mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: James Hilliard <james.hilliard1@gmail.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
	 Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	 Thomas Gleixner <tglx@kernel.org>,
	 "Artem B. Bityuckiy" <dedekind@infradead.org>
Cc: linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	 James Hilliard <james.hilliard1@gmail.com>
Subject: [PATCH v2] mtd: rawnand: abort BBT creation on scan failure
Date: Wed, 18 Nov 2026 10:37:28 -0700	[thread overview]
Message-ID: <20261118-submit-rawnand-bbt-scan-error-v1-v2-1-c7b71dd22ad6@gmail.com> (raw)

A non-ECC error reading a factory bad block marker from OOB stops the
scan. check_create() ignores the error and can write the partial table
to flash as both the primary and the mirror. Both copies then list
unscanned factory-bad blocks as good.

Return the scan error before setting the table versions or writing
either copy.

Fixes: eeada24da8bd ("[MTD] NAND: Read only OOB bytes during bad block scan")
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
---
Changes in v2:
- Explain how a partial scan can record bad blocks as good on flash.
- Link to v1: https://patch.msgid.link/20261103-submit-rawnand-bbt-scan-error-v1-v1-1-0bef8334198c@gmail.com
---
 drivers/mtd/nand/raw/nand_bbt.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c
index 93f162805f31..3ca1d7fe573f 100644
--- a/drivers/mtd/nand/raw/nand_bbt.c
+++ b/drivers/mtd/nand/raw/nand_bbt.c
@@ -1006,8 +1006,11 @@ static int check_create(struct nand_chip *this, uint8_t *buf,
 				continue;
 
 			/* Create the table in memory by scanning the chip(s) */
-			if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
-				create_bbt(this, buf, bd, chipsel);
+			if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY)) {
+				res = create_bbt(this, buf, bd, chipsel);
+				if (res)
+					return res;
+			}
 
 			td->version[i] = 1;
 			if (md)

---
base-commit: 292f737382d3913d0d9addf220b7170fedd7a04f
base-tree: git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next
change-id: 20261103-submit-rawnand-bbt-scan-error-v1-1183d881e5b2

Best regards,
--  
James Hilliard <james.hilliard1@gmail.com>


                 reply	other threads:[~2026-11-18 17:37 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118-submit-rawnand-bbt-scan-error-v1-v2-1-c7b71dd22ad6@gmail.com \
    --to=james.hilliard1@gmail.com \
    --cc=dedekind@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=tglx@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®