From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=pass header.oldest-pass=0 smtp.remote-ip=40.107.75.129 ARC-Seal: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=pass; t=1794978800; b=xAjw8C+JAyTs2EG5bgfCxcxB+hEXUddWAicxZr1XY/L2FmYSGn17LTCQJXhdqaaLJ/Dq QPq6c++2gKV7DEYNitiF4AMlniTtxo0b43Aiqd5aXVFurYz5SMNKOGqINB3MT5rjH4+Tz EBJisWUnW00B3PzrjgoRgVg4zQA3zZfXBKR1n/ZWhAtP/z6UabghaFebQpKu9W36wDwMg Af4buHe4hmGH+6fywkaL6ih0iuVbxK93x8YKWhXXNlcepkwAQ/JPuHlBOAjGEUT0Wx2cO x5VWIrBmEOrO8MeBGVUdkbsWrKnM0OuVpXG2Nz80NAF2pqVg9+GCSuZV4104zUYI60Q== ARC-Message-Signature: i=2; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1794978800; h=DMARC-Filter:Received:Received:X-MS-Exchange-Authentication-Results: Received-SPF:Received:Received:From:To:Cc:Subject:Date:Message-ID: X-Mailer:In-Reply-To:References:MIME-Version: Content-Transfer-Encoding:X-EOPAttributedMessage: X-MS-PublicTrafficType:X-MS-TrafficTypeDiagnostic:Content-Type: X-MS-Office365-Filtering-Correlation-Id:X-MS-Exchange-SenderADCheck: X-MS-Exchange-AntiSpam-Relay:X-Microsoft-Antispam: X-Microsoft-Antispam-Message-Info:X-Forefront-Antispam-Report: X-MS-Exchange-AntiSpam-MessageData-ChunkCount: X-MS-Exchange-AntiSpam-MessageData-0:X-OriginatorOrg: X-MS-Exchange-CrossTenant-OriginalArrivalTime: X-MS-Exchange-CrossTenant-Network-Message-Id: X-MS-Exchange-CrossTenant-Id: X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: X-MS-Exchange-CrossTenant-AuthSource:X-MS-Exchange-CrossTenant-AuthAs: X-MS-Exchange-CrossTenant-FromEntityHeader: X-MS-Exchange-Transport-CrossTenantHeadersStamped; bh=EKVUUTrdI3MDIFQ8ua+A0rrsK9fmTpO/1W4fo+9P2ew=; b=4w386xiKAPpNCFLFY1QWt3Yz8yvuSeqh3BAkOTaMvVdXfeh+C7a3AfozEXnf0XP9RLmi bGm+MkehOkZrZChpIAgcfHvafl6occirMzQSKa1amVhOeplshMaemTLln2fTZbjtgexA+ qJvqg1jC7yrF3XCF4EMRbX58iqDV5KhLeki/GyhpOg3Y0I5OqM9RNnQXLqOWUF+QpYfXC 6bHn/+oGpSoc28Pl37731xSzV0yi98kbD25XgElpgl2YgYAeGMthWxInrboiMHXWu4XIV fS/OCntDbIy3VOlLopaPui6+bTQJ5GVeh+CK3dUPJUqhkW6CfdVpe2qgmi8NjEcXSiw== ARC-Authentication-Results: i=2; smtp.subspace.kernel.org; dmarc=none header.from=cixtech.com; spf=pass smtp.mailfrom=cixtech.com; arc=pass header.oldest-pass=0 smtp.remote-ip=40.107.75.129 Received: from OS8PR02CU002.outbound.protection.outlook.com (mail-japanwestazon11022129.outbound.protection.outlook.com [40.107.75.129]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange ECDHE (secp384r1) server-signature ECDSA (prime256v1) server-digest SHA256) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 4DA58606A31C; Wed, 18 Nov 2026 05:13:18 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 4DA58606A31C Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=cixtech.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=cixtech.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=VnEuEqRfvxHmkZcFUvMhoUM2uWxWuo3jm9FjQz6sZX73xA8470WRf44E57ffRjCeO/umVIDPVjwWIYTXTqV9v0NKwbsM3NSZqapq/lYxd8PC9GZZRkq/TV/hOvbHWlqgfg7jdcL2sxft2uJo84GDNotmoZQLhZlO6Wk1RPnTLQNKBq/czdsnAWo6yrkbuJkiwFQa0XRdqgbL22NHZXb1OPbtHNkPxu6lz1b7VlLygBQ2qGfv66JRxiB7mGQtlelvMd8SpDTg8FZPB8ajcU3mscI8SN0KnTAsy4HV8Ja82n3SF+dhBym1chPlG/1MbDFVv0kSL6FDdq406j4PpP+Yyw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=EKVUUTrdI3MDIFQ8ua+A0rrsK9fmTpO/1W4fo+9P2ew=; b=cHhA2ddnLWWgKxoYKpzUcotcpC5tzBTEwFXQ5OaJ1Xci+1Fh7MvxYeCmKuM0r7HNuReT4GULqWn8Nfw7hwi1VW+APY9DbGP07eypeF4w9TWvlaqETqHxjchhmTDxR+Q4vSHi/JJ94wcOJ77DsEhcDA6FR0ce8pSECmV1x0szbOGMWr0OQPvNHAGKBgEIBItdBqxtjxfSZLW3+2Jfj2hym/uSYFch7yGqjxnuqabXSj5VkBlbFx9najHeDL4E+YxKoHXbqMvoXMLU1Q+l3HU30DyORUCJSx54SuCQKGC7R/UmLleYuYErX7o1HVU23OhOJuDJajbTHogobSoInPcNXg== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 222.71.101.198) smtp.rcpttodomain=cixtech.com smtp.mailfrom=cixtech.com; dmarc=bestguesspass action=none header.from=cixtech.com; dkim=none (message not signed); arc=none (0) Received: from SI2PR01CA0025.apcprd01.prod.exchangelabs.com (2603:1096:4:192::10) by PUZPR06MB6188.apcprd06.prod.outlook.com (2603:1096:301:116::7) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.639.8; Wed, 18 Nov 2026 05:13:15 +0000 Received: from SG1PEPF000082E3.apcprd02.prod.outlook.com (2603:1096:4:192:cafe::72) by SI2PR01CA0025.outlook.office365.com (2603:1096:4:192::10) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.21.615.14 via Frontend Transport; Wed, 18 Nov 2026 05:13:15 +0000 X-MS-Exchange-Authentication-Results: mx.microsoft.com 1; spf=pass (sender IP is 222.71.101.198) smtp.mailfrom=cixtech.com; dkim=none (message not signed) header.d=none;dmarc=bestguesspass action=none header.from=cixtech.com; Received-SPF: Pass (protection.outlook.com: domain of cixtech.com designates 222.71.101.198 as permitted sender) receiver=protection.outlook.com; client-ip=222.71.101.198; helo=smtprelay.cixcomputing.com; pr=C Received: from smtprelay.cixcomputing.com (222.71.101.198) by SG1PEPF000082E3.mail.protection.outlook.com (10.167.240.6) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.21.639.5 via Frontend Transport; Wed, 18 Nov 2026 05:13:14 +0000 Received: from gary-System-Product-Name (unknown [172.16.66.27]) by smtprelay.cixcomputing.com (Postfix) with ESMTPSA id CE18640920E1; Wed, 18 Nov 2026 13:13:13 +0800 (CST) From: Gary Yang To: Greg Kroah-Hartman , Heikki Krogerus , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Fugang Duan , linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: cix-kernel-upstream@cixtech.com, Gary Yang Subject: [PATCH v6 2/2] usb: typec: add CIX Type-C PD controller driver Date: Wed, 18 Nov 2026 13:13:13 +0800 Message-ID: <20261118051313.3634833-3-gary.yang@cixtech.com> X-Mailer: git-send-email 2.50.1 In-Reply-To: <20261118051313.3634833-1-gary.yang@cixtech.com> References: <20261118051313.3634833-1-gary.yang@cixtech.com> X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SG1PEPF000082E3:EE_|PUZPR06MB6188:EE_ Content-Type: text/plain X-MS-Office365-Filtering-Correlation-Id: cd66612c-9421-4c2f-55db-08df4532a658 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0;ARA:13230040|23010399003|36860700016|82310400026|1800799024|376014|22082099003|18092099006|6133799003|18002099003|3023799007|5023799004|56012099006|261021135927099003|261028144727099003|261102123227099003|261022115727099003|261022113327099003|261022075727099003|261022105027099003|261021130227099003|261021121427099003|261021123027099003|261021133027099003|261026130827099003|261009223027099003|261026121527099003|261026140227099003|261026135527099003|10067099003; X-Microsoft-Antispam-Message-Info: /p8gCrmpeLj3kR0VXMdjvUYNxFhgFVga0j/an4gtThIIZyzsWyvDU/W+NlfIX1Xanv1YidRTgB14HjFGT2rcnAoOF08jqm1vNjGv6xYwGtd5lAKA2O2dGgvOeVTZ61TSpgRQ8NC7QOdAEcdsWN5xe/s/tTJsbxN2HQmhAPhxTTdhPeMGu1Fr40eprR8CS3q7gJRY4s7yxPRKboRQnRBbG1vJnol/76gkAinEMTCRoY+jfi9iy7yqFoxSspi/9FkjkrTZRx4rXpEKgY4naWCo4orGyF3XjsRC/oP9f+YSO7it5Jq1cZFZ+NRO8szaP8nRJpZqtmXR2SDVVaM8D3P8uiO/kLCniuOmND3YP/mm79r/PslzUSlnQGuSEn3slzA8YwL6y/MwkbHYnZA+1gT6qFGp+Yi8S/BAS3TFpqSQKQaKKDsEs2gOzEbe+c9vr5u9TsNEeE/w4crhDM4GuO4HdzgDOHeg/vTiZ9gJwko6QDcTL9AxxvdsS8ECWITdJ337dVfm1cKSJzKii6RBWt3bgcRtAQ7QPlqeiGcDuWM2OvfLGYJtdrnjFY4i7qfbbwCN52ac/LdpxKDO4GHGUJO+gYkYklRsyM36Kq2s0xOFsa0qqWty9fD+eb76sWKpqp64Xftp1+ri9V5JyFLHTK4Oi7wUtXCJdjpDwRODOGFwMfaKWTnK4/FvC+lJO+OjhzwptljAAtMCZB09X6icdTKHUg== X-Forefront-Antispam-Report: CIP:222.71.101.198;CTRY:CN;LANG:en;SCL:1;SRV:;IPV:NLI;SFV:NSPM;H:smtprelay.cixcomputing.com;PTR:InfoDomainNonexistent;CAT:NONE;SFS:(13230040)(23010399003)(36860700016)(82310400026)(1800799024)(376014)(22082099003)(18092099006)(6133799003)(18002099003)(3023799007)(5023799004)(56012099006)(261021135927099003)(261028144727099003)(261102123227099003)(261022115727099003)(261022113327099003)(261022075727099003)(261022105027099003)(261021130227099003)(261021121427099003)(261021123027099003)(261021133027099003)(261026130827099003)(261009223027099003)(261026121527099003)(261026140227099003)(261026135527099003)(10067099003);DIR:OUT;SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: LZUssc69y7BeV6bFpDRdf2tdXu/67oa5xLUaJvQ9Ni0+YA1HI5uyomgjWfHO6sbkwvnQVDYUpuNlzW0/vV9CWp8vpg0sIRZKrV2JxzJscLwLYyibplGqOC8a2rioeu5m9XA7FBaYJoX2PWQ35j/2GrlJt93CST1Vf3SenV4Xq31Ozl95fnoxaorLNYCwQkxUkUuYZAz8DkkOCsnF9C9eEJMlTveJzmQsezn6bOoJaNfSAUp2WNn23FMTXJ25qwnrpyTtj6D9rBYCWHKCpFynlz4Z6bvCw4wvv+dGuOx26ijqeaShrkwk7jvqBDh4YIJbtRRP9WG/sP3BKzQdaxrqcsXgIYYEoTx4oRZ8BjKvBoHkIyDwXt5xTvMr3dLG/4hLp9X1Vj7Z/GReYvpPgaULT3kSWqCxmnuLkJ4pPTC0AVC5TpoxZtvR4+sJqVaW4KA3 X-OriginatorOrg: cixtech.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 18 Nov 2026 05:13:14.8887 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: cd66612c-9421-4c2f-55db-08df4532a658 X-MS-Exchange-CrossTenant-Id: 0409f77a-e53d-4d23-943e-ccade7cb4811 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=0409f77a-e53d-4d23-943e-ccade7cb4811;Ip=[222.71.101.198];Helo=[smtprelay.cixcomputing.com] X-MS-Exchange-CrossTenant-AuthSource: SG1PEPF000082E3.apcprd02.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: PUZPR06MB6188 Add a Type-C PD controller driver for CIX platforms. The Realtek RTS5453H is the first supported device. The controller runs the Type-C and PD state machines in its firmware. The register addresses are agreed between CIX and the controller vendor and are configured into that firmware, so the host interface is not specific to the RTS5453H: further register-compatible controllers can be supported by the same driver, each with its own compatible string. The host reads the decoded port status from the data status register (0x5F) and acknowledges port and HPD events through the data control register (0x50). The driver translates that into Type-C class notifications and drives the platform PHY's orientation switch and mode mux for the DisplayPort alternate mode, and the platform USB role switch for the negotiated data role. Signed-off-by: Gary Yang --- MAINTAINERS | 7 + drivers/usb/typec/Kconfig | 13 + drivers/usb/typec/Makefile | 1 + drivers/usb/typec/cix_pd.c | 774 +++++++++++++++++++++++++++++++++++++ 4 files changed, 795 insertions(+) create mode 100644 drivers/usb/typec/cix_pd.c diff --git a/MAINTAINERS b/MAINTAINERS index 93abbb315065..bd99313bf91d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6522,6 +6522,13 @@ M: Satish Kharat S: Supported F: drivers/infiniband/hw/usnic/ +CIX USB TYPE-C PD CONTROLLER +M: Gary Yang +L: linux-usb@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/usb/realtek,rts5453h.yaml +F: drivers/usb/typec/cix_pd.c + CLANG CONTEXT ANALYSIS M: Marco Elver R: Bart Van Assche diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig index 2f80c2792dbd..4d62f5deeeba 100644 --- a/drivers/usb/typec/Kconfig +++ b/drivers/usb/typec/Kconfig @@ -110,6 +110,19 @@ config TYPEC_WUSB3801 If you choose to build this driver as a dynamically linked module, the module will be called wusb3801.ko. +config TYPEC_CIX_PD + tristate "CIX Type-C PD controller driver" + depends on I2C + depends on USB_ROLE_SWITCH + depends on ARCH_CIX || COMPILE_TEST + select REGMAP_I2C + help + Say Y or M here if your system has a CIX Type-C PD controller. + This driver currently supports the Realtek RTS5453H controller. + + If you choose to build this driver as a dynamically linked module, the + module will be called cix_pd.ko. + source "drivers/usb/typec/mux/Kconfig" source "drivers/usb/typec/altmodes/Kconfig" diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile index 8a6a1c663eb6..bb3f3139fd7e 100644 --- a/drivers/usb/typec/Makefile +++ b/drivers/usb/typec/Makefile @@ -11,4 +11,5 @@ obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o obj-$(CONFIG_TYPEC_RT1719) += rt1719.o obj-$(CONFIG_TYPEC_WUSB3801) += wusb3801.o +obj-$(CONFIG_TYPEC_CIX_PD) += cix_pd.o obj-$(CONFIG_TYPEC) += mux/ diff --git a/drivers/usb/typec/cix_pd.c b/drivers/usb/typec/cix_pd.c new file mode 100644 index 000000000000..4855c04489f9 --- /dev/null +++ b/drivers/usb/typec/cix_pd.c @@ -0,0 +1,774 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2025 Cix Technology Group Co., Ltd. + * + * Driver for the CIX Type-C PD controller. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RTS_DATA_CONTROL 0x50 +#define I2C_INT_ACK_BIT BIT(2) +#define HPD_IRQ_ACK BIT(5) +#define RTS_DATA_STATUS 0x5F +/* byte 1 */ +#define CONNECTION_ORIENTATION BIT(1) +#define USB2_CONNECTION BIT(4) +#define USB3_2_CONNECTION BIT(5) +#define USB_DATA_ROLE BIT(7) +/* byte 2 */ +#define DP_CONNECTION BIT(0) +#define DP_SOURCE_SINK BIT(1) +#define DEBUG_ACCESSORY_ATTACHED BIT(4) +#define HPD_IRQ BIT(6) +#define HPD_STATE BIT(7) +/* byte 3 */ +#define POWER_SOURCE BIT(0) +#define POWER_SINK BIT(1) +#define POWER_MASK 3 + +#define DATA_STATUS_COUNT 6 + +struct cix_pd { + struct device *dev; + struct regmap *regmap; + struct mutex lock; /* device lock */ + int id; + u8 data_status[DATA_STATUS_COUNT]; + u8 prev_status[DATA_STATUS_COUNT]; + bool status_valid; + struct typec_displayport_data dp_data; + struct typec_mux_state state; + struct typec_capability caps; + struct typec_mux *mux; + struct usb_role_switch *role_sw; + struct typec_altmode *port_altmode; + struct typec_altmode *partner_altmode; + struct typec_port *port; + enum usb_role role; + enum typec_orientation orientation; + unsigned long mode; + u32 hpd_status; + struct typec_partner *partner; + struct typec_partner_desc desc; +}; + +static int cix_pd_block_read(struct cix_pd *rts, u8 reg, void *val, size_t len) +{ + return regmap_bulk_read(rts->regmap, reg, val, len); +} + +static int cix_pd_block_write(struct cix_pd *rts, u8 reg, + const void *val, size_t len) +{ + return regmap_bulk_write(rts->regmap, reg, val, len); +} + +static const struct regmap_config cix_pd_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x7F, +}; + +static const char *const dp_only_mode = "Alt Mode:DP"; +static const char *const dp_usb_mode = "Alt Mode:DP + USB"; +static const char *const usb_mode = "Alt Mode:USB"; + +static const char *const power_source = "power source"; +static const char *const power_sink = "power sink"; + +static const char *const orientation_normal = "orientation normal"; +static const char *const orientation_reverse = "orientation reverse"; + +static const char *const data_host = "usb host"; +static const char *const data_device = "usb device"; + +static const char *cix_pd_pwr_role_str(const struct cix_pd *rts) +{ + switch (rts->data_status[3] & POWER_MASK) { + case POWER_SOURCE: + return power_source; + case POWER_SINK: + return power_sink; + default: + return "unknown"; + } +} + +/* + * The controller negotiates the DisplayPort alternate mode autonomously, + * so the capabilities below describe the fixed set supported by the + * platform DP output: a receptacle exposing DFP_D with pin assignments + * C, D and E. + */ +#define CIX_PD_DP_PIN_ASSIGN (BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D) | \ + BIT(DP_PIN_ASSIGN_E)) + +static const struct typec_altmode_desc cix_pd_dp_port_altmode = { + .svid = USB_TYPEC_DP_SID, + .mode = USB_TYPEC_DP_MODE, + .vdo = DP_CAP_DFP_D | DP_CAP_RECEPTACLE | + (CIX_PD_DP_PIN_ASSIGN << 8), +}; + +static const struct typec_altmode_desc cix_pd_dp_partner_altmode = { + .svid = USB_TYPEC_DP_SID, + .mode = USB_TYPEC_DP_MODE, + .vdo = DP_CAP_UFP_D | DP_CAP_RECEPTACLE | + (CIX_PD_DP_PIN_ASSIGN << 16), + .mode_selection = true, +}; + +/* + * typec_altmode_update_active() takes a reference to the alternate mode + * driver's module when the mode is activated and drops it when the mode is + * deactivated, but only while a driver is bound. Report the mode as active + * only after a driver has bound: activating it earlier would make the later + * deactivation drop a reference that was never taken. The port state, which + * is what drives the DisplayPort output on this platform, is programmed + * through the mux regardless. + * + * The mode device lock keeps the check consistent with driver binding and + * with typec_remove(), which reports the mode inactive when a driver + * unbinds. + */ +static void cix_pd_altmode_set_active(struct cix_pd *typec, bool active) +{ + struct typec_altmode *alt = typec->partner_altmode; + struct device *alt_dev; + + if (!alt) + return; + + alt_dev = &alt->dev; + device_lock(alt_dev); + if (!active || device_is_bound(alt_dev)) + typec_altmode_update_active(alt, active); + device_unlock(alt_dev); +} + +static int cix_pd_typec_port_update(struct cix_pd *typec, bool force) +{ + struct typec_displayport_data *dp_data = &typec->dp_data; + enum typec_orientation orientation; + enum usb_role role; + bool usb2, usb3, dp, connected, dev_role; + int ret, err; + + usb2 = typec->data_status[1] & USB2_CONNECTION; + usb3 = typec->data_status[1] & USB3_2_CONNECTION; + dp = typec->data_status[2] & DP_CONNECTION; + + /* + * Debug accessories are not supported, so they are reported as + * disconnected instead of being passed on to the framework. + */ + if (typec->data_status[2] & DEBUG_ACCESSORY_ATTACHED) { + dev_err(typec->dev, + "debug accessory mode not supported, try another usb cable\n"); + connected = false; + } else { + connected = usb2 || usb3 || dp; + } + + if (!connected) + orientation = TYPEC_ORIENTATION_NONE; + else if (typec->data_status[1] & CONNECTION_ORIENTATION) + orientation = TYPEC_ORIENTATION_REVERSE; + else + orientation = TYPEC_ORIENTATION_NORMAL; + + /* + * The controller keeps reporting the same orientation when a sibling + * port raises the shared interrupt, and the Type-C class emits an + * event for every call, so the switch is only programmed again when + * the orientation changed or after system resume. + */ + if (force || typec->orientation != orientation) { + ret = typec_set_orientation(typec->port, orientation); + if (ret) + return ret; + typec->orientation = orientation; + } + + /* + * The controller reports the data role whenever a cable is attached, + * including DisplayPort-only configurations where no USB data role is + * available. Keep the port's data role in sync independently of the + * USB role switch. + */ + dev_role = typec->data_status[1] & USB_DATA_ROLE; + if (connected) + typec_set_data_role(typec->port, + dev_role ? TYPEC_DEVICE : TYPEC_HOST); + + if (!connected || !(usb2 || usb3)) + role = USB_ROLE_NONE; + else if (dev_role) + role = USB_ROLE_DEVICE; + else + role = USB_ROLE_HOST; + + if (force || typec->role != role) { + err = 0; + if (typec->role_sw) { + err = usb_role_switch_set_role(typec->role_sw, role); + if (err) + dev_err(typec->dev, + "typec port(%d): failed to set USB role: %d\n", + typec->id, err); + } + + /* Only cache the role once the switch accepted it. */ + if (!err) + typec->role = role; + } + + if ((typec->data_status[3] & POWER_MASK) == POWER_SOURCE) { + typec_set_pwr_role(typec->port, TYPEC_SOURCE); + } else if ((typec->data_status[3] & POWER_MASK) == POWER_SINK) { + typec_set_pwr_role(typec->port, TYPEC_SINK); + } else { + dev_dbg(typec->dev, "typec port(%d): unknown power state %d\n", + typec->id, typec->data_status[3]); + } + + if (!connected) { + if (typec->partner_altmode) { + cix_pd_altmode_set_active(typec, false); + typec_unregister_altmode(typec->partner_altmode); + typec->partner_altmode = NULL; + } + if (typec->partner) { + typec_unregister_partner(typec->partner); + typec->partner = NULL; + } + } else { + if (!typec->partner) { + typec->partner = typec_register_partner(typec->port, + &typec->desc); + if (IS_ERR(typec->partner)) { + dev_err(typec->dev, + "typec port(%d): failed to register partner: %ld\n", + typec->id, PTR_ERR(typec->partner)); + typec->partner = NULL; + } + } + + if (typec->partner_altmode && !dp) { + cix_pd_altmode_set_active(typec, false); + typec_unregister_altmode(typec->partner_altmode); + typec->partner_altmode = NULL; + } + + if (typec->partner && dp && !typec->partner_altmode) { + typec->partner_altmode = + typec_partner_register_altmode(typec->partner, + &cix_pd_dp_partner_altmode); + if (IS_ERR(typec->partner_altmode)) { + dev_err(typec->dev, + "typec port(%d): failed to register DP altmode: %ld\n", + typec->id, + PTR_ERR(typec->partner_altmode)); + typec->partner_altmode = NULL; + } + } + + if (typec->partner_altmode) + cix_pd_altmode_set_active(typec, true); + } + + dp_data->status = 0; + typec->state.data = NULL; + typec->state.alt = NULL; + + /* + * Only pass a DisplayPort state to the mux when the partner's + * alternate mode was registered successfully. + */ + if (connected && dp && typec->partner_altmode) { + dp_data->status = DP_STATUS_ENABLED; + if (typec->data_status[2] & HPD_STATE) + dp_data->status |= DP_STATUS_HPD_STATE; + if (typec->data_status[2] & HPD_IRQ) + dp_data->status |= DP_STATUS_IRQ_HPD; + + typec->state.data = dp_data; + typec->state.alt = typec->port_altmode; + typec->state.mode = usb3 ? TYPEC_DP_STATE_D : + TYPEC_DP_STATE_E; + } else if (connected && (usb2 || usb3)) { + typec->state.mode = TYPEC_STATE_USB; + } else { + typec->state.mode = TYPEC_STATE_SAFE; + } + + ret = typec_mux_set(typec->mux, &typec->state); + if (ret) + return ret; + + if (typec->mode == typec->state.mode && + typec->hpd_status == dp_data->status) + return 0; + + if (typec->state.mode == TYPEC_DP_STATE_D) + dev_dbg(typec->dev, + "typec port(%d): alt mode(%s) orientation(%s), usb_data_role(%s), power role(%s), hpd_state(%d)\n", + typec->id, dp_usb_mode, + orientation == TYPEC_ORIENTATION_REVERSE ? + orientation_reverse : orientation_normal, + role == USB_ROLE_DEVICE ? data_device : data_host, + cix_pd_pwr_role_str(typec), + (int)(dp_data->status & DP_STATUS_HPD_STATE)); + else if (typec->state.mode == TYPEC_DP_STATE_E) + dev_dbg(typec->dev, + "typec port(%d): alt mode(%s) orientation(%s), power role(%s), hpd_state(%d)\n", + typec->id, dp_only_mode, + orientation == TYPEC_ORIENTATION_REVERSE ? + orientation_reverse : orientation_normal, + cix_pd_pwr_role_str(typec), + (int)(dp_data->status & DP_STATUS_HPD_STATE)); + else if (typec->state.mode == TYPEC_STATE_USB) + dev_dbg(typec->dev, + "typec port(%d): alt mode(%s) orientation(%s), power role(%s), usb_data_role(%s)\n", + typec->id, usb_mode, + orientation == TYPEC_ORIENTATION_REVERSE ? + orientation_reverse : orientation_normal, + cix_pd_pwr_role_str(typec), + role == USB_ROLE_DEVICE ? data_device : data_host); + else if (typec->state.mode == TYPEC_STATE_SAFE) + dev_dbg(typec->dev, "typec port(%d): disconnect state\n", + typec->id); + + typec->mode = typec->state.mode; + typec->hpd_status = dp_data->status; + + return 0; +} + +static void cix_pd_typec_init_state(struct cix_pd *typec) +{ + typec->state.alt = NULL; + typec->state.mode = TYPEC_STATE_SAFE; + typec->state.data = NULL; + typec->partner = NULL; + typec->desc.accessory = TYPEC_ACCESSORY_NONE; + /* + * The data status registers only report the source/sink state, not + * whether USB PD is being used, so the partner is not advertised as + * PD capable. + */ + typec->desc.usb_pd = 0; +} + +/* + * Returns 1 when the reported port state changed or an HPD interrupt was + * handled, 0 when there was nothing to report, and a negative error code when + * the controller could not be accessed. + */ +static int cix_pd_event_handler(struct cix_pd *rts, bool clear_irq, bool force) +{ + int ret, err = 0; + bool hpd_irq, changed; + u8 data_control[3] = {0}; + + mutex_lock(&rts->lock); + + if (clear_irq) { + data_control[0] = 2; + data_control[1] = I2C_INT_ACK_BIT; + data_control[2] = 0; + + ret = cix_pd_block_write(rts, RTS_DATA_CONTROL, data_control, 3); + if (ret) + goto i2c_err; + } + + ret = cix_pd_block_read(rts, RTS_DATA_STATUS, rts->data_status, 6); + if (ret) + goto i2c_err; + + dev_dbg(rts->dev, + "typec port(%d): data status = 0x%x, 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", + rts->id, rts->data_status[0], rts->data_status[1], + rts->data_status[2], rts->data_status[3], rts->data_status[4], + rts->data_status[5]); + + hpd_irq = rts->data_status[2] & HPD_IRQ; + + /* + * HPD_IRQ is an event bit which stays set until it is acknowledged + * below, so it is excluded from the comparison: the acknowledged + * status would otherwise look different on the next read. Byte 0 and + * bytes 4..5 are not decoded, so a change in them is not a port + * event either. + */ + changed = !rts->status_valid || + rts->data_status[1] != rts->prev_status[1] || + (rts->data_status[2] & ~HPD_IRQ) != + (rts->prev_status[2] & ~HPD_IRQ) || + rts->data_status[3] != rts->prev_status[3]; + + memcpy(rts->prev_status, rts->data_status, DATA_STATUS_COUNT); + rts->status_valid = true; + + /* + * Reprogram the port only when one of the decoded bits changed, when + * an HPD interrupt arrived, or when the caller forces a refresh after + * system resume. The ports share one interrupt line, so a sibling's + * interrupt must not re-report an unchanged orientation and power + * role to the Type-C class. + */ + if (changed || hpd_irq || force) { + err = cix_pd_typec_port_update(rts, force); + if (err) { + /* + * Invalidate the cached status so that the update is + * retried on the next interrupt or on system resume + * instead of being lost with the acknowledged event. + */ + rts->status_valid = false; + dev_err(rts->dev, + "typec port(%d): failed to update port: %d\n", + rts->id, err); + } + } + + if (hpd_irq) { + data_control[0] = 2; + data_control[1] = 0; + data_control[2] = HPD_IRQ_ACK; + ret = cix_pd_block_write(rts, RTS_DATA_CONTROL, data_control, 3); + if (ret) + goto i2c_err; + } + + mutex_unlock(&rts->lock); + return (changed || hpd_irq) ? 1 : 0; + +i2c_err: + /* + * Report the controller as unresponsive so the IRQ handler can tell + * the interrupt core that this instance did not handle the event. + */ + dev_err(rts->dev, "typec port(%d): i2c transfer error = %d\n", + rts->id, ret); + mutex_unlock(&rts->lock); + return -ESHUTDOWN; +} + +static int cix_pd_typec_parse_port_props(struct typec_capability *cap, + struct fwnode_handle *fwnode, + struct device *dev) +{ + int ret; + + memset(cap, 0, sizeof(*cap)); + ret = typec_get_fw_cap(cap, fwnode); + if (ret) { + /* + * typec_get_fw_cap() stores a borrowed reference without + * taking it, so it must not be dropped by the caller. + */ + cap->fwnode = NULL; + return dev_err_probe(dev, ret, + "failed to parse connector properties\n"); + } + + cap->fwnode = fwnode_handle_get(fwnode); + cap->orientation_aware = true; + /* Alternate modes are entered and exited by the controller firmware. */ + cap->no_mode_control = true; + + return 0; +} + +static int cix_pd_typec_get_handles(struct cix_pd *typec, + struct fwnode_handle *fwnode, + struct device *dev) +{ + int ret; + + typec->mux = fwnode_typec_mux_get(fwnode); + if (IS_ERR(typec->mux)) + return dev_err_probe(dev, PTR_ERR(typec->mux), + "failed to get mux\n"); + + typec->role_sw = fwnode_usb_role_switch_get(fwnode); + if (IS_ERR(typec->role_sw)) { + ret = PTR_ERR(typec->role_sw); + typec->role_sw = NULL; + typec_mux_put(typec->mux); + typec->mux = NULL; + return dev_err_probe(dev, ret, + "failed to get USB role switch\n"); + } + + if (!typec->mux) + dev_dbg(dev, "mux not found\n"); + + return 0; +} + +static void cix_pd_unregister_ports(struct cix_pd *typec) +{ + if (!IS_ERR_OR_NULL(typec->port)) { + typec->state.alt = NULL; + typec->state.mode = TYPEC_STATE_SAFE; + typec->state.data = NULL; + usb_role_switch_set_role(typec->role_sw, USB_ROLE_NONE); + typec_set_orientation(typec->port, TYPEC_ORIENTATION_NONE); + typec_mux_set(typec->mux, &typec->state); + + if (typec->partner_altmode) + cix_pd_altmode_set_active(typec, false); + typec_unregister_altmode(typec->partner_altmode); + typec->partner_altmode = NULL; + typec_unregister_partner(typec->partner); + typec->partner = NULL; + typec_unregister_altmode(typec->port_altmode); + typec->port_altmode = NULL; + + typec_unregister_port(typec->port); + typec->port = NULL; + } + + usb_role_switch_put(typec->role_sw); + typec->role_sw = NULL; + typec_mux_put(typec->mux); + typec->mux = NULL; + fwnode_handle_put(typec->caps.fwnode); + typec->caps.fwnode = NULL; +} + +static irqreturn_t cix_pd_irq_handle(int irq, void *data) +{ + struct cix_pd *rts = data; + int ret; + + /* + * The Type-C ports of this platform are wired to one shared, + * level-triggered interrupt line and the controller has no + * per-instance pending bit, so the interrupt is attributed by + * comparing the port status with the previously reported one. The + * controller interrupt is acknowledged in any case, but an unchanged + * status is reported as IRQ_NONE: if a sibling keeps the shared line + * asserted without ever clearing its interrupt, the spurious + * interrupt detector can then eventually disable the line instead of + * leaving the system in an interrupt storm. + */ + ret = cix_pd_event_handler(rts, true, false); + return ret > 0 ? IRQ_HANDLED : IRQ_NONE; +} + +static int cix_pd_init_ports(struct cix_pd *typec) +{ + struct device *dev = typec->dev; + struct typec_altmode_desc desc = cix_pd_dp_port_altmode; + struct fwnode_handle *fwnode; + int ret; + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + return dev_err_probe(dev, -ENODEV, "no connector node found\n"); + + ret = cix_pd_typec_get_handles(typec, fwnode, dev); + if (ret) + goto out_put_fwnode; + + ret = cix_pd_typec_parse_port_props(&typec->caps, fwnode, dev); + if (ret) + goto out_unregister_ports; + + typec->port = typec_register_port(dev, &typec->caps); + if (IS_ERR(typec->port)) { + ret = PTR_ERR(typec->port); + typec->port = NULL; + dev_err_probe(dev, ret, "failed to register port\n"); + goto out_unregister_ports; + } + + desc.roles = typec->caps.data; + typec->port_altmode = typec_port_register_altmode(typec->port, &desc); + if (IS_ERR(typec->port_altmode)) { + ret = PTR_ERR(typec->port_altmode); + typec->port_altmode = NULL; + dev_err_probe(dev, ret, "failed to register DP altmode\n"); + goto out_unregister_ports; + } + + fwnode_handle_put(fwnode); + + return 0; + +out_unregister_ports: + cix_pd_unregister_ports(typec); +out_put_fwnode: + fwnode_handle_put(fwnode); + return ret; +} + +static int cix_pd_probe(struct i2c_client *client) +{ + struct cix_pd *rts; + int ret; + + rts = devm_kzalloc(&client->dev, sizeof(*rts), GFP_KERNEL); + if (!rts) + return -ENOMEM; + + rts->dev = &client->dev; + mutex_init(&rts->lock); + cix_pd_typec_init_state(rts); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return dev_err_probe(&client->dev, -ENODEV, + "i2c check functionality failed\n"); + + rts->regmap = devm_regmap_init_i2c(client, &cix_pd_regmap_config); + if (IS_ERR(rts->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(rts->regmap), + "failed to init regmap\n"); + + i2c_set_clientdata(client, rts); + rts->id = client->addr; + + ret = cix_pd_init_ports(rts); + if (ret) + return ret; + + /* + * Acknowledge any interrupt the controller raised before the IRQ was + * requested, so the shared line is not left asserted by this instance, + * and program the port state once so that the switch and the mux are + * in a known state even when no cable is attached. + */ + ret = cix_pd_event_handler(rts, true, true); + if (ret < 0) { + dev_err(&client->dev, "failed to read initial status: %d\n", ret); + if (ret == -ESHUTDOWN) + ret = -EIO; + goto err_unregister_ports; + } + + if (client->irq > 0) { + ret = request_threaded_irq(client->irq, NULL, cix_pd_irq_handle, + IRQF_SHARED | IRQF_ONESHOT, + dev_name(&client->dev), rts); + if (ret) { + dev_err(&client->dev, "failed to request irq: %d\n", ret); + goto err_unregister_ports; + } + } + + return 0; + +err_unregister_ports: + cix_pd_unregister_ports(rts); + return ret; +} + +static void cix_pd_remove(struct i2c_client *client) +{ + struct cix_pd *rts = i2c_get_clientdata(client); + + if (client->irq > 0) + free_irq(client->irq, rts); + + cix_pd_unregister_ports(rts); +} + +static const struct of_device_id cix_pd_of_match[] = { + { .compatible = "realtek,rts5453h", }, + {} +}; +MODULE_DEVICE_TABLE(of, cix_pd_of_match); + +static const struct i2c_device_id cix_pd_id[] = { + { .name = "rts5453h" }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cix_pd_id); + +static int __maybe_unused cix_pd_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + /* + * The controller is not accessible once the parent I2C adapter is + * suspended, so keep the interrupt masked for the whole sleep. The line + * is level-triggered and shared by the ports: left enabled, a cable + * event would loop in the handler, which could not acknowledge the + * controller before ->resume(). The parent adapter is still alive here + * because children are suspended first, so disable_irq() can safely + * wait for an in-flight handler to finish. + */ + if (client->irq > 0) + disable_irq(client->irq); + + return 0; +} + +static int __maybe_unused cix_pd_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cix_pd *rts = i2c_get_clientdata(client); + int ret; + + /* + * Read the status the controller kept while the system was asleep and + * acknowledge it. The parent I2C adapter is always resumed before this + * device, and the interrupt is still masked. + */ + ret = cix_pd_event_handler(rts, true, true); + + if (client->irq > 0) + enable_irq(client->irq); + + if (ret < 0) { + dev_err(dev, "failed to refresh status: %d\n", ret); + return ret == -ESHUTDOWN ? -EIO : ret; + } + + return 0; +} + +static const struct dev_pm_ops cix_pd_pm_ops = { + .suspend = pm_sleep_ptr(cix_pd_suspend), + .resume = pm_sleep_ptr(cix_pd_resume), + .freeze = pm_sleep_ptr(cix_pd_suspend), + .thaw = pm_sleep_ptr(cix_pd_resume), + .poweroff = pm_sleep_ptr(cix_pd_suspend), + .restore = pm_sleep_ptr(cix_pd_resume), +}; + +static struct i2c_driver cix_pd_i2c_driver = { + .driver = { + .name = "rts5453h", + .of_match_table = cix_pd_of_match, + .pm = pm_ptr(&cix_pd_pm_ops), + }, + .id_table = cix_pd_id, + .probe = cix_pd_probe, + .remove = cix_pd_remove, +}; + +module_i2c_driver(cix_pd_i2c_driver); +MODULE_DESCRIPTION("CIX Type-C PD controller driver"); +MODULE_AUTHOR("Chao Zeng "); +MODULE_AUTHOR("Gary Yang "); +MODULE_LICENSE("GPL"); -- 2.50.1