From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=209.85.221.54 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1794957989; b=oGbwizZUDubiYcHPs6EIWm/BMmFZVcRMxCgtWJSPeDmC35mctzq2JQjggY4aJJjn84gU ndi4IVTZn9wuIeoXnVs/YWQmftzHXZcaS8gnuw0bX7DTSjOgHWPwb2ilBbmRL/onitQ7X b5pT8diC1AQg0YAxBTRcr0HqwB9j8PuvyM9YhQ/5V7J0SVLKYCmWYpQywySSn2v5gg6a/ /JXaLTcA2veUEYFjwvhyUGACy3I0b/Yp/jAguj065SCicPOWj+fIq0bxVDRKPmkPmrwi+ nQmsLYIClTU1Say0Ub1Jo7G3prlQRYhGGNighYSzAiPfRTblRHOLUbiqUEul0jWVaUQ== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1794957989; h=DMARC-Filter:Received:DKIM-Signature:X-Google-DKIM-Signature: X-Forwarded-Encrypted:X-Gm-Message-State:X-Gm-Gg:X-Received:Received: From:To:Cc:Subject:Date:Message-ID:X-Mailer:MIME-Version: Content-Transfer-Encoding; bh=iu1ibECAW7kXktsNmYwPI2w8t5V2InTDz/9qjFJIBRY=; b=pWSAHXnY28yxHq0eFIiXkLUrKWinWVQTYo4rAwkvwlTnwtNgqn6aH6lJYSdrvent3ZgC cepynKPUbk+U+eprFv8+uqFzoPzPfX+TyZ7MyXspfTnalBoEaPswpgLhkz2LDb3dgy7ES I4NvRnQLDu38ZHxxOVjp5pJaBvk/sMBmkdCPwzYeZbgJuIiXp7cQsYd/fXWOqMHfXHAfx BTDoa05v9v08sd3D+rO5xd1YPJ6QHcdnl3y1Ng1bHKzSSwIBj+7//cTqWUrIUF18rFAhc PoSliT+XSBKATHHDy3tuW7K4nc39FzbubqahNHPQX9GehtSeTi2grKYOP7M/+yFo0eQ== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=rMtm7Ijy; arc=none smtp.remote-ip=209.85.221.54 Received: from mail-wr1-f54.google.com (mail-wr1-f54.google.com [209.85.221.54]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 10FFD606A332 for ; Tue, 17 Nov 2026 23:26:27 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 10FFD606A332 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20260707 header.b=rMtm7Ijy Received: by mail-wr1-f54.google.com with SMTP id ffacd0b85a97d-49d64a88222so934169f8f.1 for ; Tue, 17 Nov 2026 15:26:27 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20260707; t=1794957986; x=1795562786; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to:content-type; bh=iu1ibECAW7kXktsNmYwPI2w8t5V2InTDz/9qjFJIBRY=; b=rMtm7IjyQKmPosLTj/7L339bc1Pj3/dNXXH4plgGIeJAz1MCbcalKP2Tvy9WJld7ap s5ayVJ9i3a+a2yoYfEmvUjgjuZpm+5Jy/rUWE5+jEErqugq+LPn1XKLCuMobOaNVQaP4 8ttZE0vOrox7Rbm22lYFQIhqrnClo23RQo4KWTcw2oys85wNnrmbzA3N8TxDoPqaK8sr klDZxJstfN6doXQI+0B66+sfTQRD57rgZK3X3WWCpd4pV4ftbHJ7NFhfJP/rg0MKPhM1 smFCBSLd9b1UNR1T3fYQA7RvVs5tr17PZLB9b9niRw5xh2QryS4Kq8zyfvqccEJ7IFp/ kVGQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20260707; t=1794957986; x=1795562786; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to:content-type; bh=iu1ibECAW7kXktsNmYwPI2w8t5V2InTDz/9qjFJIBRY=; b=Sxq3nRDIEkzbIOOxcOSNh+m2pK8NyRxy3nGfDLp1E60FnTN42q9zCSARxtX8NwwhPG dp524nXT3IoTqodaVsEmWCSJDFZ5iMxU3altqqe4EydlJ4AFghlPfrDaLUvCsR8yHUfl VMcgQRbMVvDnZxXNXkML6eduFcyg/5lQ86sZBEodlOpzupJxurtwDG5qJvpV+3aKc4iK 2mBZQxoBnPeYiDZrC7XNkpD3IUGP6sFXoGYL4DhQYMg/zlOamy6g2hiwtl5dO5cUJBFH k02bZmr+tsvbtRBwZ6sBCTFXB4OfmBfKLy3NqQEYeaoBDqrYbgKY9msQ6xdYwuBSIX0C 3elQ== X-Forwarded-Encrypted: i=1; AL+hErFubWMcYIH/fsfSXpalK3/yI8k7bpoYdO/u+Yv2MPv99Z65rSHAGT+YlyQHBw3imc1jkz1dK29aIiWimG8=@vger.kernel.org X-Gm-Message-State: APuU4Z/0oFZ6BT97DI7K5IoAU5Ys/8sbPOuZ5fTEoCtbQs4MqgXoZeei zdxRZZxBKBdzuR+9cXhj9xXdd/N0WqJ/Sumo+y2a6zd/n6b/5Xw53f3s X-Gm-Gg: AYBFou2lqqLK4JMAh7eF3LhOW1wiK/otvTpFxHWY8NWJV8+u4XV+5124gg0ZNvvrRqI CTY6vpwSW//hDRkAh9QSn8xgEXRptzwlkiVC+z216ire6fFyK1wxgwXEsRiSoe6nPLTJn7nmqwS ik9Tq1vnEHt/mfGKmtv+g2b6GP9sv5U9TUMEXdrinfu7HdDxmzGYKnip7wK+TazykQ+4bEatkY/ vMvKmo3NQIS4fZ/TiJX5upr4GlNlkfazwe4ixW17875aqpt36YXfZMGFxH9GazH7b73XWmARBuY J1TSxu2rXX36rA6ZBkZ7dSNONoShi6+2mircjkmDIJkBf51F/3ggSSbU/Xkv1zKI2OkLqeMC/Bx Bbecemc0OUsaKtzg4HTJ9UhaNDmHfLdBKfaa+pLveTskWTb5FAVntXj44xwn1cCIkd9WCMLPiON +UCwknP8H5OzHizbuTWnG5IU4iQF3OCo8qIbXdvKnSWb62yF1zjBDfzybo+46+nSy9oNKj4INHH FE/vgowhrJyUrLa2JkzibojTtMIckg4kvUx5BQoDDFAbaNdaqoA2zv3oDaxP3rwLUkK0y7U+3cc CDm+H4gh7Lh5Uq0BmMUmAoCHU46Xjp8QCjY= X-Received: by 2002:a05:600c:8717:b0:4bb:5e8c:13bc with SMTP id 5b1f17b1804b1-4bb7da17f77mr13687885e9.7.1794957986220; Tue, 17 Nov 2026 15:26:26 -0800 (PST) Received: from deb05.proceq.com ([213.160.61.66]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-4bb7d2b979bsm20013915e9.11.2026.11.17.15.26.25 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 17 Nov 2026 15:26:25 -0800 (PST) From: Mehmet Fide To: Ping-Ke Shih Cc: Luka Gejak , Bitterblue Smith , linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, mehmet.fide@screeningeagle.com Subject: [PATCH rtw-next v12 0/3] wifi: rtw88: channel switch in AP mode Date: Wed, 18 Nov 2026 00:26:21 +0100 Message-ID: <20261117232624.1956815-1-mehmet.fide@gmail.com> X-Mailer: git-send-email 2.56.0 X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit From: Mehmet Fide An rtw88 AP cannot change its channel: the driver does not announce channel switch support, so hostapd's CHAN_SWITCH is refused and the only way is to tear the AP down. The series fixes the beacon download the reserved page build makes twice, counts a switch down on top of the firmware's beacon page, and times the countdown downloads from the TBTT so that every count goes out on the air. v12 applies on top of patches 1-4 of the firmware recovery fixes [2]; patch 5 of [2] is superseded by commit 3f2238709f5d ("wifi: rtw88: clear RTW_FLAG_RESTARTING on stop and start failure") in rtw-next. v12 was tested with [2] and the mac80211 patch [1] on top, [1] is in mainline now as commit 12f97c692dcb, on a kernel with PROVE_LOCKING, DEBUG_ATOMIC_SLEEP, kmemleak and KFENCE, on an RTL8821CU (two adapters), an RTL8822BU, an RTL8822CU (USB) and an RTL8822CE (PCIe) with hostapd as AP, the beacons sniffed from a second machine, on rtw-next fb51e39dfaea: - the regression suite on the five adapters on 2.4 and 5 GHz: beacons, association, power save, scans, a hardware restart, rebinding, a firmware crash on the RTL8822CE, and 300 switches with counts 2, 5 and 10. The AP switched in 300 of 300 and every count went out in 296; the other four were on 2.4 GHz on the RTL8822BU and the RTL8822CU, which lost 46 % and 2.4 % of their beacons in the beacon tests of the same run. One missing count was the single CSA beacon of a count of 2, and the station lost the AP. In 30 more switches with a count of 2 on that adapter every count went out, and in 29 of 30 with the v12 of before [2]. In two more switches with a count of 2 the station lost the AP although the sniffers heard its single CSA beacon; the same happens with v11. No lockdep report, and no kmemleak report from the drivers - a test build that fails the first download of a countdown on purpose, with counts 2 and 5 on the RTL8821CU, the RTL8822BU and the RTL8822CE: the AP switched in 30 of 30 and every count went out in 25. In 15 more runs each, the v12 of before [2] and this one lost counts in 2 of 15 each. With v11 a count of 2 switched without any CSA beacon in 5 of 5 - the same build holding the first step back by 95 ms: the AP switched in 30 of 30 and every count went out in 27. With v11, held back by 90 to 100 ms, a count of 2 switched without any CSA beacon in 10 of 12 - an IBSS left during its countdown, without [1] and with a monitor interface keeping the radio up, on four adapters: the countdown work stops and a scan works; with v11 the work ran on and every scan was refused - a station interface associated first, an AP started next to it and stopped during a countdown of 50 on the RTL8822CE and the RTL8822CU: the station stayed associated in the 5 runs in which it had associated - an off-channel period of 300 ms during a countdown of 20 on the RTL8821CU: the AP switched in 3 of 3. The beacons after an off-channel period are partly missing also without the series Every count missing in the first three items fell on a TBTT at which neither sniffer heard any beacon, as happens on these adapters without a countdown too. The RTL8822BU and the RTL8822CE ran again on rtw-next badf4c3c7679: - the regression suite on 2.4 and 5 GHz with 36 switches: every count went out, lockdep stayed on, no kmemleak report from the drivers - a firmware crash during a countdown of 40 on the RTL8822CE, the AP alone and next to an associated station interface: no lockdep or DEBUG_ATOMIC_SLEEP report; the AP alone ended on its new channel - a firmware crash with the hardware restart held back by 4 s in a test build, the AP and its interface stopped in between: the restart flag was clear afterwards and the next crash was recovered, 2 of 2 In IBSS a countdown leaves more beacons off the air where the channel is busy; the count goes on after each of them. With 20 s with and without a countdown taking turns on one channel, the beacons that no sniffer heard are, on 5 GHz, 1.9 % and 3.5 % of the countdown of an RTL8821CU and the RTL8822BU against 0.3 % and 0.2 % without one, and none on the RTL8822C; on 2.4 GHz 6.6 to 12.1 % against 2.7 to 7.2 % on the five adapters. An AP shows no such difference. The cause is the beacon function, which rtw_fw_write_data_rsvd_page() switches off for the download: left on for the count steps, the difference is gone on 5 GHz, but one RTL8821CU AP then lost its station in 6 of 110 switches with counts 5 and 10 on 2.4 GHz, and in none of 100 without the change, so the series leaves the download as it is. The TSF stands still for the download as well, 2.8 ms on the USB chips and 0.3 ms on the RTL8822CE, so the beacons of a countdown are about 105 ms apart on USB. Not run for v12: Windows stations. The WoWLAN paths are built but not run: after a suspend the PCIe card of the test board is inaccessible and the USB adapters are probed again. Without the series as well, an IBSS interface stops beaconing after a scan. Patch 1 changed only in its commit message since v6. v12: - 2/3: a failed download of a count is repeated before the next step, and the switch completes only after the count of 1 reached the firmware (Luka). The work steps with the count that ieee80211_beacon_update_cntdwn() returns and no longer calls ieee80211_beacon_cntdwn_is_complete(), which warned when the AP stopped in between (Sashiko) - 2/3: the work never clears csa_vif, and rtw_ops_stop_ap() downloads the page again whenever a station interface stays (Luka) - 2/3: the countdown stops while beaconing is disabled, for an IBSS that is left or an off-channel period, and starts again when it is enabled with the switch still announced (Sashiko) - 2/3: WoWLAN suspend keeps the interface of the countdown and resume starts it again, without iterating the interfaces (Luka) - 2/3: a failed download of the replay after a hardware restart is repeated before the next step - 3/3: each step reads the TSF after its download and the next one runs 10 ms after the first TBTT at least 10 ms away; no step runs less than 5 ms after or 10 ms before a TBTT, the one that finishes the switch included. A late step delays the switch instead of taking a count off the air (Luka) - 3/3: the commit message says which count the first CSA beacon carries (Sashiko) - 1/3: the commit message says why there is no Fixes tag and what mac80211 reports for the double fetch (Sashiko) - rebased on patches 1-4 of [2] v11: - 2/3: the channel_switch_beacon op is gone, the BSS_CHANGED_BEACON path starts every countdown (Luka) - 2/3: rtw_fw_csa_start() does nothing on a device that is not running - 2/3: only the countdown work advances the count. The beacon of the reserved page is fetched as a template while a switch is announced, so the replay after a firmware recovery and the page of the WoWLAN firmware repeat the count that is on the air - 2/3: an AP that stops in its countdown downloads the reserved page again if a station interface stays behind; the downloads the countdown held back were lost for it - 3/3: the first download shares the branch of a late one, and the comment says what the branch catches (Luka) - the beacon interval that stays at 100 TU on the air is fixed by a separate patch (Luka) - rebased on rtw-next v10: - 2/3: rtw_core_stop() clears csa_vif and cancels the countdown work again once it has the mutex back, for a switch started while the mutex was dropped (Luka) - 3/3: the first count is downloaded by the countdown work, 10 ms after the next TBTT, and no longer when mac80211 changes the beacon. My reply on v9 said v10 only drops the back-off; that is not enough on the RTL8822CE, where a TBTT shortly before the download sends no beacon and the next one stays out too, so a count of 2 went out without a CSA beacon (Luka). The switch completes up to one beacon interval later. Ping-Ke's Acked-by and Luka's Reviewed-by are dropped for the changed code - rebased on rtw-next v9: - 2/3: the countdown starts again after a WoWLAN resume that worked, which mac80211 follows with no replay (Luka); Ping-Ke's Acked-by is dropped for the new code - 3/3: Acked-by from Ping-Ke on v8, Reviewed-by from Luka - an IBSS left during its countdown and joined again kept csa_active; that is mac80211's, fixed by a separate patch [1] (Luka) v8: - 2/3: Acked-by from Ping-Ke - 3/3: the TSF read retries once instead of looping, rtw_fw_csa_queue() reads the TSF once also on start, the port 0 comment is gone, empty lines where asked (Ping-Ke) v7: - new patch 3: the countdown downloads are timed from the TSF, 10 ms after each TBTT, so a download that runs late by less than a beacon interval still reaches the firmware before the next beacon; one later than that is followed by its successor at once. Ping-Ke's question on v6: with the absolute due time a late download and its successor could land in one beacon period and leave a count out of the air - patch 3 takes a TBTT within the margin before the start as the one that sent the countdown template: a TBTT between the template download and the first TSF read made the stations see one count twice - patch 2 keeps csa_vif until the beacon after the switch: a TIM update before it fetched one beacon past count 1 and hit the WARN in ieee80211_beacon_update_cntdwn() - rebased on rtw-next v6: - the wiphy work patch of v5 is gone: the countdown work is an ieee80211 delayed work and csa_vif is driver state, both under the driver mutex, so rtw88 takes no wiphy lock anywhere (Ping-Ke) - rtw_core_stop() cancels the countdown work and clears csa_vif, which covers the IPS path and the firmware recovery; the wiphy_lock() in the recovery work is gone (Ping-Ke) - the BSS_CHANGED_BEACON path says why it starts the countdown, the replay after a hardware restart, and stops it when the beacon comes back without a switch announced (Ping-Ke) - the downloads are paced from the first one with an absolute due time. Queued after each download, they drifted by about 10 ms per beacon interval on the ordered mac80211 workqueue; on a count of 50 the AP switched half a second after its station had, and the station re-associated v5: - 2/3 is new: update_beacon_work becomes a wiphy work, so that it can look at the channel switch state under the wiphy lock; it checks RTW_FLAG_RUNNING instead of being cancelled in rtw_core_stop(), which runs without the wiphy lock on the IPS path (Ping-Ke); reverted in v6 - 3/3: rtw_fw_csa_active/start/stop() assert the wiphy lock (Ping-Ke); reverted in v6, they assert the driver mutex - 3/3: hw_scan() takes the mutex with guard() (Ping-Ke) - 3/3: a comment on the association download names the STA+AP combination it skips the download for (Ping-Ke) - the whole set ran on a PROVE_LOCKING kernel without a lockdep report: switches with counts 1 to 100, hostapd stopped and restarted during a countdown, scans during a countdown, a firmware crash during a countdown, three stop/idle/start cycles, IBSS, 50 switches with a station attached, and on the RTL8822CU a station interface associating while the AP interface counted down v4: - 1/2: Reviewed-by from Luka - 2/2: the countdown work is back in the device, initialised once, with csa_vif naming the interface; no interface iteration and no lookup through the reserved page any more (Ping-Ke) - 2/2: the countdown is cancelled before a firmware recovery restarts the hardware, instead of guarding the work with flags (Ping-Ke) - 2/2: the page download on association skips a running countdown, like the TIM update and the PG backup (Luka) - 2/2: the scan refusal comes before the scan offload test, so that firmware without scan offload does not fall back to a software scan during a countdown (Luka) v3: - 1/2: the beacon out-pointer is initialised in the caller (Luka) - 2/2: the countdown work lives in the interface, remove_interface cancels it unconditionally, the queue wrapper and the comments are gone (Ping-Ke) - 2/2: the TIM update and the PG backup on set_key skip the page download while a switch is announced; every beacon fetch advances the countdown (Luka) - 2/2: the commit message names the refused hardware scan (Ping-Ke) v2: - 2/2: a hardware scan is refused while a switch is announced - the rtw89 mention is gone from the cover [1] https://lore.kernel.org/linux-wireless/20261025193615.1123718-1-mehmet.fide@gmail.com/ [2] https://lore.kernel.org/linux-wireless/20261117171003.1840491-1-mehmet.fide@gmail.com/ Mehmet Fide (3): wifi: rtw88: download the beacon the reserved page was built with wifi: rtw88: support channel switch in AP mode wifi: rtw88: time the countdown downloads from the TBTT drivers/net/wireless/realtek/rtw88/fw.c | 182 ++++++++++++++++-- drivers/net/wireless/realtek/rtw88/fw.h | 5 + drivers/net/wireless/realtek/rtw88/mac80211.c | 60 +++++- drivers/net/wireless/realtek/rtw88/main.c | 9 +- drivers/net/wireless/realtek/rtw88/main.h | 5 + drivers/net/wireless/realtek/rtw88/reg.h | 1 + 6 files changed, 237 insertions(+), 25 deletions(-) base-commit: badf4c3c7679871a50cff1150f66e63187201757 prerequisite-patch-id: 61a489b0da7e1d0028cc1c72c0ecd1301f3b8ec7 prerequisite-patch-id: 5040450eb00c500bda0b95bb35bd821721f149ee prerequisite-patch-id: 8c5c1393ce4b56fecf3238b21bd34fcdbae8769a prerequisite-patch-id: 6ecc624d0c38a71c64993f725622e02ae2ad1629 -- 2.56.0