mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Youling Tang <youling.tang@linux.dev>
To: Namjae Jeon <linkinjeon@kernel.org>,
	Sungjong Seo <sj1557.seo@samsung.com>
Cc: Yuezhang Mo <yuezhang.mo@sony.com>,
	Chi Zhiling <chizhiling@163.com>,
	exfat@lists.linux.dev, linux-kernel@vger.kernel.org,
	youling.tang@linux.dev, Youling Tang <tangyouling@kylinos.cn>
Subject: [PATCH v2] exfat: hold s_lock for cluster-chain updates in __exfat_cont_expand()
Date: Wed, 18 Nov 2026 09:58:02 +0800	[thread overview]
Message-ID: <20261118015802.899847-1-youling.tang@linux.dev> (raw)

From: Youling Tang <tangyouling@kylinos.cn>

__exfat_cont_expand() allocates clusters, appends them to the FAT chain
and updates ei->start_clu, ei->flags and i_blocks without holding
sbi->s_lock.  Readers such as writeback call exfat_map_cluster() with
s_lock held but without inode_lock, so they are not serialized against
the expansion and can observe the chain metadata mid-update.

Hold s_lock around the cluster allocation, chain append and i_blocks
update.  This nests inside the invalidate_lock held by
exfat_cont_expand(), matching the order used by exfat_truncate().  i_size
is published via exfat_pagecache_isize_extended(), which takes the
straddling folio lock; since writeback takes folio lock -> s_lock, this
must happen after s_lock is released to avoid inverting the lock order.
i_blocks is therefore updated first, under s_lock, which also ensures a
reader never sees i_size beyond the allocated chain.

Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
---
v2: rebase onto exfat/dev and adapt to __exfat_cont_expand().

 fs/exfat/file.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/fs/exfat/file.c b/fs/exfat/file.c
index 9dfd99ad9265..c7991e98a07a 100644
--- a/fs/exfat/file.c
+++ b/fs/exfat/file.c
@@ -105,6 +105,7 @@ static int __exfat_cont_expand(struct inode *inode, loff_t size)
 	if (ret)
 		return ret;
 
+	mutex_lock(&sbi->s_lock);
 	num_clusters = exfat_bytes_to_cluster(sbi, exfat_ondisk_size(inode));
 	/* integer overflow is already checked in inode_newsize_ok(). */
 	new_num_clusters = exfat_bytes_to_cluster_round_up(sbi, size);
@@ -116,7 +117,7 @@ static int __exfat_cont_expand(struct inode *inode, loff_t size)
 		exfat_chain_set(&clu, ei->start_clu, num_clusters, ei->flags);
 		ret = exfat_find_last_cluster(sb, &clu, &last_clu);
 		if (ret)
-			return ret;
+			goto unlock;
 
 		clu.dir = last_clu + 1;
 	} else {
@@ -130,7 +131,7 @@ static int __exfat_cont_expand(struct inode *inode, loff_t size)
 	ret = exfat_alloc_cluster(inode, new_num_clusters - num_clusters,
 			&clu, inode_needs_sync(inode), false);
 	if (ret)
-		return ret;
+		goto unlock;
 
 	/* Append new clusters to chain */
 	if (num_clusters) {
@@ -147,15 +148,19 @@ static int __exfat_cont_expand(struct inode *inode, loff_t size)
 	ei->flags = clu.flags;
 
 out:
+	inode->i_blocks = round_up(size, sbi->cluster_size) >> 9;
 	inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode));
+	mutex_unlock(&sbi->s_lock);
+
 	/*
 	 * When extending file size, call exfat_pagecache_isize_extended()
 	 * to update i_size and ensure the straddling folio is properly
 	 * marked RO so page_mkwrite() is called and post-EOF area is zeroed.
+	 *
+	 * It takes the folio lock; call it without s_lock (writeback uses
+	 * folio lock -> s_lock).
 	 */
 	exfat_pagecache_isize_extended(inode, oldsize, size);
-
-	inode->i_blocks = round_up(size, sbi->cluster_size) >> 9;
 	mark_inode_dirty(inode);
 
 	if (IS_SYNC(inode))
@@ -165,7 +170,10 @@ static int __exfat_cont_expand(struct inode *inode, loff_t size)
 
 free_clu:
 	exfat_free_cluster(inode, &clu);
-	return -EIO;
+	ret = -EIO;
+unlock:
+	mutex_unlock(&sbi->s_lock);
+	return ret;
 }
 
 static int exfat_cont_expand(struct inode *inode, loff_t size)
-- 
2.43.0


                 reply	other threads:[~2026-11-18  1:58 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118015802.899847-1-youling.tang@linux.dev \
    --to=youling.tang@linux.dev \
    --cc=chizhiling@163.com \
    --cc=exfat@lists.linux.dev \
    --cc=linkinjeon@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sj1557.seo@samsung.com \
    --cc=tangyouling@kylinos.cn \
    --cc=yuezhang.mo@sony.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®