mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yaohan Li <shunsheng1218@gmail.com>
To: jeff.hugo@oss.qualcomm.com, ogabbay@kernel.org
Cc: carl.vanderlip@oss.qualcomm.com, linux-arm-msm@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	jacek.lawrynowicz@linux.intel.com, quic_pkanojiy@quicinc.com,
	stanislaw.gruszka@linux.intel.com
Subject: [PATCH] accel/qaic: drain the control workqueue before the device is freed
Date: Wed, 18 Nov 2026 15:24:48 +0800	[thread overview]
Message-ID: <20261118072448.1259909-1-shunsheng1218@gmail.com> (raw)

qaic_pci_remove() tears the MHI controller down and destroys the DRM
device, but nothing drains qdev->cntl_wq.  qdev itself is allocated with
devm_kzalloc_flex() and is freed as soon as the PCI device is unbound,
while cntl_wq is a DRM-managed resource that survives until the last
open file drops its reference to the DRM device.

resp_work is queued from qaic_mhi_dl_xfer_cb() and resp_worker()
dereferences qdev, so a work item that is still queued, or still
running, when the driver instance goes away touches freed memory.

mhi_power_down() moves the controller to the shutdown state, disables
the interrupt and flushes the state worker that destroys the channel
devices, and mhi_unregister_controller() removes the controller, so no
data event can reach qaic_mhi_dl_xfer_cb() once
qaic_mhi_free_controller() has returned.  Flushing the workqueue after
it therefore covers every work item that can still be queued.

Fixes: c501ca23a6a3 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Yaohan Li <shunsheng1218@gmail.com>
---
Prepared against v7.4-rc1-1969-g666539eecdf4.

AI assistance: the analysis, the change and its review notes were
prepared with Claude (Anthropic) as a coding assistant.  The author
reviewed the reasoning and takes responsibility for the content.

Testing: compile tested only (arm64, gcc 11.4).  No QAIC hardware was
available, so the teardown race was not run.
 drivers/accel/qaic/qaic_drv.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/accel/qaic/qaic_drv.c b/drivers/accel/qaic/qaic_drv.c
index 90c0d31e414a..c4c3f450e67b 100644
--- a/drivers/accel/qaic/qaic_drv.c
+++ b/drivers/accel/qaic/qaic_drv.c
@@ -625,6 +625,15 @@ static void qaic_pci_remove(struct pci_dev *pdev)
 
 	qaic_dev_reset_clean_local_state(qdev);
 	qaic_mhi_free_controller(qdev->mhi_cntrl, link_up);
+
+	/*
+	 * The control channel is gone, so nothing can queue resp_work any
+	 * more.  Drain it before qdev is freed: the workqueue belongs to the
+	 * DRM device and may outlive this driver instance, and resp_worker()
+	 * dereferences qdev.
+	 */
+	flush_workqueue(qdev->cntl_wq);
+
 	qaic_destroy_drm_device(qdev, QAIC_NO_PARTITION);
 }
 
-- 
2.34.1


                 reply	other threads:[~2026-11-18  7:24 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118072448.1259909-1-shunsheng1218@gmail.com \
    --to=shunsheng1218@gmail.com \
    --cc=carl.vanderlip@oss.qualcomm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jacek.lawrynowicz@linux.intel.com \
    --cc=jeff.hugo@oss.qualcomm.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ogabbay@kernel.org \
    --cc=quic_pkanojiy@quicinc.com \
    --cc=stanislaw.gruszka@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®