mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: Frank Li <Frank.Li@nxp.com>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
	Stefano Radaelli <stefano.r@variscite.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v1 1/1] arm64: dts: freescale: imx93-var: Add Cortex-M33 configurations
Date: Wed, 18 Nov 2026 17:57:19 +0100	[thread overview]
Message-ID: <20261118165719.46297-1-stefano.r@variscite.com> (raw)

From: Stefano Radaelli <stefano.r@variscite.com>

Add Cortex-M33 overlays and combined DTBs for DART-MX93 on Sonata and
VAR-SOM-MX93 on Symphony.

Share the remoteproc and mailbox configuration through a common include.
Reuse the reserved memory from each carrier DTS, preserving the different
resource table addresses.

Reserve the peripherals used by the M33 firmware and disable Wi-Fi,
Bluetooth and the devices depending on GPIO4. On Sonata, also disable USB
OTG1 because its USB-C role controller is unavailable.

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
This patch uses the memory-region-names binding and driver support from
the following commits, both already in linux-next:

- ebb21cc5d1c0 ("dt-bindings: remoteproc: imx_rproc: Document
  memory-region-names to avoid implicit ABI")
- 8396089f91fa ("remoteproc: imx_rpoc: Use memory-region-names to avoid
  implicit ABI")

For dtbs_check on older trees, commit cebd1c0961d8 ("dt-bindings: gpio:
vf610: fix clock requirements per SoC"), also in linux-next, fixes the
pre-existing GPIO clock validation errors.

 arch/arm64/boot/dts/freescale/Makefile        |  9 +++
 .../dts/freescale/imx93-var-common-m33.dtsi   | 24 ++++++++
 .../freescale/imx93-var-dart-sonata-m33.dtso  | 55 +++++++++++++++++++
 .../dts/freescale/imx93-var-dart-sonata.dts   |  2 +-
 .../freescale/imx93-var-som-symphony-m33.dtso | 50 +++++++++++++++++
 5 files changed, 139 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index cfd548284358..05a7556e9de9 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -956,8 +956,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-lvds-tm070jvhg33.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-ezurio-wlan.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla-mini-lvds-tm070jvhg33.dtb
+
+imx93-var-dart-sonata-m33-dtbs := imx93-var-dart-sonata.dtb imx93-var-dart-sonata-m33.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata-m33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-dart-sonata-m33.dtbo
+
+imx93-var-som-symphony-m33-dtbs := imx93-var-som-symphony.dtb imx93-var-som-symphony-m33.dtbo
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony-m33.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony-m33.dtbo
+
 dtb-$(CONFIG_ARCH_MXC) += imx93w-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93w-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
new file mode 100644
index 000000000000..51b4cfe143d4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-common-m33.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common Cortex-M33 configuration for Variscite i.MX93 modules
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/* Use the reserved memory and resource table address from the carrier DTS. */
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1
+		  &mu1 1 1
+		  &mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	memory-region-names = "vdev0buffer", "vdev0vring0", "vdev0vring1",
+			      "vdev1vring0", "vdev1vring1", "rsc-table";
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
new file mode 100644
index 000000000000..d97da9916ef4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata-m33.dtso
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M33 support for Variscite DART-MX93 on Sonata-Board
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx93-var-common-m33.dtsi"
+
+/* Reserve the peripherals used by the Cortex-M33 firmware. */
+&flexcan1 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&lpspi5 {
+	status = "disabled";
+};
+
+/* Disable Bluetooth along with Wi-Fi and release the JTAG pins. */
+&lpuart5 {
+	status = "disabled";
+};
+
+&lpuart7 {
+	status = "disabled";
+};
+
+/* The USB-C role controller uses an interrupt on GPIO4. */
+&ptn5150 {
+	status = "disabled";
+};
+
+/* The USB-C role controller is unavailable. */
+&usbotg1 {
+	status = "disabled";
+};
+
+/* Wi-Fi reset is connected to GPIO4. */
+&usdhc3 {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
index 1ca3ec8330d0..e3afd0efe5c7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-dart-sonata.dts
@@ -291,7 +291,7 @@ ft5x06_ts: touchscreen@38 {
 	};
 
 	/* USB Type-C Controller */
-	typec@3d {
+	ptn5150: typec@3d {
 		compatible = "nxp,ptn5150";
 		reg = <0x3d>;
 		interrupt-parent = <&gpio4>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
new file mode 100644
index 000000000000..96860a2dbf7c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony-m33.dtso
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Cortex-M33 support for Variscite VAR-SOM-MX93 on Symphony-Board
+ *
+ * Link: https://variscite.com/carrier-boards/symphony-board/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include "imx93-var-common-m33.dtsi"
+
+/* The resistive touchscreen uses GPIO4. */
+&ads7846 {
+	status = "disabled";
+};
+
+/* Reserve the peripherals used by the Cortex-M33 firmware. */
+&flexcan1 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&lpspi6 {
+	status = "disabled";
+};
+
+/* Disable Bluetooth along with Wi-Fi and release the JTAG pins. */
+&lpuart5 {
+	status = "disabled";
+};
+
+&lpuart7 {
+	status = "disabled";
+};
+
+/* Wi-Fi reset is connected to GPIO4. */
+&usdhc3 {
+	status = "disabled";
+};
+
+&usdhc3_pwrseq {
+	status = "disabled";
+};
-- 
2.47.3


                 reply	other threads:[~2026-11-18 16:57 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118165719.46297-1-stefano.r@variscite.com \
    --to=stefano.radaelli21@gmail.com \
    --cc=Frank.Li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pierluigi.p@variscite.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=stefano.r@variscite.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®