mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Long Zhao via B4 Relay <devnull+longzhao.ambarella.com@kernel.org>
To: Arnd Bergmann <arnd@arndb.de>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	 Alexandre Belloni <alexandre.belloni@bootlin.com>,
	soc@lists.linux.dev,  linux-arm-kernel@lists.infradead.org,
	 Michael Turquette <mturquette@baylibre.com>,
	 Stephen Boyd <sboyd@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	linux-clk@vger.kernel.org,  Brian Masney <masneyb@kernel.org>,
	 Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	 Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	 devicetree@vger.kernel.org, Long Zhao <longzhao@ambarella.com>,
	 Long Zhao <zl020895@163.com>,
	linux-kernel@vger.kernel.org,  Linus Walleij <linusw@kernel.org>
Subject: [PATCH v12 0/6] arm64: add Ambarella CV75 SoC support
Date: Thu, 19 Nov 2026 18:13:18 +0800	[thread overview]
Message-ID: <20261119-cv75-soc-v12-0-e5a03cca8b05@ambarella.com> (raw)

Add the Ambarella CV75 SoC and EVK support: the board binding, the
RCT clock binding and driver, ARCH_AMBARELLA, the devicetree and
MAINTAINERS.

Apply the patches in this order:

1. board binding
2. RCT clock binding and clock ID header
3. ARCH_AMBARELLA
4. RCT clock driver
5. CV75 SoC and EVK device tree, plus defconfig
6. MAINTAINERS

The ambarella vendor prefix and the CV75 secure scratchpad syscon
binding are already in linux-next. This series does not repeat
either of them.

GPIO, UART and pinctrl bindings and drivers are separate series.
This devicetree references those compatibles.

Tested on the CV75 EVK. The board boots. That boot used a local tree
that also includes the GPIO, UART and pinctrl patches.

To: Arnd Bergmann <arnd@arndb.de>
To: Krzysztof Kozlowski <krzk@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: soc@lists.linux.dev
To: linux-arm-kernel@lists.infradead.org
To: Michael Turquette <mturquette@baylibre.com>
To: Stephen Boyd <sboyd@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: linux-clk@vger.kernel.org
Cc: Brian Masney <masneyb@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Long Zhao <longzhao@ambarella.com>
Cc: Long Zhao <zl020895@163.com>
Cc: linux-kernel@vger.kernel.org

Signed-off-by: Long Zhao <longzhao@ambarella.com>
---
Changes in v12:
- Split ARCH_AMBARELLA out of the EVK DT patch into its own patch,
  right after the two dt-bindings, so an immutable branch can carry
  the bindings and this symbol. The CV75 device tree and defconfig
  stay a separate patch. (Brian)
- Link to v11:
  https://patch.msgid.link/20261105-cv75-soc-v11-0-aa6ee0b2380d@ambarella.com

Changes in v11:
- clk: use builtin_platform_driver(). The Kconfig symbol is bool. (Brian)
- clk: drop CLK_IS_CRITICAL from the core PLL. It has no enable op. (Brian)
- clk: drop the misleading (u64) cast in the div_u64() call. (Brian)
- clk: add .suppress_bind_attrs = true to block sysfs unbind. (Brian)
- clk: drop MODULE_AUTHOR. (Brian)
- Link to v10:
  https://patch.msgid.link/20261019-cv75-soc-v10-0-d386065e2dd5@ambarella.com

---
Long Zhao (6):
      dt-bindings: arm: add Ambarella CV75 platforms
      dt-bindings: clock: add Ambarella CV75 RCT
      arm64: add ARCH_AMBARELLA
      clk: ambarella: add CV75 RCT clock controller
      arm64: dts: ambarella: add CV75 SoC and EVK
      MAINTAINERS: add ARM/AMBARELLA SoC support

 .../devicetree/bindings/arm/ambarella.yaml         |  24 ++
 .../bindings/clock/ambarella,cv75-rct.yaml         |  64 ++++
 MAINTAINERS                                        |  14 +
 arch/arm64/Kconfig.platforms                       |   6 +
 arch/arm64/boot/dts/Makefile                       |   1 +
 arch/arm64/boot/dts/ambarella/Makefile             |   3 +
 arch/arm64/boot/dts/ambarella/cv75-evk.dts         |  30 ++
 arch/arm64/boot/dts/ambarella/cv75.dtsi            | 177 ++++++++++
 arch/arm64/configs/defconfig                       |   1 +
 drivers/clk/Kconfig                                |   1 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/ambarella/Kconfig                      |   8 +
 drivers/clk/ambarella/Makefile                     |   3 +
 drivers/clk/ambarella/clk-cv75.c                   | 361 +++++++++++++++++++++
 include/dt-bindings/clock/ambarella,cv75-rct.h     |  14 +
 15 files changed, 708 insertions(+)
---
base-commit: 34cf6dafc47441dfb6b356a095b89c3585a93714
change-id: 20261007-cv75-soc-e628f357f066

Best regards,
--  
Long Zhao <longzhao@ambarella.com>



             reply	other threads:[~2026-11-19 10:13 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-19 10:13 Long Zhao via B4 Relay [this message]
2026-11-19 10:13 ` [PATCH v12 1/6] dt-bindings: arm: add Ambarella CV75 platforms Long Zhao via B4 Relay
2026-11-19 10:13 ` [PATCH v12 2/6] dt-bindings: clock: add Ambarella CV75 RCT Long Zhao via B4 Relay
2026-11-19 10:13 ` [PATCH v12 3/6] arm64: add ARCH_AMBARELLA Long Zhao via B4 Relay
2026-11-19 10:13 ` [PATCH v12 4/6] clk: ambarella: add CV75 RCT clock controller Long Zhao via B4 Relay
2026-11-19 10:22   ` Andy Shevchenko
2026-11-19 10:13 ` [PATCH v12 5/6] arm64: dts: ambarella: add CV75 SoC and EVK Long Zhao via B4 Relay
2026-11-19 10:13 ` [PATCH v12 6/6] MAINTAINERS: add ARM/AMBARELLA SoC support Long Zhao via B4 Relay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261119-cv75-soc-v12-0-e5a03cca8b05@ambarella.com \
    --to=devnull+longzhao.ambarella.com@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=linusw@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=longzhao@ambarella.com \
    --cc=masneyb@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=soc@lists.linux.dev \
    --cc=will@kernel.org \
    --cc=zl020895@163.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®