From: "Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
To: neil.armstrong@linaro.org, jesszhan0024@gmail.com,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: maarten.lankhorst@linux.intel.com, mripard@kernel.org,
tzimmermann@suse.de, airlied@gmail.com, simona@ffwll.ch,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
Subject: [PATCH v3 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5)
Date: Tue, 17 Nov 2026 20:33:17 +0300 [thread overview]
Message-ID: <20261117173319.1852638-1-tadilhusrev@gmail.com> (raw)
In-Reply-To: <20261116070212.314228-1-tadilhusrev@gmail.com>
This series adds a DRM panel driver and its DT binding for MIPI-DSI
video-mode panels based on the Novatek NT36525 controller, as fitted on
the Samsung Galaxy XCover5 (SM-G525F, Exynos850). The panel is 720x1480,
uses an active-low reset (RESX), and a DCS init sequence that mirrors
the stock Samsung bring-up. Backlight goes through drm_panel_of_backlight().
Patch 1 dt-bindings (compatible: "novatek,nt36525-xcover5",
"novatek,nt36525")
Patch 2 the panel driver
Apologies to Krzysztof for v2: I sent it as a diff on top of v1's own
(unmerged) patch instead of a complete, standalone patch against
mainline, which is exactly the git-management mistake you flagged. v3
resends both patches as full, self-contained patches that apply
directly to v7.4-rc1, with the v1 -> v2 -> v3 changelog moved below
each patch's "---" line instead of the commit message body (also
flagged by Andy Shevchenko on the related grip-sensor series, and
just as applicable here). No behavioural change from v2.
Tested on a Samsung Galaxy XCover5 running 7.4-rc1 plus this series
(re-confirmed 2026-11-17, kernel 7.4.0-rc1-00023-gdcb8b91fb779+ #30):
the DSI panel connector probes and reports "connected", debugfs
reports the reset gpio as ACTIVE LOW, and /sys/class/backlight/ is
present. checkpatch.pl and dt_binding_check are clean (bar the usual
new-file MAINTAINERS note; the files are covered by the DRM PANEL
DRIVERS wildcards).
Based on v7.4-rc1.
Tool usage
----------
This series was developed during XCover5 mainline bring-up with the help
of an AI coding assistant (Claude Code, Anthropic). The assistant converted
the vendor init stream to mipi_dsi_dcs_write_seq_multi(), drafted the driver
skeleton and the DT binding, and drafted these changelogs. I reviewed every
line, validated the binding (dt_binding_check, yamllint), tested the driver
on hardware, and take full responsibility for the contribution.
Prompt summary: "convert the XCover5 NT36525 vendor panel init into a
mainline drm_panel driver plus DT binding; keep it checkpatch- and
dt_binding_check-clean; test on the device." Review comments are welcome
and I will answer them myself.
Adil Hüsrev Tepe (2):
dt-bindings: display: panel: add Novatek NT36525
drm/panel: add Novatek NT36525 panel driver
.../display/panel/novatek,nt36525.yaml | 83 +++
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36525.c | 491 ++++++++++++++++++
4 files changed, 588 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36525.yaml
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36525.c
--
2.53.0
next prev parent reply other threads:[~2026-11-17 17:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 7:02 [PATCH v1 " Adil Hüsrev Tepe
2026-11-16 7:02 ` [PATCH v1 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-16 7:02 ` [PATCH v1 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-17 10:43 ` [PATCH v2 1/2] dt-bindings: display: panel: novatek,nt36525: fix v1 review issues Adil Hüsrev Tepe
2026-11-17 10:43 ` [PATCH v2 2/2] drm/panel: novatek-nt36525: " Adil Hüsrev Tepe
2026-11-17 10:47 ` Krzysztof Kozlowski
2026-11-17 17:33 ` Adil Hüsrev Tepe
2026-11-17 17:33 ` Adil Hüsrev Tepe [this message]
2026-11-17 17:33 ` [PATCH v3 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117173319.1852638-1-tadilhusrev@gmail.com \
--to=tadilhusrev@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®