 		ethernet1 = &sdio_wifi;
 		serial0 = &uart0;
 	};
@@ -87,6 +88,10 @@ wifi_pwrseq: wifi-pwrseq {
 	};
 };
 
+&ac200_clk {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdca>;
 };
@@ -107,6 +112,14 @@ &ehci3 {
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&ac200_ephy>;
+	status = "okay";
+};
+
 &gpu {
 	mali-supply = <&reg_dcdcc>;
 	status = "okay";
@@ -123,6 +136,29 @@ hdmi_out_con: endpoint {
 	};
 };
 
+&i2c3 {
+	status = "okay";
+};
+
+&mdio {
+	ethernet-phy-package@1 {
+		compatible = "x-powers,ac200-ephy-package";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vcc-supply = <&reg_aldo2>;
+		nvmem-cells = <&ephy_calibration>;
+		nvmem-cell-names = "configuration";
+		x-powers,ac200 = <&ac200>;
+		x-powers,xmii-rx-clock-inverted;
+
+		ac200_ephy: ethernet-phy@1 {
+			compatible = "ethernet-phy-id0044.1400";
+			reg = <1>;
+		};
+	};
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_cldo1>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
@@ -173,6 +209,10 @@ &pio {
 	vcc-pg-supply = <&reg_bldo3>;
 };
 
+&pwm {
+	status = "okay";
+};
+
 &r_i2c {
 	status = "okay";
 
-- 
2.56.1


                 reply	other threads:[~2026-11-17 14:21 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117142122.246986-1-jerrysteve1101@gmail.com \
    --to=jerrysteve1101@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=robh@kernel.org \
    --cc=samuel@sholland.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®