From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Jacky Huang <ychuang3@nuvoton.com>,
Shan-Chun Hung <schung@nuvoton.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Richard Cochran <richardcochran@gmail.com>,
Arnd Bergmann <arnd@arndb.de>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Avi Fishman <avifishman70@gmail.com>,
Tomer Maimon <tmaimon77@gmail.com>,
Tali Perry <tali.perry1@gmail.com>,
Patrick Venture <venture@google.com>,
Nancy Yuen <yuenn@google.com>,
Benjamin Fair <benjaminfair@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Steam Lin <STLin2@winbond.com>,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, openbmc@lists.ozlabs.org,
Miquel Raynal <miquel.raynal@bootlin.com>,
stable@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH v12 00/10] clk: nuvoton: ma35d1: Fix mux parenting and peripheral clock rates
Date: Wed, 18 Nov 2026 17:59:09 +0100 [thread overview]
Message-ID: <20261118-perso-ma35d1-upstream-clk-v12-0-bee2c8dad4e1@bootlin.com> (raw)
I am in possession of an MA35D1 NuMaker board. The SPI controller has
been contributed, but at this stage it does not work with the current
clock driver.
The clock controller registers its muxes with .fw_name parent data,
which requires every internal clock name to be declared in the DT. As
the DT does not declare them, all parent lookups fail: muxes end up
registered as root clocks and most peripherals read a zero rate.
This conversion exposed a first issue with the WDT/WWDT parents which
were actually missing in the clock driver. I am not using these clocks
myself but it is worth fixing.
The second round of reviews raised another problem with the
crystals. HXT and LXT are external crystal oscillators wired on the
board, while HIRC and LIRC are on-chip RC oscillators. HXT was described
whereas LXT was not. The series now also takes the two crystal inputs
from the DT: they get documented in the bindings, described in the
boards and looked up by the driver (with a fallback for backward
compatibility).
Finally, I was still unsatisfied by the clock tree because there were
too many root clocks. Many "gates" were wrongly set aside from the
downstream clocks they would gate, and SYSPLL was simply not parented at
all (?).
The clock tree now looks much more accurate.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Changes in v12:
- Rebased on 7.4-rc2 because of the treewide allocator change, fixed
patch 3.
- Link to v11: https://lore.kernel.org/r/20261118-perso-ma35d1-upstream-clk-v11-0-bd1d1e060926@bootlin.com
Changes in v11:
- Add a patch to fix the CCAP mux bus width.
- Add comments stating that the HXT and LXT IDs are legacy clock IDs.
- Collect R-by tag.
- Dropped the DTS patches from the clock series.
- Link to v10: https://lore.kernel.org/r/20261015-perso-ma35d1-upstream-clk-v10-0-47c97b54a809@bootlin.com
Changes in v10:
- Make sure muxes registration is device managed like all the other clocks.
- Link to v9: https://lore.kernel.org/r/20261015-perso-ma35d1-upstream-clk-v9-0-1f548fa2002e@bootlin.com
Changes in v9:
- Create devm_clk_hw_register_fixed_rate_parent_hw().
- Use the above helper to register SYSPLL.
- Keep hws[HXT] available in the legacy case.
- Propose myself for maintaining this driver.
- Link to v8: https://lore.kernel.org/r/20261004-perso-ma35d1-upstream-clk-v8-0-e1a106a128c0@bootlin.com
Changes in v8:
- Fix an out-of-bound bug (syspll parenting structure was wrongly
defined).
- Make sure HXT_GATE is validated before being reused (and possibly
dereferencced blindly by the core.
- Link to v7: https://lore.kernel.org/r/20261002-perso-ma35d1-upstream-clk-v7-0-cbd991fa6270@bootlin.com
Changes in v7:
- Avoid opencoding core helpers, replace them with existing helpers
(mentioned by Jerome)
- Rebased on top of clk-next since the first patches have been applied
- Link to v6: https://lore.kernel.org/r/20260930-perso-ma35d1-upstream-clk-v6-0-48937ee6c9bb@bootlin.com
Changes in v6:
- Drop the clock output names entirely, they are not relevant.
- Error out when the crystal providers defer probing.
- Make sure gates are correctly parented.
- Make sure SYSPLL is parented.
- Link to v5: https://lore.kernel.org/r/20260929-perso-ma35d1-upstream-clk-v5-0-68533e935ee4@bootlin.com
Changes in v5:
- Fix the bindings wrt HXT and LXT.
- Fix the DT descriptions of HXT and LXT.
- Collect tags.
- Link to v4: https://lore.kernel.org/r/20260925-perso-ma35d1-upstream-clk-v4-0-f3697553391f@bootlin.com
Changes in v4:
- I forgot to bump the clock counter in the driver after adding the two
new clocks in the bindings. Sashiko will keep complaining about the
incoherency though. Since binding and driver changes should be kept
separated, I cannot do both at the same time.
- Link to v3: https://lore.kernel.org/r/20260925-perso-ma35d1-upstream-clk-v3-0-ffbae7e020a8@bootlin.com
Changes in v3:
- Drop the number of clocks from the binding, set it in the driver only
- Split the binding/driver patches completely
- Link to v2: https://lore.kernel.org/r/20260921-perso-ma35d1-upstream-clk-v2-0-209fd32a8b00@bootlin.com
Changes in v2:
- New patch 1/3: register the missing WDT/WWDT parent clocks
- New patch 3/3: harden the code
- Link to v1: https://lore.kernel.org/r/20260813-perso-ma35d1-upstream-clk-v1-1-e78e5e6172ea@bootlin.com
---
Miquel Raynal (10):
dt-bindings: clock: ma35d1: Mark HXT and LXT legacy
clk: nuvoton: ma35d1: Use clk_hw pointers as mux parents
clk: nuvoton: ma35d1: Avoid possible error pointer dereferencing
clk: nuvoton: ma35d1: Retrieve HXT/LXT from DT when possible
clk: nuvoton: ma35d1: Reparent the gates correctly
clk: nuvoton: ma35d1: Use device managed helpers for fixed rate clocks
clk: Create devm_clk_hw_register_fixed_rate_parent_hw()
clk: nuvoton: ma35d1: Reparent SYSPLL correctly
clk: nuvoton: ma35d1: Fix CCAP muxes bus width
MAINTAINERS: Add myself as Nuvoton MA35D1 clock controller
MAINTAINERS | 8 +
drivers/clk/nuvoton/clk-ma35d1-divider.c | 3 +
drivers/clk/nuvoton/clk-ma35d1-pll.c | 3 +
drivers/clk/nuvoton/clk-ma35d1.c | 716 +++++++++----------------
include/dt-bindings/clock/nuvoton,ma35d1-clk.h | 2 +
include/linux/clk-provider.h | 13 +
6 files changed, 281 insertions(+), 464 deletions(-)
---
base-commit: 7475ea8b58616b33c04afb976cf0fbaad9dd63fb
change-id: 20260813-perso-ma35d1-upstream-clk-65cacfc1a86b
Best regards,
--
Miquel Raynal <miquel.raynal@bootlin.com>
next reply other threads:[~2026-11-18 17:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 16:59 Miquel Raynal [this message]
2026-11-18 16:59 ` [PATCH v12 01/10] dt-bindings: clock: ma35d1: Mark HXT and LXT legacy Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 02/10] clk: nuvoton: ma35d1: Use clk_hw pointers as mux parents Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 03/10] clk: nuvoton: ma35d1: Avoid possible error pointer dereferencing Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 04/10] clk: nuvoton: ma35d1: Retrieve HXT/LXT from DT when possible Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 05/10] clk: nuvoton: ma35d1: Reparent the gates correctly Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 06/10] clk: nuvoton: ma35d1: Use device managed helpers for fixed rate clocks Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 07/10] clk: Create devm_clk_hw_register_fixed_rate_parent_hw() Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 08/10] clk: nuvoton: ma35d1: Reparent SYSPLL correctly Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 09/10] clk: nuvoton: ma35d1: Fix CCAP muxes bus width Miquel Raynal
2026-11-18 16:59 ` [PATCH v12 10/10] MAINTAINERS: Add myself as Nuvoton MA35D1 clock controller Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118-perso-ma35d1-upstream-clk-v12-0-bee2c8dad4e1@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=STLin2@winbond.com \
--cc=andrew@codeconstruct.com.au \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=jbrunet@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=openbmc@lists.ozlabs.org \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=schung@nuvoton.com \
--cc=stable@vger.kernel.org \
--cc=tali.perry1@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tmaimon77@gmail.com \
--cc=venture@google.com \
--cc=ychuang3@nuvoton.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®