On Wed, Nov 18, 2026 at 02:25:25PM +0800, Mason Huo wrote: > Convert the starfive,kcs-bmc binding to DT schema format. This is not a conversion since you are not deleting anything? > > Signed-off-by: Mason Huo > --- > .../bindings/ipmi/starfive,kcs-bmc.yaml | 53 +++++++++++++++++++ > 1 file changed, 53 insertions(+) > create mode 100644 Documentation/devicetree/bindings/ipmi/starfive,kcs-bmc.yaml > > diff --git a/Documentation/devicetree/bindings/ipmi/starfive,kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/starfive,kcs-bmc.yaml > new file mode 100644 > index 000000000000..2cb91d321a32 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ipmi/starfive,kcs-bmc.yaml > @@ -0,0 +1,53 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/ipmi/starfive,kcs-bmc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: StarFive BMC KCS Devices > + > +maintainers: > + - Mason Huo > + > +description: > + The StarFive BMC SoCs use Keyboard-Controller-Style (KCS) interfaces on > + the eSPI bus for in-band IPMI communication with their host. The KCS > + channels are part of a Super I/O (SIO) block and each channel occupies a > + 0x100 byte register window, starting at offset 0x200 of the SIO register > + space. A channel is identified by its register offset and the > + "starfive,sio-id" of the parent SIO node. Where is the binding for the parent SIO node? Hard to review this without that I think. > + > +properties: > + compatible: > + enum: > + - starfive,jhb100-kcs-bmc > + > + reg: > + maxItems: 1 > + > + interrupts: > + items: > + - description: KCS channel interrupt > + - description: eSPI bus reset de-assertion interrupt > + > + interrupt-names: > + items: > + - const: kcs > + - const: espi_rst No need to have "rst" since this is a reset by nature ;) > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + > +additionalProperties: false > + > +examples: > + - | > + kcs@200 { s/kcs/ipmi/? > + compatible = "starfive,jhb100-kcs-bmc"; > + reg = <0x200 0x100>; > + interrupts = <282>, <57>; > + interrupt-names = "kcs", "espi_rst"; > + }; > -- > 2.50.1 >