mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Lizhi Hou <lizhi.hou@amd.com>
To: <ogabbay@kernel.org>, <quic_jhugo@quicinc.com>,
	<dri-devel@lists.freedesktop.org>, <mario.limonciello@amd.com>,
	<karol.wachowski@linux.intel.com>, <max.zhen@amd.com>
Cc: Lizhi Hou <lizhi.hou@amd.com>, <linux-kernel@vger.kernel.org>,
	<sonal.santan@amd.com>
Subject: [PATCH V2 1/2] accel/amdxdna: Detect a driver command without firmware response
Date: Tue, 17 Nov 2026 13:27:32 -0800	[thread overview]
Message-ID: <20261117212733.172074-1-lizhi.hou@amd.com> (raw)

aie2_hwctx_cfg_debug_bo() and aie2_hwctx_sync_debug_bo() decide success
solely from cmd->result.

cmd->result is only written by aie2_sched_drvcmd_resp_handler(), which
runs when firmware responds. If the job fails before it reaches
firmware, for example aie2_sync_bo() or aie2_config_debug_bo() fail to
send the mailbox message, no response handler runs. cmd is zero
allocated, so cmd->result stays 0 and the caller treats the failed
command as successful. aie2_hwctx_cfg_debug_bo() then goes on to update
abo->assigned_hwctx, leaving it out of sync with firmware.

Set cmd->result to U32_MAX before submitting, so a command which gets
no response is reported as a failure.

Fixes: 7ea046838021 ("accel/amdxdna: Support firmware debug buffer")
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
---
V2:
   Use a simplier fix to address sashiko comment.

 drivers/accel/amdxdna/aie2_ctx.c    | 12 +++++++++---
 drivers/accel/amdxdna/amdxdna_ctx.h |  5 +++++
 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/accel/amdxdna/aie2_ctx.c b/drivers/accel/amdxdna/aie2_ctx.c
index 11f5421e497aa..32458d05635f9 100644
--- a/drivers/accel/amdxdna/aie2_ctx.c
+++ b/drivers/accel/amdxdna/aie2_ctx.c
@@ -989,10 +989,14 @@ static void aie2_cmd_wait(struct amdxdna_hwctx *hwctx, u64 seq)
 	struct dma_fence *out_fence = aie2_cmd_get_out_fence(hwctx, seq);
 	struct amdxdna_dev *xdna = hwctx->client->xdna;
 
-	if (!out_fence) {
-		XDNA_ERR(xdna, "Failed to get fence");
+	/*
+	 * No fence to wait for. Either seq has already signaled and a later
+	 * point pruned it out of the timeline chain, or the syncobj was
+	 * reset. Neither means the command failed, so leave the verdict to
+	 * the caller, which inspects cmd->result.
+	 */
+	if (!out_fence)
 		return;
-	}
 
 	mutex_unlock(&xdna->dev_lock);
 	dma_fence_wait_timeout(out_fence, false, MAX_SCHEDULE_TIMEOUT);
@@ -1022,6 +1026,7 @@ static int aie2_hwctx_cfg_debug_bo(struct amdxdna_hwctx *hwctx, u32 bo_hdl,
 		goto put_obj;
 	}
 	kref_init(&cmd->refcnt);
+	cmd->result = U32_MAX;
 
 	if (attach) {
 		if (abo->assigned_hwctx != AMDXDNA_INVALID_CTX_HANDLE) {
@@ -1095,6 +1100,7 @@ int aie2_hwctx_sync_debug_bo(struct amdxdna_hwctx *hwctx, u32 debug_bo_hdl)
 	if (!cmd)
 		return -ENOMEM;
 	kref_init(&cmd->refcnt);
+	cmd->result = U32_MAX;
 
 	cmd->opcode = SYNC_DEBUG_BO;
 	ret = amdxdna_cmd_submit(client, cmd, AMDXDNA_INVALID_BO_HANDLE,
diff --git a/drivers/accel/amdxdna/amdxdna_ctx.h b/drivers/accel/amdxdna/amdxdna_ctx.h
index 2e6b300d652f8..bf248d3f16ed1 100644
--- a/drivers/accel/amdxdna/amdxdna_ctx.h
+++ b/drivers/accel/amdxdna/amdxdna_ctx.h
@@ -145,6 +145,11 @@ enum amdxdna_job_opcode {
 
 struct amdxdna_drv_cmd {
 	enum amdxdna_job_opcode	opcode;
+	/*
+	 * Written by the firmware response handler only. Set it to U32_MAX
+	 * before submitting, so a job which never reaches firmware, and thus
+	 * gets no response, is not mistaken for a successful command.
+	 */
 	u32			result;
 	struct kref		refcnt;
 };
-- 
2.34.1


             reply	other threads:[~2026-11-17 21:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 21:27 Lizhi Hou [this message]
2026-11-17 21:27 ` [PATCH V2 2/2] accel/amdxdna: Abort jobs when the firmware context is gone Lizhi Hou
2026-11-17 21:54   ` Max Zhen
2026-11-17 21:54 ` [PATCH V2 1/2] accel/amdxdna: Detect a driver command without firmware response Max Zhen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117212733.172074-1-lizhi.hou@amd.com \
    --to=lizhi.hou@amd.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=karol.wachowski@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=max.zhen@amd.com \
    --cc=ogabbay@kernel.org \
    --cc=quic_jhugo@quicinc.com \
    --cc=sonal.santan@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®