From: Coia Prant <coiaprant@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
netdev@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Coia Prant <coiaprant@gmail.com>
Subject: [PATCH net-next v5] net: pcs: xpcs: make supported_interfaces authoritative
Date: Wed, 18 Nov 2026 01:52:15 +0800 [thread overview]
Message-ID: <20261117175215.3015703-1-coiaprant@gmail.com> (raw)
pcs.supported_interfaces is the mask of interfaces a given xpcs
instance actually supports. The compat table describes what the
Synopsys IP can do in general, but a specific integration may support
a different subset. For example, the RK3568 XPCS supports 1000BASE-X,
SGMII and QSGMII in hardware, but does not implement the C73,
10GBASE-R or 2500BASE-X modes that the Synopsys compat table
advertises.
However, xpcs_find_compat() only walks desc->compat[] and does not look
at pcs.supported_interfaces. If a caller ever passes an interface
outside the mask, the core would still find and configure a compat
entry for it, contradicting the mask the glue already set. This was a
known gap: the mask was written but never consulted by the core.
Fix both sides:
- In xpcs_find_compat(), return NULL when the interface is not in
pcs.supported_interfaces, so the mask is authoritative for what the
core will configure.
- In the Rockchip glue, build a platform mask with the three modes
supported by RK3568 (1000BASE-X, SGMII, QSGMII) and intersect it
with the core's supported_interfaces using phy_interface_and().
This narrows the mask inherited from the generic compat table so it
reflects the actual SoC capabilities.
Note that QSGMII is currently filtered out (a no-op) because the core's
compat table does not support it yet, which demonstrates the intended
filtering behavior of this intersection.
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
Changes since v4:
- replace DECLARE_PHY_INTERFACE_MASK_ZERO with DECLARE_PHY_INTERFACE_MASK and initialize it to { 0, }.
Links:
- https://lore.kernel.org/all/20261029094916.3127193-2-coiaprant@gmail.com/ (v1)
- https://lore.kernel.org/all/20261029102728.3189359-2-coiaprant@gmail.com/ (v2)
- https://lore.kernel.org/all/20261102212506.3348537-1-coiaprant@gmail.com/ (v3)
- https://lore.kernel.org/all/20261110160554.918652-1-coiaprant@gmail.com/ (v4)
drivers/net/pcs/pcs-xpcs-rk.c | 10 ++++++++++
drivers/net/pcs/pcs-xpcs.c | 3 +++
2 files changed, 13 insertions(+)
diff --git a/drivers/net/pcs/pcs-xpcs-rk.c b/drivers/net/pcs/pcs-xpcs-rk.c
index ad187fba4e9d..e0057545329a 100644
--- a/drivers/net/pcs/pcs-xpcs-rk.c
+++ b/drivers/net/pcs/pcs-xpcs-rk.c
@@ -480,6 +480,7 @@ MODULE_DEVICE_TABLE(of, xpcs_rk_of_ids);
struct dw_xpcs *xpcs_rk_create(struct device *dev, struct device_node *pcs, int port)
{
+ DECLARE_PHY_INTERFACE_MASK(supported_interfaces) = { 0, };
struct platform_device *pdev;
struct dw_xpcs_rk *pxpcs;
struct dw_xpcs *xpcs;
@@ -536,6 +537,15 @@ struct dw_xpcs *xpcs_rk_create(struct device *dev, struct device_node *pcs, int
return xpcs;
}
+ /*
+ * The RK3568 XPCS supports 1000BASE-X, SGMII and QSGMII.
+ */
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_QSGMII, supported_interfaces);
+ phy_interface_and(xpcs->pcs.supported_interfaces, xpcs->pcs.supported_interfaces,
+ supported_interfaces);
+
xpcs_config_eee_mult_fact(xpcs, pxpcs->eee_mult_fact);
put_device(&pdev->dev);
return xpcs;
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index 6466e0ff2a98..46878a66064e 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -169,6 +169,9 @@ xpcs_find_compat(struct dw_xpcs *xpcs, phy_interface_t interface)
{
const struct dw_xpcs_compat *compat;
+ if (!test_bit(interface, xpcs->pcs.supported_interfaces))
+ return NULL;
+
for (compat = xpcs->desc->compat; compat->supported; compat++)
if (compat->interface == interface)
return compat;
--
2.47.3
reply other threads:[~2026-11-17 17:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261117175215.3015703-1-coiaprant@gmail.com \
--to=coiaprant@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=heiko@sntech.de \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®